Materials engineering topic list of research papers
-
Natural Products: A Minefield of Biomaterials2012 / Oladeji O. Ige, Lasisi E. Umoru, Sunday Aribo
-
CMIP5 update of ‘Inter-model variability and biases of the global water cycle in CMIP3 coupled climate models’2013 / Beate G Liepert, Fiona Lo
-
Charge transport and trapping in organic field effect transistors exposed to polar analytes2011 / Davianne Duarte, Deepak Sharma, Brian Cobb, Ananth Dodabalapur
-
Control of two-dimensional growth of AlN and high Al-content AlGaN-based MQWs for deep-UV LEDs2013 / Weihuang Yang, Jinchai Li, Wei Lin, Shuping Li, Hangyang Chen, et al.
-
Biodegradability engineering of biodegradable Mg alloys: Tailoring the electrochemical properties and microstructure of constituent phases2013 / Pil-Ryung Cha, Hyung-Seop Han, Gui-Fu Yang, Yu-Chan Kim, Ki-Ha Hong, et al.
-
Highly c-axis oriented growth of GaN film on sapphire (0001) by laser molecular beam epitaxy using HVPE grown GaN bulk target2013 / S. S. Kushvaha, M. Senthil Kumar, K. K. Maurya, M. K. Dalai, Nita D. Sharma
-
An auxiliary capacitor based ultrafast drive circuit for shear piezoelectric motors2009 / Kamalesh Chatterjee, M. C. Boyer, W. D. Wise, E. W. Hudson
-
Wettability and Reactivity of ZrB2 Substrates with Liquid Al2016 / R. Nowak, N. Sobczak, G. Bruzda, J. Wojewoda-Budka, L. Litynska-Dobrzynska, et al.
-
Quantitative modelling of viscoelasticity of isotropic fibrous composites with viscoelastic matrices
Abstract Despite the wide usage of isotropic fibrous composites with a viscoelastic polymer matrix, no analytic model for their mechanical behaviour is known. This paper develops such a model for time-dependent Young's modulus, showing that for...
2011 / David J. Cottenden, Michelle L. Oyen -
Seismic Motion Control of a Column Using a Gyroscope
Abstract Taking advantage of the angular momentum of the rotating gyroscope, gyrostabilizer systems are expected to become more widely actualized as they provide an effective means of motion control with several significant advantages for various...
2015 / F. Ünker, O. Çuvalcı -
An Aerodynamic Study of a Domestic Scale Horizontal Axis Wind Turbine With Varied Tip Configurations
Abstract This paper primarily aims to investigate the aerodynamic characteristics of a small Horizontal Axis Wind Turbines (HAWT) with different blade tip configurations to enhance power generation efficiency. To understand the flow behavior at the...
2015 / Abdulkadir Ali, Harun Chowdhury, Bavin Loganathan, Firoz Alam -
Shipwreck Statistical Analysis and Suggestions for Ships Carrying Liquefiable Solid Bulk Cargoes in China
Abstract In order to grasp the reason of the wreck accident for ships carrying liquefiable solid bulk cargoes, and restrain the similar accidents happened again, the paper collects a decade of accident investigation reports or accident cases, counts ...
2014 / Cheng Xiaonan, Liu Minyan, He Longjun -
Energy survey of the coal based sponge iron industry
Abstract A survey is made on a typical coal based Indian sponge iron plant of capacity 500t/d in order to identify the largest energy losses and find ways to increase the efficiency. The required data are obtained by measurements or taken from...
2015 / Nishant R. Dey, Anil K. Prasad, Shravan K. Singh -
Effects of Circular Riblets Rough Microchannel on Friction and Fluid Flow using LBM
Abstract Simulation of fluid flow and friction in a circular shaped ribbed microchannel using the Lattice Boltzmann Method (LBM) has been studied in the present paper. In micro-flows, the local density variation is still relatively small, but the...
2015 / M.A. Taher, L.K. Saha, Y.W. Lee -
The Effect of Nanoparticles and Alternative Monomer on the Exothermic Temperature of PMMA Bone Cement
Abstract Poly methyl methacrylate (PMMA) cement produce exothermic reaction during its polymerization process, which damage the surrounding bone tissue during orthopedic surgery. Nanoparticles additives (magnesium oxide, hydroxyapatite, chitosan,...
2015 / Morshed Khandaker, Zhaotong Meng -
Influence of Granule Porosity during Fluidized Bed Spray Granulation
Abstract Fluidized bed spray granulation is an important process for the transformation of liquids into solid materials. Especially product properties like final particle size and structure of the granules are important. These properties are closely ...
2015 / Torsten Hoffmann, Christian Rieck, Andreas Bück, Mirko Peglow, Evangelos Tsotsas -
Multi-Frequency Band Pyroelectric Sensors2014 / Chun-Ching Hsiao, Sheng-Yi Liu
-
Field corrosion characterization of soil corrosion of X70 pipeline steel in a red clay soil
Abstract The corrosion behavior of X70 pipeline steel buried in red soil environment has been studied. The surface morphology and elemental distribution were determined by scanning electron microscopy (SEM),energy dispersive X-ray spectroscopy...
2015 / Shengrong Wang, Cuiwei Du, Xiaogang Li, Zhiyong Liu, Min Zhu, et al. -
Drilling of Inconel 718 with Geometry-modified Twist Drills
Abstract The drilling process of Inconel 718, a nickel-based superalloy, is very challenging due to the material properties, the operat- ing conditions and the high quality requirements. Carbides within the material matrix cause an excessive amount...
2014 / Nicolas Beer, Ekrem Özkaya, Dirk Biermann -
Evaluation of Flexographic Printing Technology for Multi-busbar Solar Cells
Abstract Rotational flexographic printing is a promising high-throughput technology for the front side metallization of silicon solar cells. Very low silver consumption and the possibility to realize narrow contact fingers make this technology...
2015 / A. Lorenz, A. Senne, J. Rohde, S. Kroh, M. Wittenberg, et al.