Materials engineering topic list of research papers
-
Experimental Investigation of Minimum Quantity Lubrication (MQL) as a Sustainable Cooling Technique
Abstract The use of mineral based cutting fluid in machining process induces negative effects especially to the environment, operator's health and the machining cost itself. In sustainable machining concept, the introduction of coolant techniques...
2015 / E.A. Rahim, M.R. Ibrahim, A.A. Rahim, S. Aziz, Z. Mohid -
Metallic attenuated total reflection infrared hollow fibers for robust optical transmission systems2014 / Chengbin Jing, Hong Guo, Zhigao Hu, Pingxiong Yang, Junhao Chu, et al.
-
The Evolution of Compatible Microstructures in Shape Memory Alloys
Abstract Shape memory alloys (SMAs) have been extensively used in sensors and actuators. Their behavior is dominated by the microstructures. Observations show that martensite twins usually form laminated patterns with interfaces that satisfy the...
2014 / Nien-Ti Tsou -
A three-dimensional polarization domain retrieval method from electron diffraction data
Abstract We present an algorithm for retrieving three-dimensional domains of picometer-scale shifts in atomic positions from electron diffraction data, and apply it to simulations of ferroelectric polarization in BaTiO3. Our algorithm successfully...
2015 / Robert S. Pennington, Christoph T. Koch -
H2FC SUPERGEN: An overview of the Hydrogen and Fuel Cell research across the UK
Abstract The United Kingdom has a vast scientific base across the entire Hydrogen and Fuel Cell research landscape, with a world class academic community coupled with significant industrial activity from both UK-based Hydrogen and Fuel Cell...
2015 / Chloe Stockford, Nigel Brandon, John Irvine, Tim Mays, Ian Metcalfe, et al. -
Properties of Electroless Nickel at Elevated Temperature-a Review
Abstract Electroless nickel (EN) deposits are classified as anefficient class of coatings used mainly to enhance the surface performance characteristics of a range of substrates. Electroless coating differs from conventional electrolytic coating on...
2014 / Sanjib Kundu, Suman Kalyan Das, Prasanta Sahoo -
Failure analysis of a helical compression spring for a heavy vehicle's suspension system
Abstract This paper analyzed why a compression coil spring fractured at the transition position from the bearing coil to the first active coil in service, while the nominal stress here should always be much less than that at the inside coil position ...
2014 / Youli Zhu, Yanli Wang, Yuanlin Huang -
Self-doped superconductors2014 / David Bradley
-
Accelerated exploration of multi-principal element alloys with solid solution phases2015 / O.N. Senkov, J.D. Miller, D.B. Miracle, C. Woodward
-
Failure Propagation Analysis of Aircraft Engine Systems Based on Complex Network
Abstract To find the failure propagation mechanism from the complex system of aircraft engine, this paper used the topological structure to describe the coupling relations, discussing the role of topological geometry method in the failure...
2014 / Xiaofeng Liu, Siqi An -
Enhancing Technologies of Stabilization of Mill Vibration by Mill Stabilizing Device in Hot Rolling
Abstract In hot rolling, the strips have been needed to be rolled harder and faster to obtain thinner and higher quality strips, such as high strength steel or dual phase type high strength steel and so on. As the strips move faster and are rolled...
2014 / Hideaki Furumoto, Shinya Kanemori, Kanji Hayashi, Akira Sako, Tadashi Hiura, et al. -
Effect of Short Glass Fibers on Mechanical Properties of Polyamide66 and Polypropylene (PA66/PP) Thermoplastic Blend Composites
Abstract Polymer and their composites find use in many engineering applications as alternate products for metal based ones. The fiber filled thermoplastic composites play a very important role in effective improvement of Mechanical properties. In...
2014 / B.V. Lingesh, B.M. Rudresh, B.N. Ravikumar -
4-Iodoanilinium perchlorate 18-crown-6 clathrate2011 / Yi Zhang, Min-Min Zhao
-
A multi-scale controlled tissue engineering scaffold prepared by 3D printing and NFES technology2014 / Feifei Yan, Yuanyuan Liu, Haiping Chen, Fuhua Zhang, Lulu Zheng, et al.
-
High performance flexible top-emitting warm-white organic light-emitting devices and chromaticity shift mechanism2014 / Hongying Shi, Lingling Deng, Shufen Chen, Ying Xu, Xiaofei Zhao, et al.
-
Mechanical and Tribological Properties of PMMA-Sea Shell based Biocomposite for Dental application
Abstract The material used for fabricating dentures should have good mechanical and tribological properties in order to withstand heavy forces inside the mouth. A study has been made to evaluate the hardness and tribological properties the Poly...
2014 / R. Karthick, P. Sirisha, M. Ravi Sankar -
Nonlinear optical imaging of defects in cubic silicon carbide epilayers2014 / Radu Hristu, Stefan G. Stanciu, Denis E. Tranca, Alecs Matei, George A. Stanciu
-
A Review on Green Manufacturing: It's Important, Methodology and its Application
Abstract The paper gives the survey of green manufacturing, what is green manufacturing why it is needed and methods of green manufacturing that reduces the waste and even pollution. The paper focus on the green design for environment of green...
2014 / I.D. Paul, G.P. Bhole, J.R. Chaudhari -
Laser Microdrilling of Thermal Barrier Coatings
Abstract Parametric study of laser microdrilling of Ytrria stabilized Zirconia coated titanium plates employing 12kW CO2 laser was conducted in order to investigate the influence of laser power, frequency and assist gas pressure on quality...
2014 / A. Bharatish, H.N. Narasimha Murthy, B. Anand, B.S. Satyanarayana, S. Nagaraja, et al. -
Process Parameter with High Expansion Rate of SUS304 Tube Hydroforming
Abstract Stainless steel has been applied more and more extensively because it has good corrosion resistance and its surface is glossy, like a mirror after polishing. Thus, it is used in high-price pieces or quality goods. In this paper, the SUS 304 ...
2014 / Yi-Chun Chen, Chih-Yu Chuang, Ming-Fu Lee