Civil engineering topic list of research papers
-
Physical and Mechanical Properties of Cementitious Specimens Exposed to an Electrochemically Derived Accelerated Leaching of Calcium2015 / Arezou Babaahmadi, Luping Tang, Zareen Abbas, Per Mårtensson
-
World-modeling Possibilities of the Speech Genre Administrative Announcement in the City Discourse
Abstract In the article the world-modeling possibilities of the administrative announcement in the Russian language are considered. As a complex of informative and imperative speech genre of natural and official written language, it registers...
2014 / Natalia A. Karpova, Alla L. Sheketera -
The Effects of Long-time Strong Wave Condition on Breakwater Construction
Abstract In this paper, long-time strong wave condition is defined according to the comparison between the China's Ocean and the Indian Ocean, as well the characteristic of long-time strong wave condition is described. Combined with practical works, ...
2015 / S. Chen, G. Liang, H. Chen, R. Zhou -
Discussion on the Influence of Various Technological Parameters on Jet Grouting Columns Geometry2015 / Joanna Bzówka, Anna Juzwa, Konrad Wanik, Lidia Wanik, Tomasz Żyrek
-
Effect of Fiber on the Concrete Resistance to Surface Scaling Due to Cyclic Freezing and Thawing
Abstract Frost damage is considered to be a typical material deterioration in the concrete structures subjected to external environmental conditions. The effect of different types of steel and polypropylene fibers on the surface scaling resistance...
2015 / Piotr Berkowski, Marta Kosior-Kazberuk -
Modified Asphalt Binder with Natural Zeolite for Warm Mix Asphalt2015 / Marián Dubravský, Ján Mandula
-
Performance-based intersection layout under a flyover for heterogeneous traffic2015 / Avijit Maji, Akhilesh Kumar Maurya, Suresh Nama, Prasanta K. Sahu
-
Effect of Mixing Ingredient on Compressive Strength of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash
Abstract The increasingly generated oil palm shell (OPS) and palm oil fuel ash (POFA) which is a by-product of Malaysian palm oil mills annually, has lead towards the effort of integrating palm oil fuel ash as mineral admixture in lightweight...
2015 / Khairunisa Muthusamy, Nurazzimah Zamri, Mohammad Amirulkhairi Zubir, Andri Kusbiantoro, Saffuan Wan Ahmad -
The Effects of the Frame Ratio and Glass on the Thermal Performance of a Curtain Wall System
Abstract The curtain wall system is widely used in high-rise buildings because of its many advantages. With the increasing demands for building energy efficiency, thermal performance has become an important consideration in developing curtain wall...
2015 / Min Jung Bae, Ji Hyun Oh, Sun Sook Kim -
Finite element analysis of a concrete-rigid wall retaining a reinforced backfill2015 / Machhindra S. Purkar, Sunil Kute
-
Implementing multi objective genetic algorithm for life cycle carbon footprint and life cycle cost minimisation: A building refurbishment case study
Abstract Early design decisions made by architects have been shown to significantly impact the energy performance of buildings. However, designers often lack the resources or knowledge to take informed decisions that might improve building...
2016 / Yair Schwartz, Rokia Raslan, Dejan Mumovic -
Foresight Study of Road Pavement Technologies
Abstract The objectives of this paper are foresight study of the anticipated needs and requirements as well as identification of development directions of materials and technologies for use in road construction in the time perspective of...
2015 / Joanicjusz Nazarko, Piotr Radziszewski, Katarzyna Dębkowska, Joanna Ejdys, Alicja Gudanowska, et al. -
Neglect Of Parameter Estimation Uncertainty Can Significantly Overestimate Structural Reliability2016 / Árpád Rózsás, Miroslav Sýkora
-
Flexural Behaviour Of Reinforced Concrete Beams Containing Expanded Glass As Lightweight Aggregates2016 / Jamal Khatib, Adrian Jefimiuk, Sammy Khatib
-
Technology for Erecting Sandwich External Walls with Heat Insulation Layer Made of Low Conductivity Concrete
Abstract In general, technologies of enclosure structures erection (e.g. curtain wall systems with ventilated air gap, finished with thin plaster layers; sandwich masonry) widely used in the building industry are increasingly labor-intensive, time...
2015 / Yuri Kharkin, Elena Korol, Artem Davidyuk -
Analysis on Campus Energy Consumption and Energy Saving Measures in Cold Region of China
Abstract Construction of conserving campus is necessary to achieve sustainable development. Taking North China University Of Science and Technology for example, this paper proposes systematically how to launch subjects of actual measurement and...
2015 / Ying Han, Xuejie Zhou, Ruijiang Luo -
An uncertain model for RCPSP with solution robustness focusing on logistics project schedule
Abstract Logistics project scheduling problem in indeterminate environment is gaining more and more attention in recent years. One effective way to cope with indeterminacy is to develop robust baseline schedule. There exist many related researches...
2015 / Hua Ke, Lei Wang, Hu Huang -
Design And Construction Problems Connected With Ensuring Even Thermal Insulation Of Single-Layer Walls2016 / Bohdan Stawiski
-
Lean Maintenance Roadmap
Abstract Maintenance shares significant operating costs in an organisation. It is considered as a main pillar of the organisational performance. Lean thinking can be incorporated into maintenance activities through applying its principles and...
2015 / Sherif Mostafa, Jantanee Dumrak, Hassan Soltan -
Study on BIM Utilization for Design Improvement of Infrastructure Project
Abstract Virtual construction could be done by using Building Information Modelling technology. But, to do that, information and knowledge on construction phase or fabrication phase should be available in design stage. In Japan, MLIT had been taking ...
2015 / Masaru Minagawa, Shunji Kusayanagi