Materials engineering topic list of research papers
-
Detecting Impulses in Mechanical Signals by Wavelets2004 / W.-X. Yang, X.-M. Ren
-
The Influence of Air Currents on People and Facilities Near Railway
Abstract It is studied influence of the dynamic pressure of the air flow on people and equipment based on the methods that have been tested experimentally. It also analyzes the effects of pressure field on the surface of the vehicle in stationary...
2015 / Ioan Sebesan, Sorin Arsene, Gabriel Popa -
Effect of Rigid Boundary on the Propagation of Torsional Surface Waves in Initially Stressed Gravitating Dry Sandy Medium
Abstract The paper aims to study, the effect of rigid boundary on the propagation of torsional surface waves in initially stressed gravitating dry sandy half space. The mathematical analysis of the problem has been dealt with the Whittaker function. ...
2016 / S. Gupta, Aeny Satbhaiya, Meena -
Analytical Model of Light Beam Diffraction on Holographic Polarization Spatially Inhomogeneous Photonic PDLC Structures
Abstract In this paper the analytical model of arbitrary polarized light beam diffraction on the holographic polarization spatially inhomogeneous photonic structures, formed in the polymer-dispersed liquid crystals (PDLC) is developed. The...
2015 / A.O. Semkin, S.N. Sharangovich -
Studies on Structural Defects on 60Co Irradiated Multi Walled Carbon Nanotubes.
Abstract An attempt is made to study the effects of gamma irradiation on multi walled carbon nanotubes (MWCNTs) with a specific focus on surface modification, structural changes and identification of irradiation generated defects on their surface....
2014 / P.S. Rama Sreekanth, K. Acharyya, I. Talukdar, S. Kanagaraj -
Design and Experimental Study of Novel Piezoelectric Vibration Energy Impact Mass Harvester
Abstract Electricity is the greatest crisis in the world on one side and another side is environmental pollution is caused by E-waste especially due to smart devices such as mobile phones, laptops, compact devices, computer spare parts,...
2016 / K. Viswanath Allamraju, K. Srikanth -
The Possibility of using DMD SLM for Hologram Filters Displaying in Dispersive Correlator
Abstract The possibility of using DMD-modulator as a device for dynamic displaying of holographic filters in the scheme of the dispersive correlator with single objective was considered. Binary Fourier holograms were displayed on DMD-modulator. The...
2015 / D.Yu. Molodtsov, V.G. Rodin, S.N. Starikov -
Constant and Variable-amplitude Loading of Aluminum Alloy 7075 in the VHCF Regime
Abstract The aim of this study is to quantify the influence of VHCF cycles on fatigue life of 7075-T6 Al-alloys using both constant and variable amplitude loading. Constant amplitude loading tests with and without superimposed mean levels were...
2015 / M. Meischel, S.E. Stanzl-Tschegg, A. Arcari, N. Iyyer, N. Apetre, et al. -
Off-resonance Operation of In-plane Torsional MEMS Magnetometers
Abstract The work presents a MEMS magnetometer for compass applications, which measures magnetic fields along an in-plane direction. The magnetometer is built with the surface micromachining process used for consumer gyroscopes, accelerometers, and...
2014 / S. Dellea, G. Laghi, G. Langfelder, A. Longoni, P. Minotti, et al. -
Chunked N-Grams for Sentence Validation
Abstract This paper deals with Sentence Validation - a sub-field of Natural Language Processing. Sentence Validation refers to verification of “Natural Language” sentence on basis of its syntax and semantics. Sentence Validation is ...
2015 / Kush Jain, Priya Khatri, Garima Indolia -
The Effect of Microwave Sintering on the Microstructure and Properties of Calcium Phosphate Ceramic
Abstract Despite good ability to improved biological affinity and activity of calcium phosphate (CP) ceramic to the surrounding host tissue when implanted, CP ceramic is capable to encourage direct bond with bone as their chemical compositions are...
2016 / Chuthathip Mangkonsu, Ishikawa Kunio, Lila Bunhan, Radzali Otman, Ahmad-Fauzi Mohd Noor -
Understanding of Fatigue Strength Improvement of Steel Structures by Hammer Peening Treatment
Abstract The effect of hammer peening on the fatigue resistance of high strength welded steel S690 has been investigated. Cyclic four points bending tests have been performed on butt weld samples, manually and automatically hammered. Microstructural ...
2015 / Fabien Lefebvre, Catherine Peyrac, Guillaume Elbel, C. Revilla-Gomez, Catherine Verdu, et al. -
I have a DRIHM: A Case Study in Lifting Computational Science Services Up to the Scientific Mainstream
Abstract While we are witnessing a transition from petascale to exascale computing, we experience, when teaching students and scientists to adopt distributed computing infrastructures for computational sciences, what Geoffrey A. Moore once coined...
2015 / Michael Schiffers, Nils gentschen Felde, Dieter Kranzlmüller -
HTS Dual-band Bandpass Filter Using Stub-loaded Hair-pin Resonators with Independently Controllable Bandwidths
Abstract We have developed a high-temperature superconducting (HTS) dual-band bandpass filter (BPF) using stub-loaded hair-pin resonators with independently controllable bandwidths. The proposed dual-band BPF is composed of five stub-loaded hair-pin ...
2015 / N. Sekiya, S. Sugiyama -
Steady- and Transient-State Analyses of Fully Ceramic Microencapsulated Fuel with Randomly Dispersed Tristructural Isotropic Particles via Two-Temperature Homogenized Model—I: Theory and Method
Abstract As a type of accident-tolerant fuel, fully ceramic microencapsulated (FCM) fuel was proposed after the Fukushima accident in Japan. The FCM fuel consists of tristructural isotropic particles randomly dispersed in a silicon carbide (SiC)...
2016 / Yoonhee Lee, Bumhee Cho, Nam Zin Cho -
Formation and Phase Transition of Ferrofluid Droplet Lattices
Abstract In this paper, we study the effect of magnetic films arrays on the self-assembly of ferrofluid droplets. By inducing the magnetic hydrodynamic instability we are able to realize the fission of a large ferrofluid droplet into a highly...
2014 / Chiun-Peng Lee, Wen-Lin Liu, Mei-Feng Lai -
The Platinum Development Initiative: Platinum-Based Alloys for High Temperature and Special Applications: Part II2009 / A. Douglas, P. J. Hill, T. Murakumo, L. A. Cornish, R. Süss
-
Start-up of World's First Commercial Post-combustion Coal Fired CCS Project: Contribution of Shell Cansolv to SaskPower Boundary Dam ICCS Project
Abstract The world's first commercial scale post-combustion coal fired carbon capture and storage project was started in September of this year at the SaskPower Boundary Dam Power Station in Estevan, Saskatchewan. Above and beyond being the process...
2014 / Karl Stéphenne -
Experimental Study of Flow Past Obstacles by PIV
Abstract The velocity field of flow past obstacles was surveyed by particle image velocimetry technique using 8μm Al2O3 powder as tracers. The flow field around the obstacles are obtained. The plots of the streamlines and the mean velocity field in...
2015 / Bin Liao, Shan-Qun Chen -
A Real-time Collision Prevention System for Machine Tools (part II)
Abstract In 2013, a real-time collision prevention approach based on static hulls was introduced at the 46th CIRP CMS. The present text describes the latest research results in this area. The main focus is the influence of the collision prevention...
2016 / Marco Schumann, Marco Witt, Philipp Klimant