Electrical engineering, electronic engineering, information engineering topic list of research papers
-
A Soft Detector with Good Performance/Complexity Trade-Off for a MIMO System2004 / Jianhua Liu, Jian Li
-
3D Visual Odometry for Road Vehicles2007 / R. García-García, M. A. Sotelo, I. Parra, D. Fernández, J. E. Naranjo, et al.
-
Joint power and rate allocation in CDMA-based underlay cognitive radio networks for a mixture of streaming and elastic traffic2012 / Mina Dashti, Paeiz Azmi
-
Non-volatile memory reduction based on 1-D memory space mapping of a specific set of QC-LDPC codes2012 / Chung-Ping Young, Chung-Chu Chia, Chao-Chin Yang, Chung-Ming Huang
-
A generative-oriented model-driven design environment for customizable video surveillance systems2013 / Nuno Cardoso, Pedro Rodrigues, João Vale, Paulo Garcia, Paulo Cardoso, et al.
-
A distributed multi-robot adaptive sampling scheme for the estimation of the spatial distribution in widespread fields2012 / Muhammad F Mysorewala, Lahouari Cheded, Dan O Popa
-
Photovoltaic Module Modeling using Simulink/Matlab
Abstract This paper describes a method of modeling and simulation photovoltaic (PV) module that implemented in Simulink/Matlab. It is necessary to define a circuit-based simulation model for a PV cell in order to allow the interaction with a power...
2013 / Krismadinata, Nasrudin Abd. Rahim, Hew Wooi Ping, Jeyraj Selvaraj -
Low-order auditory Zernike moment: a novel approach for robust music identification in the compressed domain2013 / Wei Li, Chuan Xiao, Yaduo Liu
-
Research of Full Digit Single-phase Inversion Power Supply Based on DSP
Abstract With the increasing need of high quality power supply resulting from the use of electric appliances day by day, research on high-performance PWM inverter is gaining more and more attention. In order to improve the waveform quality of the...
2012 / Xuezhi Hu, Guangqun Nan -
Hybrid Control of the Single-Phase Induction Machine without Capacitor Using Artificial Intelligence Techniques
Abstract The hybrid controls are the controls combining several techniques. Their purpose is to benefit from performance of each of these techniques. The control proposed in this paper is based on this hybrid approach; combining the performances of...
2012 / Kenza Bouhoune, Krim Yazid, Mohamed Seghir Boucherit -
Ant Colony Optimization Applied to Control of Ocean Wave Energy Converters
Abstract Recently, various control models have been developed to optimize the performance of wave energy converters in order to enhance their long term economic value. Among others, the control of the all-electric Power Take Off (PTO) has been...
2012 / Phen Chiak See, Vin Cent Tai, Marta Molinas -
A Monitoring System Design in Transmission Lines based on Wireless Sensor Networks
Abstract A smart grid application in monitoring the condition of transmission line with wireless sensor networks was described in this paper. ZigBee and GPRS (General Packet Radio Service) technology were adopted in this system to ensure normal...
2011 / Yang Yang, Guangzhong Xie, Xiangdong Xu, Yadong Jiang -
Photovoltaic Based Dynamic Voltage Restorer with Outage Handling Capability Using PI Controller
Abstract In this paper, Photovoltaic (PV) based Dynamic Voltage Restorer (DVR) is proposed to handle deep voltage sags, swells and outages on a low voltage residential distribution system. The PV based DVR can recover sags up to 10%, swells up to...
2011 / M. Ramasamy, S. Thangavel -
Performance Verification of PID Controller in an Interconnected Power System Using Particle Swarm Optimization
Abstract There are many methods available for Load frequency control in an interconnected power system. This paper deals with tuning of PID controller for Load frequency control. A two area thermal power system is considered for study. Both the...
2012 / Ashok Mohan Jadhav, K. Vadirajacharya -
Time-Frequency Based Channel Estimation for High-Mobility OFDM Systems—Part II: Cooperative Relaying Case2010 / Erol Önen, Niyazi Odabaşioğlu, Aydın Akan
-
User scheduling for MU-MIMO transmission with active CSI feedback2015 / Kyu-haeng Lee, Chong-kwon Kim
-
Design of 2000kW switched reluctance machine system
Abstract The switched reluctance machine system with high reliability and fault tolerance capability has good perspective for large power applications. The machine, the topology of the power converter main circuit and the control strategy should be...
2009 / Chen Hao, Trifa V. -
A Proxy Architecture to Enhance the Performance of WAP 2.0 by Data Compression2005 / Zhanping Yin, Victor CM Leung
-
The Effects of Transmission Power Control in Mobile Ad-Hoc Sensor Networks
Abstract Preserving energy is a very critical issue in mobile ad-hoc sensor networks (MASNETs) because sensor nodes have a severe resource constraints due to their lack of processing power and limited in power supply. Since the communication is the...
2012 / Mohamad Nazim Jambli, Halikul Lenando, Kartinah Zen, Sinarwati Mohamad Suhaili, Alan Tully -
Power System Voltage Stability Assessment through Artificial Neural Network
Abstract Voltage stability is concerned with the ability of a power system to maintain acceptable voltages at all buses in the system under normal conditions and after being subjected to a disturbance. This paper presents a new technique to...
2012 / O.P. Rahi, Amit Kr Yadav, Hasmat Malik, Abdul Azeem, Bhupesh Kr