Materials engineering topic list of research papers
-
L-strip proximity fed gap coupled compact semi-circular disk patch antenna
Abstract In this article, the analysis of dualband L-strip fed compact semi-circular disk microstrip patch antenna has been presented using circuit theory concept. The antenna parameters such as return loss, VSWR and radiation pattern are...
2014 / Ashish Singh, J.A. Ansari, Kamakshi, Mohammad Aneesh, Saiyed Salim Sayeed -
Microstructural percolation assisted breakthrough of trade-off between strength and ductility in CuZr-based metallic glass composites2014 / Z. Q. Liu, G. Liu, R. T. Qu, Z. F. Zhang, S. J. Wu, et al.
-
Co and In Doped Ni-Mn-Ga Magnetic Shape Memory Alloys: A Thorough Structural, Magnetic and Magnetocaloric Study2014 / Simone Fabbrici, Giacomo Porcari, Francesco Cugini, Massimo Solzi, Jiri Kamarad, et al.
-
Structural Dynamics of GaN Microcrystals in Evolutionary Selection Selective Area Growth probed by X-ray Microdiffraction2014 / V. Kachkanov, B. Leung, J. Song, Y. Zhang, M.-C. Tsai, et al.
-
Modelling and analysis of material removal rate and surface roughness in wire-cut EDM of armour materials
Abstract The current work presents a comparative study of wire electrical discharge machining (WEDM) of armour materials such as aluminium alloy 7017 and rolled homogeneous armour (RHA) steel using buckingham pi theorem to model the input variables...
2015 / Ravindranadh Bobbili, V. Madhu, A.K. Gogia -
Synthesis of Monodispersed SnO2 Microspheres via Solvothermal Method
Abstract Monodispersed SnO2 microspheres with diameter about 1μm were successfully synthesized by solvothermal method at 180 OC for 12h, using PEG as template, SnCl4•5H2O and urea as raw materials. Effects of concentration and molecular weight of...
2014 / Xiuqing Qiao, Hui Yang, Cheng Chen, Xianghong Lou, Jiyang Sun, et al. -
Transient Simulation of High Temperature High Pressure Solar Tower Receiver
Abstract A solar receiver undergoes frequent transients events and the nature of these transient events is very different from conventional thermal power plants. The SRSG (Solar Receiver Steam Generator) operates during the day when heat from the...
2015 / R. Terdalkar, D. Doupis, M. Clark, A. Joshi, C. Wang -
Toward a New Generation of Photonic Humidity Sensors2014 / Stanislav Kolpakov, Neil Gordon, Chengbo Mou, Kaiming Zhou
-
Nanostructured Surfaces: Bioinspiration for Transparency, Coloration and Wettability
Abstract Natural nanostructures rarely come with a single biological function to fulfil. Moreover, from a bio-inspiration perspective, it sounds attractive to develop multifunctional coatings, devices or sensors. Suppression of light reflection from ...
2014 / O. Deparis, S. Mouchet, L. Dellieu, J.-F. Colomer, M. Sarrazin -
Finite-difference Time-domain Modeling of Laser-induced Periodic Surface Structures
Abstract Laser-induced periodic surface structures (LIPSSs) consist of regular wavy surface structures with amplitudes the (sub)micrometer range and periodicities in the (sub)wavelength range. It is thought that periodically modulated absorbed laser ...
2014 / G.R.B.E. Römer, J.Z.P. Skolski, J. Vincenc Oboňa, A.J. Huis in’t Veld -
Analysis and an overview of fixators in medicine and the methods of processing materials for producing fixators2013 / Djenadic Dalibor, Tanikic Dejan, Manic Miodrag, Randjelovic Sasa, Djekic Petar
-
A biopolymer-like metal enabled hybrid material with exceptional mechanical prowess2015 / Junsong Zhang, Lishan Cui, Daqiang Jiang, Yinong Liu, Shijie Hao, et al.
-
High-speed video analysis for kink formation in a bond wire looping2014 / Lei Han
-
A Criterion for Topological Close-Packed Phase Formation in High Entropy Alloys2015 / Yiping Lu, Yong Dong, Li Jiang, Tongmin Wang, Tingju Li, et al.
-
AIMS – A Metal Additive-hybrid Manufacturing System: System Architecture and Attributes
Abstract This paper presents an integrated hybrid manufacturing approach to enhance and accelerate the adoption of metal Additive Manufacturing (AM) by adding a direct digital subtractive process to the production that is capable of improving the...
2015 / Guha Manogharan, Richard Wysk, Ola Harrysson, Ronald Aman -
Finite Element Simulation of Multi-gripper Flexible Stretch Forming
Abstract Multi-gripper flexible stretch forming is a novel sheet metal forming process aimed at improving the conformability of sheet metal to forming die, material utilization and forming quality of sheet metal. Straight jaws in traditional stretch ...
2014 / You Wang, Mingzhe Li, Hongwei Liu, Jian Xing -
Graphene–protein field effect biosensors: glucose sensing
Chronic diseases are becoming more prevalent, and the complexities of managing patients continue to escalate, since their care must be balanced between the home and clinical settings. Diabetes is the most advanced example, where self-monitoring has been shown to...
2015 / Sowmya Viswanathan, Tharangattu N. Narayanan, Kiana Aran, Kathryn D. Fink, Jacobo Paredes, et al. -
A widely adaptable approach to generate integration-free iPSCs from non-invasively acquired human somatic cells2014 / Zhichao Ding, Lina Sui, Ruotong Ren, Yanjun Liu, Xiuling Xu, et al.
-
Performance Evaluation of Lubricant for Producing Smooth Surface Product in Cold Extrusion of Aluminum Using Tool with Micro-groove Arrays
Abstract The effects of lubricating oil on surface quality of the extruded aluminum product were investigated by carrying out a series of plane strain cold extrusion experiments. The forming dies of extrusion apparatus were assembled with a...
2014 / Shunpei Kamitani, Kenji Nakanishi, Yong-Ming Guo -
Identification of Potential Sites for Detention Ponds along the Vrishabhavathi River
Abstract Vrishabhavathi Watershed is a constituent of the Arkavathi River Basin, Bangalore Urban and Ramanagara District and covers an area of 360.620Km2, representing seasonally dry tropical climate. In Vrishabhavathi watershed Vrishabhavathi River ...
2015 / P.T. Aravinda, H.B. Balakrishna, K.C. Jayaramu