Electrical engineering, electronic engineering, information engineering topic list of research papers
-
Invulnerability mechanism based on mobility prediction and opportunistic cloud computing with topological evolution for wireless multimedia sensor networks2015 / Jianming Zhou, Tao Dong
-
Multi-objective Design of a Modular Power Converter based on Medium Frequency AC-link for Offshore DC Wind Park
Abstract The design of a modular power converter based on medium frequency AC-Link for offshore wind turbines regarding efficiency, power density and power to mass ratio is described in this paper. The impact of four design parameters in the three...
2013 / Rene Barrera-Cardenas, Marta Molinas -
A Steady-State Voltage Stability Analysis of Power Systems With High Penetrations of Wind2009 / E. Vittal, M. O'Malley, A. Keane
-
On Defining Information and Communication Technology Requirements and Associated Challenges for ‘Energy and Comfort Active’ Buildings
Abstract The intention of this article is to highlight considerations and ensuing challenges encountered in attempts to define communication requirements for the proposed multi-agent based building energy management systems. This is within the...
2014 / Kennedy O. Aduda, Wim Zeiler, Gert Boxem, Timilehil Labeodan -
Constraint-Driven Test Scheduling for NoC-Based Systems2006 / E. Cota, C. Liu
-
Performance-aware Energy Saving Mechanism in Interconnection Networks for Parallel Systems
Abstract The growing processing power of parallel computing systems require interconnection networks a higher level of complexity and higher performance, thus consuming more energy. Link components contributes a substantial proportion of the total...
2014 / Hai Nguyen, Daniel Franco, Emilio Luque -
Active Video Surveillance Based on Stereo and Infrared Imaging2007 / Gabriele Pieri, Davide Moroni
-
Doppler rate estimation on coherent sinusoidal pulse train and its Cramer–Rao lower bound
Abstract The Doppler rate estimation on coherent sinusoidal pulse train, which can be applied in the passive emitter location systems, is investigated in this paper. When the pulse repetition interval (PRI) is constant, a DFT-based Doppler rate...
2014 / Zhen-miao Deng, Mao-zhong Fu, Xiao-fang Wu, Yi-xiong Zhang -
Passive Intermodulation Due to Self-Heating in Printed Transmission Lines2010 / Eduard Rocas, Carlos Collado, Nathan D. Orloff, Jordi Mateu, Alberto Padilla, et al.
-
Case studies on the influence of microstructure voids on thermal conductivity in fractal porous media
Abstract Several studies have shown that fractal geometry is a tool that can replicate and investigate the nature of the materials and their physical properties. The Sierpinski carpet is often utilized to simulate porous microstructures. By using...
2013 / Giorgio Pia, Ulrico Sanna -
Performance Analysis on EV Mode of the 2012 Toyota Hybrid
Abstract Hybrid vehicle utilizes electric motor as one of the prime mover in its system. One of the hybrid vehicles available in the Indonesian market today is the 2012 Toyota Camry Hybrid. Camry Hybrid uses PMSM (Permanent Magnet Synchronous...
2014 / Ken Abraham Pangaribuan, Agus Purwadi -
Evaluation of Power Efficient FIR Filter for FPGA based DSP Applications
Abstract This paper describes the design and implementation of low power FIR filter for digital signal processing (DSP) applications, using Xilinx 6V1X130T1FF1156 (Virtex-6 Low Power) field programmable gate array (FPGA) devices. DSP is a highly...
2014 / Subhankar Bhattacharjee, Sanjib Sil, Amlan Chakrabarti -
Application of W-band, Doppler Radar to Railgun Velocity Measurements
Abstract This paper describes a W-Band Doppler radar system in use at the electromagnetic launch facility at the Naval Surface Warfare Center in Dahgren, VA. Experimental results for a medium caliber railgun launch at 2000 m/s are presented. A...
2013 / Seth Myers, Raul Zapata-Ramos -
Shape mining: A holistic data mining approach for engineering design
Abstract Although the integration of engineering data within the framework of product data management systems has been successful in the recent years, the holistic analysis (from a systems engineering perspective) of multi-disciplinary data or data...
2014 / Lars Graening, Bernhard Sendhoff -
2D finite element analysis and force calculations for induction motors with broken bars
Abstract In this paper an ABC transient model of the three phase induction motor is developed that depends on self- and mutual inductance calculations based on accurate finite element analysis (FEA). This model can represent both healthy and broken...
2013 / Hanafy Hassan Hanafy, Tamer Mamdouh Abdo, Amr Amin Adly -
A Novel Square-Root Cubature InformationWeighted Consensus Filter Algorithm for Multi-Target Tracking in Distributed Camera Networks2015 / Yanming Chen, Qingjie Zhao
-
The gradual nature of threshold switching2014 / M Wimmer, M Salinga
-
Sensor Network Infrastructure for a Home Care Monitoring System2014 / Filippo Palumbo, Jonas Ullberg, Ales Štimec, Francesco Furfari, Lars Karlsson, et al.
-
Aquatic Debris Detection Using Embedded Camera Sensors2015 / Yong Wang, Dianhong Wang, Qian Lu, Dapeng Luo, Wu Fang
-
Models and Methods of Software Configuration Management2015 / Arturs Bartusevics, Leonids Novickis, Stefan Leye