Civil engineering topic list of research papers
-
Damped Vibrations of Hydraulic Cylinder with a Spring-damper System in Supports
Abstract The description of the damped vibrations of hydraulic cylinder has been presented in this paper. The dissipation of vibration energy was caused by different kinds of damping on vibrations of hydraulic cylinder. Damping in adopted model is a ...
2017 / Wojciech Sochacki, Marta Bold -
SIMULATION METHOD OF DESIGNING AND SELECTING TENSIONING SYSTEMS FOR MINING BELT CONVEYORS2014 / Piotr Kulinowski
-
Evaluation of Functional Safety of Cement Concrete and Composite Pavements Exposed to Weather Conditions
Abstract This paper is intended to study the mechanism of strains and fractures emerging in pavement structures, give suggestions and recommendations to increase the robustness of different types of road pavements with the most appropriate design...
2017 / Anna Simonova -
New Methods and Approaches to Acoustic Monitoring and Noise Mapping of Urban Territories and Experience of it Approbation in Conditions of Samara Region of Russia
Abstract For the time being, acoustic impact to human inhabited areas has significantly increased. Imported methods of urban noise reduction are acoustic monitoring and noise mapping of urban territories. Important measures which allow for...
2017 / Andrey V. Vasilyev -
Experimental investigation of multi-span post-tensioned glass beams2017 / Jagoda Cupać, Kenny Martens, Alain Nussbaumer, Jan Belis, Christian Louter
-
Research on Construction Schedule Management Based on BIM Technology
Abstract The construction schedule management in the traditional mode will be affected by the natural environment, the objective environment and the subjective environment, leading to the interruption or obstruction in the construction process. But...
2017 / Xue Li, Jing Xu, Qun Zhang -
Comparison of Elastic and Viscoelastic Analysis of Asphalt Pavement at High Temperature
Abstract There are many various rheological models which are used for modeling of asphalt layers in flexible pavement structures. It can be expected that the use of various models may affect different results of mechanical pavement calculations and...
2017 / Łukasz Mejłun, Józef Judycki, Bohdan Dołżycki -
Behavior of Beam-to-Column Connections with Angles. Part 2-Numerical Analysis2016 / M. Ghindea, A. Cătărig, R. Ballok
-
3D stability analysis method of concave slope based on the Bishop method
Abstract In order to study the stability control mechanism of a concave slope with circular landslide, and remove the influence of differences in shape on slope stability, the limit analysis method of a simplified Bishop method was employed. The...
2017 / Tianwen Zhang, Qingxiang Cai, Liu Han, Jisen Shu, Wei Zhou -
Modelling the failure behaviour of wind turbines2016 / S Faulstich, V Berkhout, J Mayer, D Siebenlist
-
Corrosion Durability Estimation for Steel Shell of a Tank Used to Store Liquid Fuels
Abstract An original approach to forecasting the remaining safe service time of a corroded steel shell of a tank used to store liquid fuels is presented for the case where the reconstruction or repair is not planned. The estimated durability is...
2017 / Mariusz Maslak, Michal Pazdanowski, Janusz Siudut, Krzysztof Tarsa -
The Evaluation Of Algorithms For Determination Of The Reliability Index2015 / A. Dudzik, U. Radoń
-
Water, Air Emissions, and Cost Impacts of Air-Cooled Microturbines for Combined Cooling, Heating, and Power Systems: A Case Study in the Atlanta Region
Abstract The increasing pace of urbanization means that cities and global organizations are looking for ways to increase energy efficiency and reduce emissions. Combined cooling, heating, and power (CCHP) systems have the potential to improve the...
2017 / Jean-Ann James, Valerie M. Thomas, Arka Pandit, Duo Li, John C. Crittenden -
Assessment of road safety management at institutional level in Malaysia: A case study
Abstract This paper examines the current institutional arrangements for the management of road safety in Malaysia in a systematic manner. It focuses on road safety funding and seeks to provide an insight into how funding factors may affect both the...
2017 / Zarulazam Eusofe, H. Evdorides -
The Influence of Biomass Fly Ash on the Plasticizing Effects in Cement Pastes
Abstract The aim of this work is to determine the impact of biomass fly ash (BM-FA) on the plasticizing effects in cement pastes. The rheological properties of the cement pastes have been determined using rotational viscometer with coaxial cylinders ...
2017 / Gintautas Skripkiūnas, Mindaugas Macijauskas, Džigita Nagrockienė, Aurelijus Daugėla -
Finite Element Analysis and Optimal Design for the Frame of SX360 Dump Trucks
Abstract As bearing foundations of autos, the frame bears various forces and torques transmitted from engine, clutch, body, and cargo container. Analysis of natural vibration frequency and dynamic mode of the frame is an important process to ensure...
2017 / Yuan Ren, Yongchang Yu, Binbin Zhao, Chuanhui Fan, He Li -
Investigation of influential factors on the tensile strength of cold recycled mixture with bitumen emulsion due to moisture conditioning
Abstract The present study attempts to investigate the effect of moisture conditioning on the indirect tensile strength (ITS) of cold recycled mixture with bitumen emulsion. Firstly, samples were prepared using a Superpave gyratory compactor. They...
2017 / Mouhamed Bayane Bouraima, Yanjun Qiu -
The Mechanism of Disintegration of Cement Concrete at High Temperatures2016 / Vytautas Jocius, Gintautas Skripkiūnas
-
Use of Crumb Rubber as an Additive in Asphalt Concrete Mixture
Abstract As the rapidly growing number of vehicles in Indonesia, the waste of tire rubber becomes a major environmental concern. The use of crumb rubber, which is the recycled tire rubber, as an additive in hot mix asphalt mixture is considered as a ...
2017 / Paravita Sri Wulandari, Daniel Tjandra -
Impact of separated bottom ashes on the parameters of concrete mix and hardened concrete2016 / Daniel Wałach