Civil engineering topic list of research papers
-
Material Test on Strain Fracture and Crack Opening Displacement Based on Digital Image Correlation Method2016 / J. Bian, Zx. Ge
-
Urban Transport System Reliability Indicators
Abstract In 2014–2015, the Transport Laboratory of the National Research Irkutsk State Technical University (TL-ISTU) participated in development of the Federal Methodological Guidelines “Quality Evaluation of Traffic Management”. This article...
2017 / Maxim Sharov, Alexander Mikhailov -
Comparison of short-term and long-term performances for polymer-stabilized sand and clay
Abstract A series of tests were carried out on sulfate rich, high-plasticity clay and poorly-graded natural sand to study the effectiveness of a methylene diphenyl diisocyanate based liquid polymer soil stabilizer in improving the unconfined...
2017 / Sepehr Rezaeimalek, Abdolreza Nasouri, Jie Huang, Sazzad Bin-Shafique, Simon T. Gilazghi -
BIM Interoperability Limitations: Australian and Malaysian Rail Projects2016 / Russell Kenley, Toby Harfield, Ali Behnam
-
Engineering Behavior of Concrete with Recycled Aggregate2016 / Afizah Ayob, Mohd. Ekhwan Razali, Salina Alias, Abdul Ghapar Ahmad, Dayang Siti Hazimmah Ali
-
Methods of Assessment of Accuracy of Road Surface Roughness Measurement with Profilometer
Abstract The paper presents comparative characteristics of the main types of profilometers used for measuring of longitudinal roughness of the road surface. Certain issues related to accuracy of road roughness measurement with profilometers are...
2017 / Nikolay Lushnikov, Petr Lushnikov -
Vibration Based Methods For Damage Detection In Structures2016 / E. Manoach, J. Warminski, L. Kloda, A. Teter
-
Reduction of Manual Handling with Loads and Activities Causing Musculosceletal Disorders in a Selected Workplace2016 / Rastislav Beňo, Zuzana Lenhardtová, Tomáš Zelenay
-
Statistical Modelling of the Resilient Behaviour of Unbound Granular Material2013 / Elsabe Van Aswegen, Wynand J. Vdm. Steyn
-
Identification of the Interference in the Investment Process During the Realization of a Shopping Centre – A Case Study2016 / M. Lendo-Siwicka, M. Połoński, K. Pawluk
-
Model of Passenger Counting System Data Treatment
Abstract In recent decades, the technologies for automated monitoring passenger throughput have been developing at a rapid pace. One of the most popular types of equipment is presented by various detectors counting incoming/outgoing passengers...
2017 / Olga Lebedeva, Alexander Mikhailov -
Hyponatremia – unfavourable prognostic factor in hepatic cirrhosis2016 / Aurelia Enescu, F. Petrescu, P. Mitruţ, V. Pădureanu, Octavia Ileana Petrescu, et al.
-
Impact of Recycled Aggregates on Selected Physical and Mechanical Characteristics of Cement Concrete
Abstract The issue of using construction rubble was recognized in Europe not earlier than in the nineties of the twentieth century. This was due to economic and ecological considerations. However, recycled aggregate is characterized by high...
2017 / Krzysztof Zieliński -
The transformation of waste Bakelite to replace natural fine aggregate in cement mortar
Abstract Bakelite material has been used to produce the various components for cars and consumer goods industry in Thailand. The growth of Bakelite consumption increases Bakelite waste. Bakelite waste is prohibited from disposing of direct...
2017 / Nopagon Usahanunth, Seree Tuprakay -
Risk Assessment in Transportation Systems2017 / Marek Młyńczak
-
Property Assessment of Hybrid Fiber-Reinforced Ultra-High-Performance Concrete2017 / Piotr Smarzewski, Danuta Barnat-Hunek
-
Development of Methods for Evaluating the Impact of Stress-Strain State Uniformity of Composite Pavements on Road Safety
Abstract The most important quality indicator to optimize the cement concrete and composite structural and technological solutions is the uniformity indicator which is not duly covered in existing regulatory and procedural documents. ...
2017 / Maria Klekovkina, Viktor Gorshkov, Anatolii Lialinov -
Development of a Building Structural System Using An IsoTruss ® Grid
Abstract Conventional frame building methods use orthogonal placement of beams and columns at the exterior of the building. Modern buildings with unconventional structural systems, such as diagrid systems, are becoming popular. In this study, the...
2017 / Tae-Heon Kim, Han-Ul Lee, Young-Chan Kim -
LIFE+2008 HUSH project results: a new methodology and a new platform for implementing an integrated and harmonized noise Action Plan and proposals for updating Italian legislation and Environmental Noise Directive2016 / Francesco Borchi, Monica Carfagni, Lapo Governi, Salvatore Curcuruto, Rosalba Silvaggio, et al.
-
Method for Adaptation and Implementation of Agile Project Management Methodology
Abstract Agile methodologies are widely implemented and used around the world. There are over 20 different agile methodologies and their types. Choosing and adaptation of the methodology depends on project types, company and its employees. Employee...
2017 / Arturs Rasnacis, Solvita Berzisa