Materials engineering topic list of research papers
-
Machinability Study on Dry Drilling of Titanium Alloy Ti-6Al-4V using L9 Orthoganal Array
Abstract In modern manufacturing technology, a lot of extensive research work has been carried out in drilling operations for achieving better hole quality. Drilling is one such machining processes which is widely used in aeronautical and automotive ...
2014 / Pradeep Kumar Shetty, Raviraj Shetty, Divakara Shetty, N. Fazalul Rehaman, Tony K. Jose -
Implementation of half adder and half subtractor with a simple and universal DNA-based platform2013 / Shanling Xu, Hailong Li, Yuqing Miao, Yaqing Liu, Erkang Wang
-
Intelligent Composite Layup by the Application of Low Cost Tracking and Projection Technologies
Abstract Hand layup is still the dominant forming process for the creation of the widest range of complex geometry and mixed material composite parts. However, this process is still poorly understood and informed, limiting productivity. This paper...
2014 / Matthew Such, Carwyn Ward, Windo Hutabarat, Ashutosh Tiwari -
Facilitating Meta-learning in Pre-service Teachers: Using Integration and Slowmation Animation
Abstract Meta-learning relates to one's ability to have an awareness of one's self as a learner, and being able to use this ability to become a more effective learner. It is important for pre-service teachers to develop this self-awareness about...
2015 / Gillian Kidman -
Thermal protection mechanism of heat pipe in leading edge under hypersonic conditions
This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of Authors and agreed by the Editors. A similar...
2014 / Wengen Peng, Yurong He, Xinzhi Wang, Jiaqi Zhu, Jiecai Han -
Enabling an Integrated Rate-temporal Learning Scheme on Memristor2014 / Wei He, Kejie Huang, Ning Ning, Kiruthika Ramanathan, Guoqi Li, et al.
-
Effect and Optimization of Machine Process Parameters on MRR for EN19 & EN41 Materials Using Taguchi
Abstract The present work deals with the comparison of the MRR for EN19 and EN41 material in a die sinking EDM machine. The various input factors like Pulse ON time, Pulse OFF time, Discharge current and voltage were considered as the input...
2014 / Vikas, Shashikant, A.K. Roy, Kaushik Kumar -
Three-dimensional (3D) Fast Neutron Tomography at the Low Energy Neutron Source (LENS)
Abstract We have constructed a neutron imaging station at the Low Energy Neutron Source (LENS), located within the Center for the Exploration of Energy and Matter at Indiana University. In contrast to many existing neutron imaging stations, we...
2014 / S. Lee, T. Rinckel, J. Doskow, P.E. Sokol -
Disease-triggered hydrogel therapy2014 / Xin Zhao, Wenguo Cui
-
Modeling of the Heat Interface of a Plasma Actuator
Abstract We simulated a one-dimensional plasma actuator (PA) with a dielectric layer by using the electric potential equation, the electron and ion density conservation equations, and the enthalpy equation. We then derived the correlation of...
2015 / Yasuo Obikane, Khemedekh Lochin -
A convenient way to represent fatigue crack growth in structural adhesives2014 / R. Jones, W. Hu, A. J. Kinloch
-
Analysis of Single-degree-of-freedom Systems Containing Multi-functional Friction Damper
Abstract Friction dampers are one type of energy dissipation devices that are able to forms an efficient seismic protection system for seismic structures. Nevertheless, traditional friction dampers can only be designed under a target earthquake of a ...
2014 / Chia-Shang Chang Chien, Lyan-Ywan Lu, Yu-Lin Tsai -
Finite Element Modeling of Shear Strain in Asymmetric and Symmetric Rolling in Multi Roll Calibers
Abstract Methods of severe plastic deformation are used in the production of profiles for automobile, aircraft and chemical industry, medical implants, etc. However these methods have some shortcomings (low manufacturability, small size of produced...
2014 / Alexander Pesin, Mikhail Chukin, Aleksey Korchunov, Denis Pustovoytov -
Laser Cladding of TiAl Intermetallic Alloy on Ti6Al4V -Process Optimization and Properties
Abstract In order to improve Ti6Al4V high-temperature resistance and its tribological properties, the deposition of TiAl intermetallic (Ti-48Al-2Cr-2Nb) coating on a Ti6Al4V substrate by coaxial laser cladding has been investigated. Laser cladding...
2014 / B. Cárcel, A. Serrano, J. Zambrano, V. Amigó, A.C. Cárcel -
Analysis for Fatigue Failure Causes on a Large-scale Reciprocating Compressor Vibration by Torsional Vibration
Abstract The crankshaft of a large-scale reciprocating compressor frequently cracks because of the fatigue failure and the 1st and 2nd crank bearings often are scuffed due to torsional vibration. Such problems are handled by connecting the 2nd and...
2014 / Jing Zhao, Shijie Wang -
Combined CBD-CVD Technique for Preparation of II-VI Semiconductor Films for Solar Cells
Abstract II-VI and IV-VI semiconductor films for solar cell applications, namely, CdTe, CdSe, PbSe and PbTe, can be prepared in two-stage deposition process. In this work we illustrate the two-stage process to obtain PbTe films from precursor...
2014 / I.R. Chávez Urbiola, J.A. Bernal Martínez, J. Hernández Borja, C.E. Pérez García, R. Ramírez Bon, et al. -
Deep Drawing of Cylindrical Cup Using Incremental Electromagnetic Assisted Stamping with Radial Magnetic Pressure
Abstract A new forming method named incremental electromagnetic assisted stamping with radial magnetic pressure is proposed to draw a deep cylindrical cup. The method combines with traditional stamping, electromagnetic sheet forming and...
2014 / Xiaohui Cui, Jianhua Mo, Jinxiu Fang, Jianjun Li -
Effect of Process Parameters on Tool Wear and Surface Roughness during Turning of Hardened Steel with Coated Ceramic Tool
Abstract Tool wear and surface roughness prediction plays a significant role in machining industry for proper planning and control of machining parameters and optimization of cutting conditions. This paper deals with developing a response surface...
2014 / R. Suresh, S. Basavarajappa -
Does the Dirac Cone Exist in Silicene on Metal Substrates?2014 / Ruge Quhe, Yakun Yuan, Jiaxin Zheng, Yangyang Wang, Zeyuan Ni, et al.
-
Improving the Accuracy of Crack Length Measurement Using Machine Vision
Abstract In the current paper a new method is introduced to analyze and measure the cracks dimensions in solid materials such as mechanical tools and bricks. Since the cracks do not have a regular or predictable shape, in order to achieve the exact...
2015 / K. Khalili, M. Vahidnia