Materials engineering topic list of research papers
-
Cell Phone Mobility Classification based on k-Clustering and Linear Classification
Abstract Road traffic data is an essential element of the intelligent transportation system. However, available traffic data is insufficient to meet the current needs due to the high investment of infrastructure and traffic sensors. Therefore,...
2013 / Hua Wang, Shen Zhang, Xin Liu, Wei Quan -
Numerical Analysis of Effect of Friction on Mechanical Properties of Ti-6Al-4VAlloy Through Nanoindentation
Abstract Nanoindentation is a non-destructive technique used for evaluating mechanical properties from a very small volume of material by deforming it with a indenter. In the present investigation, FE modelling has been carried out to study the...
2013 / B. SridharBabu, A. Kumaraswamy, B. AnjaneyaPrasad -
Role and implications of nanodiagnostics in the changing trends of clinical diagnosis
Abstract Nanodiagnostics is the term used for the application of nanobiotechnology in molecular diagnosis, which is important for developing personalized cancer therapy. It is usually based on pharmacogenetics, pharmacogenomics, and...
2013 / Khalid Khalaf Alharbi, Yazeed A. Al-sheikh -
Entropic Forces in the Mechanics of Solids
Abstract The molecules that comprise biological structures are joined together by chemical bonds that are relatively weak com- pared to the ionic, covalent and metallic atomic bonds of traditional engineering materials. Both the large size of these...
2014 / L.B. Freund -
The Improved Transient Stabilities of HTS Coils by Removing the Insulation and Inserting the Metal Tapes
Abstract NMR/MRI magnets have a protection device to prevent the damages due to a quench. On the other hand, the protection device design of HTS coils or magnets are very difficult because it has a very low normal zone propagation velocity (NZPV)...
2013 / S.B. Kim, H. Kajikawa, H. Ikoma, J.H. Joo, J.M. Jo, et al. -
Modification performance on 4032 Al alloy by using Al–10Sr master alloys manufactured from different processes
Abstract The microstructures and modification performance on 4032 aluminum alloy of the Al–10Sr master alloy wire prepared from “direct reaction-hot extrusion” and the trapezoidal block from “direct reaction” were systemically studied by using...
2014 / Chengwei Liao, Jianchun Chen, Yunlong Li, Huan Chen, Chunxu Pan -
Study to Determinate the Feasibility of RFID to Facilitate Traceability in a Logistics Operator
Abstract In this paper we present the pilot project on the implementation of an RFID system in the facilities of Carreras Logistics Group, located at PLAZA. The main idea of this research was to determine the accuracy of the measurements obtained in ...
2013 / Jesús Royo, Pilar Lambán, Javier Valencia, Melisa Olivera, Mario Monsreal -
In vitro bioactivity of 3D Ti-mesh with bioceramic coatings in simulated body fluid
Abstract 3D Ti-mesh has been coated with bioceramics under different coating conditions, such as material compositions and micro-porosity, using a dip casting method. Hydroxyapatite (HA), micro-HA particles (HAp), a bioglass (BG) and their different ...
2014 / Wei Yi, Xudong Sun, Dun Niu, Xiaozhi Hu -
Thermodynamic Description of Fe−Y and Fe−Ni−Y Systems
Abstract The Fe−Y and the Fe−Ni−Y systems were assessed by means of the CALPHAD (CALculation of PHAse Diagram) technique. The solution phases, liquid, bcc, fcc and hcp, were described by the substitutional solution model. The binary compounds,...
2014 / Dongxian Lü, Cuiping Guo, Changrong Li, Zhenmin Du -
A Methodology for Ranking Road Safety Hazardous Locations Using Analytical Hierarchy Process
Abstract This study presents a methodology for ranking road safety hazardous locations using analytical hierarchy process (AHP). Road accident causes huge losses to the economy in terms of the cost incurred in hospitalization and treatment and...
2013 / Pradeep Kumar Agarwal, Premit Kumar Patil, Rakesh Mehar -
A new gene in A. rubens: A sea star Ig kappa gene
Abstract The sea star Asterias rubens reacts specifically to the antigen:HRP (horse-radish peroxydase) and produces an antibody anti-HRP. We previously identified a candidate Ig kappa gene corresponding to this manuscript. We show now the gene...
2014 / Nadine Vincent, Magne Osteras, Patricia Otten, Michel Leclerc -
Developing a Learning Factory to Increase Resource Efficiency in Composite Manufacturing Processes
Abstract Learning factories serve as platforms to ensure research findings are disseminated into industrial practice. A critical success factor for an effective technology transfer via a platform is the definition of a representative process chain....
2015 / Johannes Böhner, Max Weeber, Frank Kuebler, Rolf Steinhilper -
Effects of AC Dielectric Barrier Discharge Plasma Actuator Location on Flow Separation and Airfoil Performance
Abstract The goal of this work is to characterize the effect of Dielectric Barrier Discharge (DBD) plasma actuator on the lift and drag coefficients generated by the flow around a NACA 4415 airfoil model using force-balance and Particle Image...
2014 / Y. Bouremel, J.M. Li, Z. Zhao, M. Debiasi -
A Study on Machining Capability of a 2-DoF PKM-based Milling Machine
Abstract In the recent past, Parallel Kinematic Machines (PKM) with fixed-length legs have been claimed for their potential use as machine tools due to smaller moving masses leading to the high dynamic characteristics and accuracy. In this paper,...
2013 / Sanjay Darvekar, A.B. Koteswara Rao, K. Ramji -
Characterization of Al2O3 Thin Films Prepared by Thermal ALD
Abstract Thermal Atomic Layer Deposition was used to deposit Al2O3 layers with thickness ranging from 2 to 100nm for surface passivation of silicon solar cells. Various characterization techniques were used to evaluate the chemical, physical and...
2015 / Corina Barbos, Danièle Blanc-Pelissier, Alain Fave, Elisabeth Blanquet, Alexandre Crisci, et al. -
Alloying and Processing Effects on the Aqueous Corrosion Behavior of High-Entropy Alloys2014 / Zhi Tang, Lu Huang, Wei He, Peter Liaw
-
Ionic electroactive polymer artificial muscles in space applications2014 / Andres Punning, Kwang J. Kim, Viljar Palmre, Frédéric Vidal, Cédric Plesse, et al.
-
Integrating an e-book Software with Vector Graphic Technology on Cloud Platform
Abstract Many e-book applications have been available on the mobile devices in the recent decade. People read the electronic contents on their mobile devices. Meanwhile, a variety of mobile device platforms have emerged in the market. To make the...
2015 / Tseng-Yi Chen, Hsin-Wen Wei, Yu-Chun Cheng, Jenq-Shiou Leu, Wei-Kuan Shih, et al. -
Acoustic Emission Source Location Using a Distributed Feedback Fiber Laser Rosette2013 / Wenzhu Huang, Wentao Zhang, Fang Li
-
Optical Sensing of the Fatigue Damage State of CFRP under Realistic Aeronautical Load Sequences2015 / Pablo Zuluaga-Ramírez, Álvaro Arconada, Malte Frövel, Tomás Belenguer, Félix Salazar