Materials engineering topic list of research papers
-
Cyberinfrastructure for Joint Research in Qinghai Lake Nature Reserve
Abstract This paper introduces the Cyberinfrastructure and e-Science application of joint research in the Qinghai Lake National Nature Reserve, supporting cross-disciplinary, cross-organizational and international collaborative research. We...
2011 / Luo Ze, Zhou Yuanchun, Li Jian, Shao Jing, Yang Tao, et al. -
Highly Integrated Piezo-Hydraulic Feed Axis
Abstract Currently used micro-machines are mostly based on macro machine tool principles. This leads to an unfavorable ratio of build and work space and also to high moving masses in comparison to the workpiece mass. To address these disadvantages...
2012 / J. Fleischer, J. Bauer -
Analysis of the natural activities of radionuclides, heavy metals, and other poisonous elements in lead-free Sn–6.5Zn solders with different alloying elements
Abstract Problem statement Sn–Zn solders are candidate alternatives to Sn–Pb-based solder alloys. With the increasing requirement for lead-free solders, the reliability of successor solders in microelectronics assemblies is in high ...
2015 / Nassief A. Mansour, Abdallah F. Saad, Abd El-Rahman A. El-Daly, Safwat Salama, Hassan Hashem, et al. -
Preparation and morphology of single crystal (-Al2O3 nano- particles by combustion chemical deposition
Abstract The single crystal (-Al2O3 nano-powder was prepared by combustion chemical deposition. The crystal growth process was observed with TEM and SEM. The optimum technological condition was determined. The results showed that most of (-Al2O3...
2012 / Zengzhi Zhang, Shuang Zhou, Zhichun Chen -
Prediction and Measurement of Pressure Distribution Over a Compressor Blade Through A Cascade Studies
Abstract The base of this paper is to find the pressure distribution over the compressor blades through a cascade, which is useful to measure the flow properties of the compressor in an actual axial compressor. The static pressure distribution is...
2012 / K. Sathiyalingam, C.J. Thomas Renald, R. Manikandan, R. Sivakumar, T. Arun Kumar, et al. -
Cement Loop Damage-based Fracture Mechanism during Repair of Casing Failure Well
Abstract Casing failure is a common problem in oilfield. This paper studies on cement loop damage during the repair of casing failure well based on the theories of composite materials mechanics, interface mechanics and damage mechanics, and a...
2012 / Niu Jingtai, Peng Youwen, Wu Congcong, Wei Bowen -
Simulation and analysis of underground power cables faults
Abstract The experience in operation of electrical equipment has shown that partial discharges shorten the life insulation systems. Therefore, the partial discharge can become the cause of serious economic losses by requiring repairs and early...
2012 / M. Fonseca_Badillo, L. Negrete_Navarrete, A. González_Parada, A. Castañeda_Miranda -
Dynamic Optimization and Robust Control of Batch Crystallization
Abstract Crystallization is used to produce vast quantities of materials. Batch crystallization is widely practiced for high-value products. Batch crystallizers are desired to operate at an optimal trajectory to produce a desired product quality and ...
2012 / V. Gamez-Garci, H.F. Flores-Mejia, J. Ramirez-Muñz, H. Puebla -
A Diversity Antenna for MIMO Application
Abstract The Multiple-input Multiple-output (MIMO) antenna system is a vital study in today's Wireless communication system especially when the signal propagates through some corrupted environments. In our paper a new approach of a MIMO antenna is...
2012 / Chandan Kumar Ghosh, Biswarup Rana, Arabinda Roy, Susanta Kumar Parui -
Water Supply Network Sectorization Based on Social Networks Community Detection Algorithms
Abstract Sectorization is a process aimed at efficiently managing Water Supply Networks (WSNs). There are many large WSNs where the number of sectors into which they might be subdivided is initially unknown. Our method uses concepts derived from the ...
2014 / E. Campbell, D. Ayala-Cabrera, J. Izquierdo, R. Pérez-García, M. Tavera -
Multipass Narrow Gap of Heavy Gauge Steel with Filler Wire
Abstract This article describes method of heavy gauge welding using laser radiation as beam source of energy. The article contains the results of single-pass laser-arc welding and multipass laser welding with filler wire; highlight benefits and...
2015 / Y. Markushov, N. Evtihiev, N. Grezev, M. Murzakov -
A Novel Polyimide – Platinum – SU-8 Microelectrode Array for Various Electrophysiological Applications
Abstract Precise and reproducible construction of microelectrode arrays (MEAs) is possible due to the advanced technology of microelectromechanical systems (MEMS). Polymer-based MEMS devices are gaining increasing attention in the field of...
2014 / Gergely Márton, Gábor Orbán, Marcell Kiss, Anita Pongrácz, István Ulbert -
A Service-oriented Framework for Integration of Domain-specific Data Models in Scientific Workflows
Abstract Managing data exchange in scientific workflow simulations is a challenge for which existing solutions have only limited success. Basing on a data-model approach we developed a service-oriented, platform- and language-independent framework...
2013 / Andreas Bender, Angela Poschlad, Stefan Bozic, Ivan Kondov -
Bayes Estimation of Traffic Intensity in M/M/1 Queue under a Precautionary Loss Function
Abstract Bayesian estimators of the traffic intensity in an M/M/1 queue are derived under a new weighted square error loss function. These Bayes estimators are obtained based on two different priors of the traffic intensity, and compared with the...
2012 / Haiping Ren, Guofu Wang -
Fabrication of Chelate-setting Cements from Hydroxyapatite Powders Surface-modified with Various Sodium Inositol Hexaphosphate Concentrations and their Mechanical Properties
Abstract The effect of concentration of sodium inositol hexaphosphate (IP6-Na) on material properties of calcium-phosphate cement (CPC) was investigated. The starting cement powder (IP6-HAp) was prepared by grinding and surface modifying...
2012 / Toshiisa Konishi, Minori Mizumoto, Michiyo Honda, Zhi Zhuang, Mamoru Aizawa -
Localization of leucocyte interferon gene in the q2.5 region of pig chromosomel by in situ hybridization2009 / M Yerle, J Gellin
-
In-situ localized carbon nanotube growth inside partially sealed enclosures2013 / Y. van de Burgt, A. Champion, Y. Bellouard
-
Hydrothermal synthesis of AlPO4-5: Effect of precursor gel preparation on the morphology of crystals
Abstract This paper reports on the effect of precursor gel preparation on the microstructural formation of aluminophosphate-5 (AlPO4-5) molecular sieves in the hydrothermal synthesis. The morphology of AlPO4-5 crystal changed from sphere to ellipse...
2013 / Dan Li, Jianfeng Yao, Huanting Wang -
Nanostructured LiMn2O4 and their composites as high-performance cathodes for lithium-ion batteries
Abstract Improvement of the energy density and power density of the lithium-ion batteries is urgently required with the rapid development of electric vehicles and portable electronic devices. The spinel LiMn2O4 is one of the most promising cathode...
2012 / Hui Xia, Zhentao Luo, Jianping Xie -
FRP Wrapping for RC Columns with Varying Corner Radii
Abstract Existing reinforced concrete (RC) columns may be structurally deficient due to variety of reasons such as improper transverse reinforcement, flaws in structural design, insufficient load carrying capacity, etc. Carbon/Glass fibre reinforced ...
2013 / Sushil S. Sharma, Urmil V. Dave, Himat Solanki