Civil engineering topic list of research papers
-
Experimental Investigation of Multi-Material Aluminum-to-Steel and GFRP-to-Steel Bonded and Bolted/Bonded Connections2016 / Therese Ako Donfack Tajeuna, Frédéric Légeron, Sébastien Langlois, Pierre Labossière, Marc Demers
-
RGB–D terrain perception and dense mapping for legged robots2016 / Dominik Belter, Przemysław Łabecki, Péter Fankhauser, Roland Siegwart
-
Modelling needle biomass in Scots pine (Pinus sylvestris L.) stands on former farmland and forest soils2012 / Tomasz Jelonek, Witold Pazdrowski, Ryszard Walkowiak, Arkadiusz Tomczak
-
Numerical Analysis of Test Embankment on Soft Ground Using Multi-Laminate Type Model with Destructuration / Analiza Numeryczna Nasypu Drogowego Posadowionego Na Gruncie Słabonosnym Z Zastosowaniem Modelu Wielopłaszczyznowego Z Destrukturyzacja2011 / M. Cundi
-
In Plane Cyclic Behavior of Masonry Walls Jacketed with Fiber Reinforced Mortar and Fiber Grids2013 / Viorel Popa, Radu Pascu, Andrei Papurcu
-
Numerical Solution of Hard Rock Disintegration Process – Part 2 / Numerické Řešení Procesu Rozpojování Tvrdých Hornin – Část 22014 / Karel Frydrýšek
-
Design of a detention reservoir2011 / K. Cipovová
-
Key Success Factors for City Logistics from the Perspective of Various Groups of Stakeholders
Abstract The main aims of city logistics are sustainability, mobility and quality of life by implementing various activities. There are several projects all over the world related to urban passenger and freight transport which have been implemented...
2016 / Maja Kiba-Janiak -
Self and Artificial Air Entrainment in Steep Channel
Abstract High flow velocity causes a low pressure even negative, especially in steep channel bed. Force caused by negative pressure will lift the bed surface and side walls of the building hydraulic structures, which can lead to flaking on the bed...
2015 / Yeri Sutopo, Budi S. Wignyosukarto, Bambang Yulistyanto, Istiarto -
Identifying Uncertainties Toward Sustainable Projects
Abstract Building Information Modeling (BIM) is an evolutionary idea designed to ensure performance is evaluated continuously over the whole life of a given asset. Over the last decade significant emphasis has been placed on the design and...
2015 / Georgios Kapogiannis, Mark Gaterell, Eleni Oulasoglou -
Application of energy management coupled with fuel switching on a hydrotreater unit
Abstract In the last decades, saving energy and protecting environment became the most important topics for search and survey. The energy engineer for any chemical process is obliged by restrictions of “Kyoto Protocol” for limitation of carbon...
2016 / Eman M. Gabr, Soad M. Mohamed, Seham A. El-Temtamy, Tahani S. Gendy -
The timber truss: The studying of the behaviour of the spatial framework joint
Summary Using of timber in civil engineering is increasing at the moment. Main timber elements are used for main supporting structures, typically for buildings, roofs, footbridges or towers. This work studies unique timber trusses as a supporting...
2015 / Jana Rumlová, Roman Fojtík -
Water distribution Network Management in Emergency Conditions
Abstract The management of Water Distribution Systems (WDS) is strictly connected to the emergency conditions. Critical events can cause the inefficiency of the network, so the head in some nodes could be inadequate to guarantee the service for the...
2015 / Attilio Fiorini Morosini, Olga Caruso, Paolo Veltri, Francesco Costanzo -
COMPARISON OF SUSTAINABILITY BETWEEN PRIVATE AND PUBLIC TRANSPORT CONSIDERING URBAN STRUCTURE
It is said that the car is convenient but consumes high-energy per passenger, while public transport is an environmentally friendly mode but needs high cost of investment and management. However, this view does not take account of urban structure such as...
2014 / Masanobu KII, Shinya HANAOKA -
The Mixed Model for the Residential Flow Demand of a Small Number of Users
Abstract The WDS hydraulic performances strongly depend on the users water demand, indeed any hydraulic simulation is doomed to fail in absence of a reliable modeling of the flow request. The paper takes into account the Mixed...
2014 / R. Gargano, C. Tricarico, S. Buchberger, G. del Giudice, F. Di Palma -
SAFETY-BASED CAPACITY ANALYSIS FOR CHINESE HIGHWAYS
Many years of research have led to the development of theories and methodologies in roadway capacity analysis in the developed countries. However, those resources coexist with roadway design and traffic control practices in the local country, and cannot be simply...
2014 / Ping YI, John LU, Yucheng ZHANG, Huapu LU -
Discharge Headway Model for Heterogeneous Traffic Conditions
Abstract Discharge headway is the headway between successive vehicles negotiating an intersection during the green time of signal oper- ation. It is an important parameter in signal operations and analysis since estimation of parameters such as...
2015 / Sanjay Radhakrishnan, Gitakrishnan Ramadurai -
Safety Risk Analysis and Countermeasures Study on Regular Mass Passenger Flow of China's Urban Subway
Abstract In view of the normalization and complicate trends and current situations of China's mass urban passengers, this article determines the definition of “mass passenger flow” and its judgment standards, analyzes causes for mass passenger flow...
2016 / Jun-tao Yang -
Safety risk management of underground engineering in China: Progress, challenges and strategies
Abstract Underground construction in China is featured by large scale, high speed, long construction period, complex operation and frustrating situations regarding project safety. Various accidents have been reported from time to time, resulting in...
2016 / Qihu Qian, Peng Lin -
Fully reversible reinforcement of softwood beams with unbonded composite plates
Abstract In this paper, results of flexure tests aimed at improving the structural behavior of softwood beams reinforced with unglued composite plates and at developing an effective alternative to the use of organic resins are presented. The...
2016 / Marco Corradi, Antonio Borri, Giulio Castori, Emanuela Speranzini