Electrical engineering, electronic engineering, information engineering topic list of research papers
-
Home Appliance Management System for Monitoring Digitized Devices Using Cloud Computing Technology in Ubiquitous Sensor Network Environment2014 / Yun Cui, Myoungjin Kim, Yi Gu, Jong-jin Jung, Hanku Lee
-
Distributed Mobile Sensor Networks for Hazardous Applications2012 / Frank Ehlers, Don Sofge, Mandar Chitre, John Potter
-
An Energy-Efficient Data Delivery Scheme for Delay-Sensitive Traffic in Wireless Sensor Networks2010 / Harshavardhan Sabbineni, Krishnendu Chakrabarty
-
Dubhe: A Reliable and Low-Latency Data Dissemination Mechanism for VANETs2013 / Lifeng Zhang, Beihong Jin
-
TPMS Interference Suppression Based on Beamforming Technology2013 / Cheol Park, Seong-min Kim, Suk-seung Hwang
-
Novel Features for Brain-Computer Interfaces2007 / W. L. Woon, A. Cichocki
-
Advanced Applications of Wireless Sensor Network Using Sensor Cloud Infrastructure2014 / Tetsuo Kinoshita, Yujin Lim, Gianluigi Ferrari
-
Human-Mobility-Based Sensor Context-Aware Routing Protocol for Delay-Tolerant Data Gathering in Multi-Sink Cell-Phone-Based Sensor Networks2012 / M. B. Shah, S. N. Merchant, U. B. Desai
-
Localization with Single Stationary Anchor for Mobile Node in Wireless Sensor Networks2013 / Haipeng Qu, Guojia Hou, Ying Guo, Ning Wang, Zhongwen Guo
-
Mobile Sensing and Actuating with Ubiquitous Computing2012 / Mo Li, Yunhao Liu, Xiang-Yang Li
-
Feature-based fast coding unit partition algorithm for high efficiency video coding
Abstract High Efficiency Video Coding (HEVC), which is the newest video coding standard, has been developed for the efficient compression of ultra high definition videos. One of the important features in HEVC is the adoption of a quad-tree based...
2015 / Yih-Chuan Lin, Jian-Cheng Lai -
Space-Time-Frequency Characterization of 3D Nonisotropic MIMO Multicarrier Propagation Channels Employing Directional Antennas2008 / HamidrezaSaligheh Rad, Saeed Gazor
-
A Wireless Powering and Communication System for Implantable Devices Based on a Royer Oscillator with Radio and Near-field Communication Links
Abstract A compact wireless power and communication development system for implantable devices was designed and tested with two receiver circuits based on a 433MHz separate RF link and near-field communication link using the power transfer field....
2015 / Marko Bakula, Patrick Pelgrims, Robert Puers -
C2MP: Chebyshev chaotic map-based authentication protocol for RFID applications2015 / Zhihua Zhang, Huanwen Wang, Yanghua Gao
-
Geometric Optimization Design System Incorporating Hybrid GRECO-WM Scheme and Genetic Algorithm
Abstract This article seeks to outline an integrated and practical geometric optimization design system (GODS) incorporating hybrid graphical electromagnetic computing-wedge modeling (GRECO-WM) scheme and the genetic algorithm (GA) for calculating...
2009 / Ye Shaobo, Xiong Junjiang -
Three-level Back-to-Back Converter Simulation for Wind Turbine Energy Source
Abstract This paper presents the simulation of three-level back-to-back converter for wind turbine energy source. For this paper, it will be focused on wind turbine energy source and determined the voltage from wind turbine energy source being...
2013 / Nathabhat Phankong, Nawin Yuktanon, Krischonme Bhumkittipich -
Physical layer security in power line communication networks: an emerging scenario, other than wireless2014 / Alberto Pittolo, Andrea M. Tonello
-
Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method
Abstract Residual stresses and their distribution within individual layers are a general concern in thin film technology. Here we use a recently developed ion beam layer removal method to determine the stress profile in a thin film system. The...
2014 / R. Schöngrundner, R. Treml, T. Antretter, D. Kozic, W. Ecker, et al. -
The effect of temperature mismatch on thermoelectric generators electrically connected in series and parallel
Abstract The use of thermoelectric generators (TEGs) to recover useful energy from waste heat has increased rapidly in recent years with applications ranging from microwatts to kilowatts. Several thermoelectric modules can be connected in series...
2014 / Andrea Montecucco, Jonathan Siviter, Andrew R. Knox -
An Integrated Approach to Analyze Change-situations in the Development of Production Systems
Abstract This paper presents an integrated approach to analyze change-situations that occur during the development of production systems to support a holistic estimation of potential effects of engineering changes on the system itself as well as on...
2014 / Konstantin Kernschmidt, Florian Behncke, Nepomuk Chucholowski, Martina Wickel, Gülden Bayrak, et al.