Electrical engineering, electronic engineering, information engineering topic list of research papers
-
Evaluation of Effectiveness of Wavelet Based Denoising Schemes Using ANN and SVM for Bearing Condition Classification2012 / Vijay G. S., Kumar H. S., Srinivasa Pai P., Sriram N. S., Raj B. K. N. Rao
-
Level Set Based Coverage Holes Detection and Holes Healing Scheme in Hybrid Sensor Network2013 / Xiaosheng Yu, Chengdong Wu, Dongyue Chen, Nan Hu
-
Parameter estimation using the sliding-correlator’s output for wideband propagation channels2015 / Xuefeng Yin, Cen Ling, Myung-Don Kim, Hyun Kyu Chung
-
The Hybrid Taguchi-Genetic Algorithm for Mobile Location2014 / Chien-Sheng Chen, Jium-Ming Lin, Chin-Tan Lee, Chyuan-Der Lu
-
A Hybrid Approach for Improving the Data Quality of Mobile Phone Sensing2013 / Hong Min, Peter Scheuermann, Junyoung Heo
-
An Improved User Authentication Protocol for Healthcare Services via Wireless Medical Sensor Networks2014 / Muhammad Khurram Khan, Saru Kumari
-
Smart and Reconfigurable Antenna Applications in Wireless Sensor Networks2014 / Korkut Yegin, Adnan Kavak, Erdal Cayirci, Kapil Dandekar
-
Advanced Sensor Technology and Applications in Industrial Control System2013 / Tai-hoon Kim, Ruay-Shiung Chang, Carlos Ramos, Sabah Mohammed
-
Real-time AGC dispatch units considering wind power and ramping capacity of thermal units2015 / Jingyi ZHANG, Chao LU, Jie SONG, Junbo ZHANG
-
Optimal placement and sizing of multiple distributed generating units in distribution networks by invasive weed optimization algorithm
Abstract Distributed generation (DG) is becoming more important due to the increase in the demands for electrical energy. DG plays a vital role in reducing real power losses, operating cost and enhancing the voltage stability which is the objective...
2015 / D. Rama Prabha, T. Jayabarathi -
DWT and Hilbert Transform for Broken Rotor Bar Fault Diagnosis in Induction Machine at Low Load
Abstract In this paper a new technique for broken rotor bars diagnosis in induction machine at low load and non stationary state is proposed. The technique is used in order to remedy the problem from using the classical signal-processing technique...
2015 / B. Bessam, A. Menacer, M. Boumehraz, H. Cherif -
GDI based full adders for energy efficient arithmetic applications
Abstract Addition is a vital arithmetic operation and acts as a building block for synthesizing all other operations. A high-performance adder is one of the key components in the design of application specific...
2015 / Mohan Shoba, Rangaswamy Nakkeeran -
Small cell backhaul: challenges and prospective solutions2015 / Amir H. Jafari, David López-Pérez, Hui Song, Holger Claussen, Lester Ho, et al.
-
Reduction of Proximity Effect in Coil Using Magnetoplated Wire2007 / Tsutomu Mizuno, Shigemi Enoki, Takashi Asahina, Takayuki Suzuki, Masahiro Noda, et al.
-
Emotions and the Engineering of Adaptiveness in Complex Systems
Abstract A major challenge in the engineering of complex and critical systems is the management of change, both in the system and in its operational environment. Due to the growing of complexity in systems, new approaches on autonomy must be able to ...
2014 / M.G. Sánchez-Escribano, R. Sanz -
Investigating Flexible Carbon Capture Opportunities in the Australian Electricity Market
Abstract This paper investigates the use of a load-shifting strategy in combination with operating CO2 capture at different capture rates for one electricity company in NSW, Australia. Real electricity dispatch data is used to analyse the operating...
2013 / Yuanfei Zhang, Minh. T. Ho, Dianne E. Wiley -
Embedded Mine-Underground Application Software Design of Rescue Communication System
Abstract Embedded mine-underground application software design of rescue communication system is come up with the communication delay between underground rescues and command center which lead to inefficient in mine rescue. This application software...
2012 / Zhao Mengling, Jiang Qinqin -
Smart Solar Panels: In-situ Monitoring of Photovoltaic Panels based on Wired and Wireless Sensor Networks
Abstract This article presents the design methodology for an in-situ solar panel monitoring system based on wired and wireless sensor network technologies. The system presented provides in-situ performance data for each solar panel of a solar park...
2013 / P. Papageorgas, D. Piromalis, K. Antonakoglou, G. Vokas, D. Tseles, et al. -
A Robust Line Tracking Method based on a Multiple Model Kalman Filter Model for Mobile Projector Systems
Abstract Line tracking is essential for many real world applications of computer vision. In thispaper, we propose a computationally efficient line tracker that can robustly andaccurately track lines in an image. We use amultiple-model-Kalman filter...
2014 / Hung Kwun Fung, Kin Hong Wong -
Double-sided Linear Induction Motor Control Using Space Vector Pulse Width Modulation Technique
Abstract This paper presents a design and build of a double sided Linear Induction Motor (DSLIM) which is 500W., 300 Vmax 50Hz. power rating. The control Technique of the averaging Space Vector Pulse Width Modulation is applied into a 3 Phase...
2013 / Aunnon Buasre, Wanchai Subsingha