Chemical engineering topic list of research papers
-
A Comparative Evaluation of TiO2 Suspension Coating Techniques: A Novel Technique to Achieve Optimal Thickness and Uniformity of Photocatalytic Film2012 / Masoud Rismanchian, Farideh Golbabaei, Yadollah Mortazavi, Gholamhossein Pourtaghi, Abbas Rahimi Foroushani, et al.
-
Preparation, Photocatalytic Activity, and Recovery of Magnetic Photocatalyst for Decomposition of Benzoic Acid2011 / Te-Li Su, Chyow-San Chiou, Hua-Wei Chen
-
The Effect of Ultrasonic Treatment on Thermal Stability of the Cured Epoxy/Layered Silicate Nanocomposite2012 / N. Y. Yuhana, S. Ahmad, A. R. Shamsul Bahri
-
Large-Eddy Simulation of a Turbulent Spray Flame Using the Flamelet Generated Manifold Approach
Abstract In order to meet the increasingly stringent regulations in terms of pollutant emissions adopted by ICAO-CAEP in last years, a redesign of aero-engine combustors has been required and, today, lean combustion technology can be considered as...
2015 / A. Andreini, D. Bertini, B. Facchini, S. Puggelli -
Recent Advances in Valorization Methods of Inorganic/Organic Solid, Liquid, and Gas Wastes2012 / Licínio M. Gando-Ferreira, Faïçal Larachi, Santiago Esplugas
-
Local Area Water Removal Analysis of a Proton Exchange Membrane Fuel Cell under Gas Purge Conditions2012 / Chi-Yuan Lee, Yu-Ming Lee, Shuo-Jen Lee
-
Numerical analysis of the influence of circuit arrangement on a fin-and-tube condenser performance
Abstract In the present paper a model for the steady-state simulation of fin-and-tube condenser is developed. The model is based on a finite volume approach that divides each tube into small elemental volumes where mass, momentum and energy...
2015 / Cesare Maria Joppolo, Luca Molinaroli, Alberto Pasini -
Sorption Kinetics Of Selected Heavy Metals Adsorption To Natural And Fe(III) Modified Zeolite Tuff Containing Clinoptilolite Mineral2015 / Maroš Sirotiak, Marek Lipovský, Alica Bartošová
-
Techno-economics of carbon preserving butanol production using a combined fermentative and catalytic approach
Abstract This paper presents a novel process for n-butanol production which combines a fermentation consuming carbon dioxide (succinic acid fermentation) with subsequent catalytic reduction steps to add hydrogen to form butanol. Process simulations...
2014 / Robert Nilsson, Fredric Bauer, