Electrical engineering, electronic engineering, information engineering topic list of research papers
-
Utilizing cable winding and industrial robots to facilitate the manufacturing of electric machines
Abstract Cable wound electric machines are used mainly for high voltage and direct-drive applications. They can be found in areas such as wind power, hydropower, wave power and high-voltage motors. Compared to conventional winding techniques, cable...
2012 / Erik Hultman, Mats Leijon -
Improved Control Strategy for DFIG Wind Turbines for Low Voltage Ride Through2013 / Zaijun Wu, Chanxia Zhu, Minqiang Hu
-
Energy Policy in Taiwan: Historical Developments, Current Status and Potential Improvements2009 / Yun-Hsun Huang, Jung-Hua Wu
-
Dynamic Resource Partitioning for Downlink Femto-to-Macro-Cell Interference Avoidance2010 / Zubin Bharucha, Andreas Saul, Gunther Auer, Harald Haas
-
Exploiting sensor redistribution for eliminating the energy hole problem in mobile sensor networks2012 / Jie Jia, Xueli Wu, Jian Chen, Xingwei Wang
-
Medium Access in Spread-Spectrum Ad Hoc Networks with Multiuser Detection2008 / Katsutoshi Kusume, Robert Vilzmann, Andreas Müller, Christian Hartmann, Gerhard Bauch
-
Consumer-centric resource accounting in the cloud2013 / Ahmed Mihoob, Carlos Molina-Jimenez, Santosh Shrivastava
-
Design of Nonuniform Filter Bank Transceivers for Frequency Selective Channels2006 / Han-Ting Chiang, See-May Phoong, Yuan-Pei Lin
-
Identifying Unstable Region of Operation in a Micro-grid System
Abstract This paper presents the stability analysis based on impedance representation of a single phase inverter operating as voltage source, where the Nyquist criteria can be applied. The method can be used to study the stability of a micro-grid...
2012 / Santiago Sanchez Acevedo, Marta Molinas -
Multimodal identification and localization of users in a smart environment2008 / Albert Ali Salah, Ramon Morros, Jordi Luque, Carlos Segura, Javier Hernando, et al.
-
Analysis of Integrated Project Effectiveness in the Implementation of Generic Skills
Abstract Department of Chemical and Process Engineering (JKKP), Universiti Kebangsaan Malaysia has taken an initiative to implement an Integrated Project (IP) for Year II and III since the 2006/2007 session. This project combines three or four...
2012 / Siti Rozaimah Sheikh Abdullah, Mohd Sobri Takriff, Manal Ismail, Mohd Sahaid Kalil, Wan Ramli Wan Daud, et al. -
Solving the chemical master equation using sliding windows2010 / Verena Wolf, Rushil Goel, Maria Mateescu, Thomas A Henzinger
-
Feasibility Study of 1 MW Standalone Hybrid Energy System: For Technical Institutes2012 / Pragya Nema, Sayan Dutta
-
FPGA based wireless sensor node with customizable event-driven architecture2013 / Junsong Liao, Brajendra K Singh, Mohammed AS Khalid, Kemal E Tepe
-
PCNN Model Automatic Linking Strength Determination Based on Geometric Moments in Image Fusion2014 / Zhibiao Shu
-
A Reconfigurable Architecture for Rotation Invariant Multi-View Face Detection Based on a Novel Two-Stage Boosting Method2009 / Jinbo Xu, Yong Dou, Zhengbin Pang
-
Rapid Industrial Prototyping and SoC Design of 3G/4G Wireless Systems Using an HLS Methodology2006 / Yuanbin Guo, Dennis McCain, Joseph R. Cavallaro, Andres Takach
-
Object Tracking in Crowded Video Scenes Based on the Undecimated Wavelet Features and Texture Analysis2008 / M Khansari, H R Rabiee, M Asadi, M Ghanbari
-
Combined optimization of electrical and mechanical parameters of in-plane and out-of-plane gap-closing electrostatic Vibration Energy Harvesters (VEHs)
Abstract This paper presents a simple analytical method to optimize the efficiency of two types of electrostatic Vibration Energy Harvesters (VEH): the out-of-plane (OPGC) and in-plane (IPGC) gap-closing converters. For the first time the electrical ...
2010 / Raphaël Guillemet, Philippe Basset, Dimitri Galayko, Tarik Bourouina -
A new type of intelligent wells Seal Plug Controller
Abstract The main content of this paper Introduces a microcomputer based on Atmega48 wells Seal plug controller, based on method of going through steel structure to transfer control of high pressure sealing orders, designing based on the 433 MHz...
2010 / Yingji Hao, Yuyu Hao, Yang Lu, Zhiling Jia