Civil engineering topic list of research papers
-
Beam-Column In-Plane Resistance Based on the Concept of Equivalent Geometric Imperfections2017 / M.A. Giżejowski, R.B. Szczerba, M.D. Gajewski, Z. Stachura
-
Evaluation of methods of comparative analysis of sums of atmospheric precipitation measured with the classical method and with a contact-less laser rain gauge2016 / Małgorzata Biniak-Pieróg, Gabriela Biel, Wiesław Szulczewski, Andrzej Żyromski
-
Selected aspects of designing deep excavations2016 / Rafał F. Obrzud, Sébastien Hartmann, Krzysztof Podleś
-
Laser Scanning in Engineering Surveying: Methods of Measurement and Modeling of Structures2016 / Grzegorz Lenda, Andrzej Uznański, Michał Strach, Paulina Lewińska
-
Determination of Rectification Corrections for Semi Gantry Crane Rail Axes in the Local 3D Coordinate System2015 / Daria Filipiak, Waldemar Kamiński
-
Design and control optimisation of adaptive insulation systems for office buildings. Part 1: Adaptive technologies and simulation framework
Abstract The increasing insulation levels imposed by building regulations have the effect of reducing heating energy use, while increasing cooling energy use and/or reducing thermal comfort especially in summer. Adaptive insulation technologies...
2017 / Fabio Favoino, Qian Jin, Mauro Overend -
The Impact of the Variability of Precipitation and Temperatures on the Efficiency of a Conceptual Rainfall-Runoff Model2017 / P. Sleziak, J. Szolgay, K. Hlavčová, J. Parajka
-
Application of Nanomaterials in Production of Self-Sensing Concretes: Contemporary Developments and Prospects2016 / E. Horszczaruk, P. Sikora, P. Łukowski
-
Research Into Influence of Ultra- and Nanodisperse Size Additives on the Structure and Properties of Heat Insulating Autoclaved Aerated Concrete
Abstract The paper presents the results of the research into the influence of various ultra- and nanodisperse size additives on the structure and mechanical-and-physical properties of heat insulating autoclaved aerated concrete (AAC). Research into...
2017 / Stepan Leontev, Kseniya Saraykina, Viktor Golubev, Grigory Yakovlev, Nailya Rakhimova, et al. -
Exploring the Influence of the Congested Downstream on Traffic Flow at its Upstream Bottlenecks
Abstract With the rapid increase of the private cars, urban road congestion is getting worse. As known, when the downstream section is free flow, the congestion for every bottleneck section starts from the bottleneck cell, and then gradually...
2014 / Nan Geng, Xiaomei Zhao, Dongfan Xie -
Behaviour of Cohesive Soil Subjected to Low-Frequency Cyclic Loading in Strain-Controlled Tests2015 / Marta Kalinowska, Małgorzata Jastrzębska
-
Prediction of Ejected Mass from Hybrid-Fiber Reinforced Concrete Slabs subjected to Impact Loads
Abstract Reinforced concrete (RC) slabs, plates and walls are likely to be impacted by projectiles which may cause ejection of concrete mass in the form of secondary projectiles. One of the aims of mixing hybrid fibers (i.e. fibers containing steel...
2017 / Husain Abbas, Tarek Almusallam, Yousef Al-Salloum, Nadeem Siddiqui -
Effects Of Compressed Air Foam Application On Heat Conditions In Fire Within A Closed Space2016 / Adam Thomitzek, Jan Ondruch, Dana Chudová, Petr Kučera
-
Supporting collaboration in interdisciplinary research of water–energy–food nexus by means of ontology engineering
Abstract Study region We do not target particular region, but we implement the workshop experiments towards the researcher groups in the laboratories. Study focus ...
2016 / Terukazu Kumazawa, Keishiro Hara, Aiko Endo, Makoto Taniguchi -
Graph Theory and Its Application in Optimization of Gas Drainage System in Coal Mine
Abstract Gas drainage is an important gas treatment measure. With changing the location and gas drainage quantity of the system, some reasonless phenomena would occur, Hence, the system must be optimized. According to the relation of graph theory...
2012 / Qing Ye, Haizhen Wang, Zhenzhen Jia, Yan Pi -
Concrete Strength Development Function According to MC 2010 in the Light of Tests
Abstract The issue of accuracy in calculation of concrete compressive strength, especially for a maturity period longer than 28 days, is useful in some calculations during designing concrete structures. The MC 2010 pre-standard and the PN-EN...
2015 / Janusz Mierzwa -
Computer Modelling of Precast Large-panel Buildings with Degraded Horizontal Joints
Abstract The paper presents results of computer modelling and analysis of typical precast large-panel multi-storey apartment buildings. Two- and three-dimensional FEM models of an exemplary building as well as ideal and degraded models of horizontal ...
2015 / Jacek Barański, Piotr Berkowski -
The Least Squares Stochastic Finite Element Method in Structural Stability Analysis of Steel Skeletal Structures2015 / M. Kamiński, J. Szafran
-
Crushed Rock Sand-An economical and ecological alternative to natural sand to optimize concrete mix
Summary The study investigates the use of crushed rock sand as viable alternative to Natural River sand that is being conventionally used as fine aggregate in cement concrete. Various mix designs were developed for different grades of concrete based ...
2016 / Sanjay Mundra, P.R. Sindhi, Vinay Chandwani, Ravindra Nagar, Vinay Agrawal -
Achieving environmentally friendly building envelope for Western Australia’s housing sector: A life cycle assessment approach
Abstract The rapid growth of Western Australia’s population and economy will affect the sustainability of its building sector. The energy consumption of all processes during mining to material production, transportation, construction plant and...
2016 / Krishna Kumar Lawania, Wahidul K. Biswas