Civil engineering topic list of research papers
-
Architect and contractor attitudes to waste minimisation2006 / M. Osmani, J. Glass, A. Price
-
Model tests of energy piles with and without a vertical load2016 / Cheng-long Wang, Han-long Liu, Gang-qiang Kong, Charles W. W. Ng, Di Wu
-
The Effect of Water Spray Systems on Thermal and Solar Performance of an ETFE Panel for Building Envelope
Abstract ETFE membranes are generally used in architecture for large roofing and façade systems, because of their transparency and lightness compared to glass alternatives. Multilayer ETFE panels are used to improve single membrane systems...
2016 / Andrea Giovanni Mainini, Alberto Speroni, Andrea Zani, Tiziana Poli -
Methodological Aspects of Qualitative-Quantitative Analysis of Decision-Making Processes2016 / Remigiusz Gawlik
-
High Carbon Ferro Chrome Slag – Alternative Mould Material for Foundry Industry
Abstract High silica sand is commonly used in foundry industry for sand moulds making. Various efforts are being made to use the industrial wastes as an alternate molding material in foundry to conserve the natural resources; and effective...
2016 / I. Narasimha Murthy, N. Arun Babu, J. Babu Rao -
Numerical Modeling of Simultaneous Heat and Moisture Transfer During Sewage Sludge Drying in Solar Dryer
Abstract Mathematical modelling of the drying process enables predicting results of adopted process parameters, providing information on the course of drying in different conditions. Obtained information may be used as a basis for optimisation of...
2016 / Piotr Krawczyk -
UK contractors’ views on self-compacting concrete in construction2012 / David Rich, Jacqui Glass, Alistair G. F. Gibb, Chris Goodier
-
Re-thinking UK transport emissions – getting to the 2050 targets2016 / Heleni Pantelidou, Gerard Casey, Tim Chapman, Peter Guthrie, Kenichi Soga
-
The Diesel and the Vegetable oil Properties Assessment in terms of Pumping Capability and Cooperation with Internal Combustion Engine Fuelling System2015 / Dariusz Szpica, Jarosław Czaban, Piotr Banaszuk, Emil Weresa
-
Inelastic Stability Analysis Of Uniaxially Compressed Flat Rectangular Isotropic CCSS Plate2015 / O.M. Ibearugbulem, U.G. Eziefula, D.O. Onwuka
-
Stress analysis without meshing: isogeometric boundary-element method2013 / Haojie Lian, Robert N. Simpson, Stéphane P. A. Bordas
-
Towards the future-proofing of UK infrastructure2016 / Tariq Masood, Duncan McFarlane, Ajith Kumar Parlikad, John Dora, Andrew Ellis, et al.
-
PRODUCTION ANALYSIS APPLIED TO WORK IMPROVEMENT.2007 / JR BROOMFIELD, AD PRICE, FC HARRIS
-
“Bus Lane Within The Area Of Intersection” Method For Buses Priority On The Intersections2015 / Ihor Vikovych, Roman Zubachyk
-
Influence of Compliance Criteria on the Value of Reliability Index2016 / I. Skrzypczak, L. Buda-Ożóg
-
On the Pile Response to Inclined Loads
Abstract In this paper, a three-dimensional finite element approach is used to analyse the response of reinforced concrete piles to inclined loads. Appropriate constitutive models are considered to account for the nonlinear behaviour of the pile and ...
2016 / Enrico Conte, Antonello Troncone, Mirko Vena -
Automatic Incident Detection at Intersections with Use of Telematics
Abstract While there are many examples of Intelligent Transport System deployments in Poland, more attention should be paid to traffic incident management and detection on dual-carriageways and urban street networks. One of the aims of CIVITAS...
2016 / Jacek Oskarbski, Marcin Zawisza, Karol Żarski -
Damage grading system for severity assessment on concrete structure
Abstract Acoustic Emission (AE) is a high frequency stress wave generated by rapid release of energy in solid material due to changes such as crack initiation and growth. High sensitivity to crack growth, the ability to locate the source, its...
2016 / Shahiron Shahidan, Sharifah Salwa Mohd Zuki, Norwati Jamaluddin -
Field validation of fibre Bragg grating sensors for measuring strain on driven steel piles2015 / P. Doherty, D. Igoe, G. Murphy, K. Gavin, J. Preston, et al.
-
Improving the Efficiency of Cellular Automata for Sewer Network Design Optimization Problems Using Adaptive Refinement
Abstract This paper introduces an adaptive procedure to improve the efficiency of a two phase simulation-optimization cellular automata algorithm recently proposed by the authors for the optimal design of household sewer networks. In the proposed...
2016 / M.H. Afshar, M.M. Zaheri, J.H. Kim