Materials engineering topic list of research papers
-
Progress in the Industrial Evaluation of the mc-Si PERCT Technology Based on Boron Diffusion
Abstract In this paper, we present the recent progress of the evaluation of the multi Si PERCT technology in an industrial pilot production of the Chinese cell manufacturer Lu’an. Our technology is an alternative to the AlOx based PERC technology...
2015 / Andreas Teppe, Chun Gong, Kewei Zhao, Jin Liu, Sentao Wang, et al. -
On the Evolvement of Limiting Positions as a Result of the Interaction of Tolerances and Compliant Systems
Abstract When talking about a large batch production of a certain mechanical product it generally comes along with specific requirements in terms of dimensional management to guarantee a consistently high product quality ensuring that customer...
2016 / Matthias Ehlert, Robert Hofmann, Andreas Stockinger, Sandro Wartzack -
One Dimensional Finite Element Model to Study the Effect of Diffusion of Free Ca2+ in Hepatocytes
Abstract The main functional cell of the liver is hepatocyte. The frequently working of liver depends on the particular level of cytosolic Ca2+ in hepatocyte. Cytosolic calcium is a second messenger which responsible for reproduction. Calcium...
2015 / Vijendra Singh Rawat, Neeru Adlakha -
Effect of Testing Mode on Ratcheting and Post-ratcheting Tensile Properties of Annealed OFHC Copper
Abstract Asymmetric cyclic loading of annealed OFHC copper has been carried out under different stress combinations; bother under engineering and true stress-control mode. It is observed that accumulation of ratcehting deformation occurs rapidly...
2014 / Jayanta Kumar Mahato, Partha Sarathi De, Abhijnan Sarkar, Amrita Kundu, Pravash Chandra Chakrborti -
Preliminary Modelling Study of Ice Accretion on Wind Turbines
Abstract One of the main challenges associated with cold-climate wind energy is icing on wind turbines and a series of icing-induced problems such as production loss, blade fatigue and safety issues. Because of the difficulties with on-site...
2015 / Marie Cecilie Pedersen, Chungen Yin -
Modeling the Moisture Buffering Behavior of a Coated Biobased Building Material by Including Hysteresis
Abstract To investigate the influence of plastering on the moisture buffering behavior of hemp concrete, experiments are performed on two samples, one uncoated and one coated with less hygroscopic lime-based plasters. Global mass variations were...
2015 / Dylan Lelièvre, Thibaut Colinart, Patrick Glouannec -
Effect of Creep Exposure on Microstructure and Mechanical Properties of Modified 9Cr-1Mo Steel
Abstract The prolonged exposure at elevated temperatures under stress significantly alters the microstructure of steels resulting in degradation of the mechanical properties. Therefore, the assessment of structural integrity of high temperature...
2014 / P. Parameswaran, K.S. Chandravathi, K. Laha, V. Karthik, E. Mohandas, et al. -
Copper Nano- and Micro Wires Electrodeposited in Etched Cellulose Nitrate and Makrofol KG Nuclear Track Detector
Abstract Cellulose Nitrate and Makrofol KG nuclear track detector foils of 96μm and 20μm thicknesses were irradiated with 238U ions (kinetic energy 17.7 MeV/u, fluence 105 ion/cm2) and 208Pd (kinetic energy 14.0MeV/u, fluence 105 ion/cm2),...
2015 / B. Shakeri Jooybari, H. Afarideh, M. Lamehi-Racti, R. Moghimi, M. Ghergherehchi -
Experimental and modeling hydraulic studies of foam drilling fluid flowing through vertical smooth pipes
Abstract Foam has emerged as an efficient drilling fluid for the drilling of low pressure, fractured and matured reservoirs because of its the ability to reduce formation damage, fluid loss, differential sticking etc. However the compressible nature ...
