Materials engineering topic list of research papers
-
Characterisation of the Thermal Damage in a Martensitic Steel Substrate Consequent to Laser Cladding Process
Abstract The paper deals with the study of the thermal damage of the substrate during the laser cladding process. The laser cladding process is known as a process which causes small thermal damage in the base material situated directly below the...
2011 / B. Valsecchi, B. Previtali, E. Gariboldi, A. Liu -
Flexural Test On Recycled Polystyrene
Abstract In socio-environmental scenario increased the nature resources concern beyond products and subproducts reuse. Recycling is the approach for a material or energy reintroducing in productive system. This method allows the reduction of garbage ...
2011 / P.N.S. Schmidt, M.O.H. Cioffi, H.J.C. Voorwald, J.L. Silveira -
The bearing strength of pin loaded woven composites manufactured by vacuum assisted resin transfer moulding and hand lay-up techniques
Abstract The bearing strength of pin loaded woven glass-fiber reinforced epoxy composites was investigated. To understand the effect of manufacturing methods on bearing strength of pin loaded composites, specimens manufactured using Vacuum Assisted...
2011 / Ercan Sevkat, Malek Brahimi -
Fatigue Behavior of Electrodeposited Nanocrystalline Nickel Films
Abstract Material characterization of thin film for MEMS/nano structures is a building block for the reliability assessment. One of the most significant barriers for reliable MEMS/nano structure is the long term reliability which is different from...
2011 / Dong-Cheon Baek, Soon-Bok Lee -
Influence of water absorption on creep behaviour of carbon fiber/epoxy laminates
Abstract The mechanical properties of polymer composites are changed in various environmental factor such as humid condition, low and high temperatures, water vapor and long-term physical chemical stability. Carbon fiber/epoxy laminates are...
2011 / Hyojin Kim, Kenichi Takemura -
Optofluidic microsystem for on-chip L2-waveguide modulation featuring flow stabilization and a novel input coupling region
Abstract We present an optofluidic microsystem integrated onto a single device featuring on-chip light guiding and positioning under stable and low-loss conditions. Integration of optical components onto a microfluidic chip offers numerous new...
2010 / Emanuel Weber, Michael Rosenauer, Peter D.E.M. Verhaert, Michael J. Vellekoop -
Constitutive behavior of injection molded short glass fiber reinforced thermoplastics: a phenomenological approach
Abstract SGFR thermoplastics exhibit a highly non-linear mechanical behavior under complex mechanical loadings, for various temperature and humidity conditions. A phenomenological constitutive model is proposed, describing several physical...
2011 / A. Launay, Y. Marco, M.H. Maitournam, I. Raoul -
Fatigue analysis of threaded connections using the local strain approach
Abstract The fatigue assessment of bolts and bolted joints is done using nominal approach, for example the German VDI guideline 2230 . For threaded components, the nominal approach and therefore the guideline is no more applicable. The calculation...
2010 / R. Schneider, U. Wuttke, C. Berger -
Change Stability Configurations to Endothelial Cells
Abstract Integrins are heterodimers, of α and β units, which possess a large extracellular domain responsible for ligand binding. These link types can undergo drive changes in their molecular structure through mechanical force by blood flow. So, a...
2011 / Michele Buonsanti, Antonella Pontari -
Prediction of the Mechanical Properties of PE/PP Blends Using Artificial Neural Networks
Abstract Polymers have been widely used in industrial applications due to their good thermal and electrical insulation properties, low density and high resistance to chemicals, but they are mechanically weaker and exhibit lower strength and...
2011 / Basem F. Yousef, Abdel-Hamid I. Mourad, Ali Hilal-Alnaqbi -
Growth and retardation of physically short fatigue cracks in an aircraft Al-alloy after shot peening
Abstract The paper contains results of an investigation of an effect of shot peening on initiation and growth of physically short fatigue cracks in an aircraft V-95 Al-alloy, which is of a similar type as 7075 alloy. The first part deals with an...
2011 / Ivo Černý -
Work and Workout - How to Introduce Healthy Workload at Workplaces
Abstract While Applied Ergonomics practitioners are still working on the reduction of physical workload for the sake of the workforce Sports Science and other Life Sciences found that our problem is in contrast a sedentary lifestyle, which...
2015 / Manfred Dangelmaier, Wilhelm Bauer, Christian Vocke, Vivien Melcher -
Behavior of W-based materials in hot helium gas
Abstract Materials for the plasma facing components of future fusion reactors will be subjected to complex loading and various forms of interaction with low Z species (hydrogen isotopes and helium). The divertor components will be among the most...
2016 / J. Matějíček, M. Vilémová, H. Hadraba, F. Di Gabriele, I. Kuběna, et al. -
Acknowledgments2004 /
-
Trends in Overweight and Obesity among Children and Adolescents in China from 1981 to 2010: A Meta-Analysis2012 / Zhangbin Yu, Shuping Han, Jiahui Chu, Zhongya Xu, Chun Zhu, et al.
-
Improvement of Mechanical Properties of Noil Hemp Fiber Reinforced Polypropylene Composites by Resin Modification and Fiber Treatment2013 / Zili Yan, Jianchun Zhang, Hua Zhang, Hao Wang
-
Generalized Hamilton’s Principle for Inelastic Bodies Within Non-Equilibrium Thermodynamics2011 / Kuang-Dai Leng, Qiang Yang
-
Hydrogen Production from Semiconductor-based Photocatalysis via Water Splitting2012 / Chi-Hung Liao, Chao-Wei Huang, Jeffrey C. S. Wu
-
BioShape: a spatial shape-based scale-independent simulation environment for biological systems
Abstract The simulation and visualization of biological system models is becoming more and more important both in clinical use and in basic research. Since many systems are characterized by interactions involving different scales at the same time,...
2010 / F. Buti, D. Cacciagrano, F. Corradini, E. Merelli, L. Tesei -
Microstructure of Laser Re-Melted AlCoCrCuFeNi High Entropy Alloy Coatings Produced by Plasma Spraying2013 / Tai Yue, Hui Xie, Xin Lin, Haiou Yang, Guanghui Meng