Materials engineering topic list of research papers
-
A study of two-stage cumulative fatigue behavior for CNT/epoxy composites
Abstract In this study, the two-stage cumulative fatigue behavior for the carbon nanotube (CNT)/epoxy composites was experimentally investigated. The content of the chemically modified multi-walled carbon nanotubes used for the employed specimen is...
2010 / Yi-Ming Jen, Yu-Hsiang Yang -
Fatigue damage modelling of PEEK short fibre composites
Abstract In the present research the fatigue damage evolution of a PEEK based composite was studied. Examined material consisted of a PEEK matrix reinforced by carbon micro-fibres with addition of fillers such as graphite and PTFE. Fatigue tests in...
2011 / A. Avanzini, G.Donzella, D. Gallina -
The Langmuir-Blodgett Technique as a Tool for Homeotropic Alignment of Fluorinated Liquid Crystals Mixed with Arachidic Acid2011 / Anna Modlińska, Danuta Bauman
-
Enhanced Noise Shaping based Band-Pass Cross-Coupled ΣΔ Modulators for Advanced Wireless Transceivers
Abstract A band pass ΣΔ modulator using three different noise shaping based cross coupling techniques is proposed here. The effective use of time interleaving technique along with noise cross-coupling improves the performance of the modulator. Three ...
2015 / V. Paul Ansel, A.V. Jos Prakash, Babita R. Jose, Jimson Mathew -
Development of Hydrogels and Biomimetic Regulators as Tissue Engineering Scaffolds2012 / Junbin Shi, Malcolm M. Q. Xing, Wen Zhong
-
Interlaminar Fracture of Commingled GF/PET Composite Laminates2011 / N. Svensson, R. Shishoo, M. Gilchrist
-
Formation of Multilayer Claddings using High-power Fiber Laser Radiation
Abstract Fabricated and investigated samples of multilayer cladding on the flat surface are obtained using a laser cladding technology. Iron-based powder was used in the study. Geometric parameters of track depending on the process parameters were...
2015 / D.P. Bykovskiy, V.N. Petrovskiy, M.A. Murzakov, V.D. Mironov, P.S. Dzhumaev, et al. -
MiRNA-Directed Regulation of VEGF and Other Angiogenic Factors under Hypoxia2006 / Zhong Hua, Qing Lv, Wenbin Ye, Burton B. Yang, Yaou Zhang, et al.
-
Rapid prototyping by heat diffusion of metal foil and related mechanical testing2015 / Javaid Butt, Habtom Mebrahtu, Hassan Shirvani
-
Magnetostriction in Ar/sup +/ implanted and annealed Co/Pd multilayers2002 / A.D.C. Viegas, L.F. Schelp, J.E. Schmidt
-
Extraction Factor Of Tungsten Sources From Tungsten Scraps By Zinc Decomposition Process2015 / J.-H. Pee, G.H. Kim, H.Y. Lee, Y.J. Kim
-
Characterization of a New Aluminium Alloy for the Production of Wheels by Hybrid Aluminium Forging
Abstract Recently, an innovative technique called Hybrid Aluminium Forging (HAF) has been developed as a combination of casting and forging processes. In the present paper the characterization of a new Al-Si-Mg alloy with Cr addition is reported; it ...
2015 / M. Tocci, A. Pola, G.M. La Vecchia, M. Modigell -
The Role of Environmental Metrics (GWP, TEWI, LCCP) in the Selection Of Low GWP Refrigerant
Abstract Based on increasing contribution of refrigeration systems to climate change it is necessary to use environmentally friendly refrigerants to mitigate the global warming. Different environmental metrics are used to facilitate decision-making...
2015 / Pavel Makhnatch, Rahmatollah Khodabandeh -
Development of Hot Forming Process Under Inert Gas to Produce Magnesium Component Using High Degrees of Deformation for Industrial Applications
Abstract Production of magnesium components, using high degree of deformation forming process is difficult to achieve without defects, because of low formability of magnesium alloys at room temperature, an approach to a solution was established for...
2015 / K. Alaluss, G. Bürkner, O. Nuss -
The Effect of Evolving Damage on the Finite Strain Response of Inelastic and Viscoelastic Composites2009 / Jacob Aboudi
-
Mg-Zn-Al Eutectic Alloys as Phase Change Material for Latent Heat Thermal Energy Storage
Abstract The aim of this study is to investigate high thermal conductivematerials such as metallic alloys for latent heat energy storage in CSP applications. For this purposes, two ternary eutectic alloys,Mg70Zn24.9Al5.1 and Zn85.8Al8.2Mg6, have...
2015 / E. Risueño, A. Faik, J. Rodríguez-Aseguinolaza, P. Blanco-Rodríguez, A. Gil, et al. -
Improvement of Fatigue Resistance of a Tool Steel by Surface Treatments
Abstract 30NiCrMoV12 quenched and tempered samples were coated with 4μm of CrN produced by cathodic arc deposition technique. Micro-blasting treatment was performed on the coated samples, after the deposition, to remove defects like droplets from...
2015 / C. Petrogalli, L. Montesano, A. Pola, M. Gelfi, A. Ghidini, et al. -
Arc Welding Procedures on Steels for Molds and Dies
Abstract This work aims to present a method to establish arc welding procedures on steels for molds and dies. The welding of AISI P20 steel was studied. Simple and multi-pass welding were undertaken using the Tungsten inert gas process, evaluating...
2015 / Sir-Alexci Suarez, Albert Miyer Suarez, Wilson Tafur Preciado -
Nano-sized Superlattice Clusters Created by Oxygen Ordering in Mechanically Alloyed Fe Alloys2015 / Yong-Jie Hu, Jing Li, Kristopher A. Darling, William Y. Wang, Brian K. VanLeeuwen, et al.
-
An overview of materials issues in resistive random access memory
Abstract Resistive random access memory (RRAM) is a very promising next generation non-volatile RAM, with quite significant advantages over the widely used silicon-based Flash memories. For RRAM, material with switchable resistance, working as the...
2015 / Linggang Zhu, Jian Zhou, Zhonglu Guo, Zhimei Sun