2016 / Amit Saxena, A.K. Pathak, Keka Ojha, Shivanjali Sharma -
Elucidation of Softening Mechanism in Rinse Cycle Fabric Softeners. Part 1: Effect of Hydrogen Bonding2015 / Takako Igarashi, Naoki Morita, Yoshimasa Okamoto, Koichi Nakamura
-
19th Century Wooden Ship Sheathing. A Case of Study: The Materials of Puerto Pirámides 1, Península Valdés
Abstract Copper alloy sheathing used to protect ships hulls from different wood-infesting organisms (borers and foulers) was widespread since the late 18th century. In this work the characterization results of a sheathing fragment and tacks from the ...
2015 / Horacio M. De Rosa, Nicolás C. Ciarlo, Marcela Pichipil, Ana Castelli -
Enhanced perpendicular coercivity of ultrathin perpendicularly magnetized Tb–Fe–Co films on silicon substrates using a thin Pt underlayer
Abstract We have studied the effect of an additional thin Pt underlayer on the magnetic properties of ultrathin perpendicularly magnetized TbFeCo films grown on silicon substrates. We have demonstrated that the presence of a thin Pt underlayer can...
2016 / Bang Do, Hiroyuki Awano -
Heterobimetallic sol–gel precursors and intermediates2015 / Ulrich Schubert
-
Neutron Imaging Investigations of the Secondary Hydriding of Nuclear Fuel Cladding Alloys during Loss of Coolant Accidents
Abstract The hydrogen concentration and distribution at both sides of the burst opening of cladding tubes used in three QUENCH-LOCA simulation bundle experiments were investigated by means of neutron radiography and tomography. The quantitative...
2015 / M. Grosse, C. Roessger, J. Stuckert, M. Steinbrueck, A. Kaestner, et al. -
Optimizing Hydrothermal Scheduling with Non-Convex Irrigation Constraints: Case on the Chilean Electricity System
Abstract Water stored in large reservoirs can support various economic activities, such as electricity generation and agriculture, that need to be efficiently coordinated. Such coordination is usually undertaken through optimization models that use...
2016 / Eduardo Pereira-Bonvallet, Sebastian Püschel-Løvengreen, Marcelo Matus, Rodrigo Moreno -
Application of a Virtual and Ergonomic Framework for an Industrial Light Vehicle Concept Assembly Process: A Case Report
Abstract A systematic methodology has been applied with the help of virtual simulation tools for a conceptual study of an industrial light vehicle concept assembly. All workstations have been defined throughout the manufacturing process. With the...
2015 / A. Sánchez, M. Garcia, R. Domingo, A.M. Camacho, M. Sebastián -
Performance Study f V2O5/TiO2 Mixed Metal Oxide Nanocatalysts in Selective Catalytic Reduction of Nox Prepared by Co-Precipitation Method
Abstract In this work, the selective catalytic reduction of NO with NH3 in the presence of oxygen over a series of Vanadia-Titania was investigated. Catalysts prepared by Co-precipitation method with oxalic acid. Response surface methodology...
2015 / H. Soleimanzadeh, A. Niaei, D. Salari, S.M. Mousavi, A. Tarjamannejad -
Homogeneous Boiling Explosion Condition: From an Energy Point of View
Abstract When a liquid undergoes boiling by homogeneous nucleation during non-equilibrium heating is very important as the characteristics of the system before and after the occurrence of homogeneous boiling explosion is significantly different. In...
2014 / Mohammad Nasim Hasan, Ashik Hasan, Suhaimi Ilias, Yuichi Mitsutake, Masanori Monde -
Oxygen transmission of modified natural rubber, poly (lactic acid) and chitosan porous structures for wound dressing2015 / Sasiprapa Chitrattha, Thawatchai Phaechamud
-
KPI and LCA Evaluation of Integrated Microwave Technology for High Temperature Processes
Abstract Nearly a quarter of the energy consumption of Europe is required for industrial processes. Huge efficiency potentials can be exploited. One such is under research within the EU funded project DAPhNE by developing an integrated solution for...
2015 / C. Dorn, R. Behrend, D. Giannopoulos, L. Napolano, B. García Baños, et al.