Chemical sciences topic list of research papers
-
Recent advances in malaria drug discovery
Abstract This digest covers some of the most relevant progress in malaria drug discovery published between 2010 and 2012. There is an urgent need to develop new antimalarial drugs. Such drugs can target the blood stage of the disease to alleviate...
2013 / Marco A. Biamonte, Jutta Wanner, Karine G. Le Roch -
Recent Developments in the Chemistry of Deoxyribonucleic Acid (DNA) Intercalators: Principles, Design, Synthesis, Applications and Trends2009 / Brenno A. D. Neto, Alexandre A. M. Lapis
-
Methodology for isolation, identification and characterization of microvesicles in peripheral blood
Abstract Rationale Analyses of circulating cell membrane-derived microvesicles (MV) have come under scrutiny as potential diagnostic and prognostic biomarkers of disease. However, methods to isolate, label and quantify MV have been ...
2011 / Muthuvel Jayachandran, Virginia M. Miller, John A. Heit, Whyte G. Owen -
Growth and Characterization of Holmium Oxalate Heptahydrate Crystals2012 / Basharat Want, Feroz Dar
-
Synthesis and application of Amberlite xad-4 functionalized with alizarin red-s for preconcentration and adsorption of rhodium (III)2012 / Hossein Sid Kalal, Homayon Ahmad Panahi, Hassan Hoveidi, Mohammad Taghiof, Mahnaz Taheri Menderjani
-
Environmentally Sensitive Fluorescent Sensors Based on Synthetic Peptides2010 / Laurence Choulier, Karin Enander
-
Effective Supramolecular Chirogenesis in Ethane-Bridged Bis-Porphyrinoids2010 / Victor Borovkov
-
Environmentally Benign Synthetic Protocol for O-Alkylation of <i>β</i>-Naphthols and Hydroxy Pyridines in Aqueous Micellar Media2012 / Kancharla Rajendar Reddy, Kamatala Chinna Rajanna, Soma Ramgopal, Mukka Satish Kumar, Sariah Sana
-
Morphology and Mechanical Properties of Palm Based Fly Ash Reinforced Dynamically Vulcanized Natural Rubber/Polypropylene Blends
Abstract Palm based fly ash (PFA) is a solid waste of palm oil processing industry which contains silica components. These components are typically used to improve the mechanical properties of rubber-based products. This research aims to study the...
2012 / Bahruddin, A. Ahmad, A. Prayitno, R. Satoto -
Transfer Rate of Ruthenium from Calcination Layer to Glass Melt
Abstract To clarify the transfer rate of FP elements from the calcination layer to the glass melt, we have studied the transfer rate of ruthenium. A 1.0 g of sodium ruthenate or ruthenium dioxide was placed on the surface of a 20 g of borosilicate...
2012 / Kayo Sawada, Takahiro Shimada, Takeshi Tsukada, Satoshi Komamine, Eiji Ochi -
Novel Sorption Materials for Radionuclide Recovery from Nitric Acid Solutions: Solid-Phase Extractants and Polymer Composites based on Carbon Nanotubes
Abstract Two novel types of sorption materials for radionuclide recovery from nitric acid solutions have been developed: the solid-phase extractants prepared by impregnation of carbon nanotubes with organophosphorus and nitrogen containing ligands,...
2012 / Elena Zakharchenko, Olga Mokhodoeva, Dmitry Malikov, Nadezhda Molochnikova, Yuri Kulyako, et al. -
The use of chromophore and fluorophore degradation to quantitate UV dose: FD&C dyes as chemical identicators for UV sterilization
Abstract The accurate measurement of ultraviolet (UV) irradiation, especially within a container or vessel is one of the challenges facing the broad implementation of UV sterilization. Currently, biological indicators are the best method to...
2012 / Karson S. Putt, Edward R. Kernick, Brieanna K. Lohse, James Lomboy, Terry O'Brien, et al. -
Combination of FIA-CL Technique with ion-exchanger for determination of sulphate in various water resources in Erbil City
Abstract A new flow injection chemiluminescence system is developed for determination of anions like sulphate. The method is based on the displacement of an equivalent amount of bromide ion on a Br− from an ion-exchange minicolumn by sulphate. The...
2010 / Diyar Salahuddin Ali, Azad T. Faizullah -
Computer-Aided Drug Design: An Innovative Tool for Modeling2012 / Pranita P. Kore, Madhavi M. Mutha, Rishikesh V. Antre, Rajesh J. Oswal, Sandip S. Kshirsagar
-
Silica/Polyethylene Nanocomposite Particles from Catalytic Emulsion Polymerization2006 / Vincent Monteil, Jörg Stumbaum, Ralf Thomann, Stefan Mecking
-
Application of Artificial Neural Network (ANN) for the prediction of EL-AGAMY wastewater treatment plant performance-EGYPT
Abstract A reliable model for any Wastewater Treatment Plant WWTP is essential in order to provide a tool for predicting its performance and to form a basis for controlling the operation of the process. This would minimize the operation costs and...
2012 / Mahmoud S. Nasr, Medhat A.E. Moustafa, Hamdy A.E. Seif, Galal El Kobrosy -
Toward Biophysical Probes for the 5-HT 3 Receptor: Structure−Activity Relationship Study of Granisetron Derivatives2010 / Sanjeev Kumar V. Vernekar, Hasan Y. Hallaq, Guy Clarkson, Andrew J. Thompson, Linda Silvestri, et al.
-
Combinatorial Chemistry Online2008 / N.K. Terrett
-
Accelerator mass spectrometry (AMS) in plutonium analysis2013 / Dagmara I. Strumińska-Parulska
-
Polyolefins Waste Materials Reconditioning Using Dissolution/Reprecipitation Method
Abstract Recycling of waste polymer based on low-density polyethylene (LDPE), high-density polyethylene (HDPE) or polypropylene (PP) is studied by dissolution/reprecipitation method. In this technique, Toluene and petroleum ether (PetE) as solvents...
2012 / Arkan Jasim Hadi, Ghazi Faisal Najmuldeen, Iqbal Ahmed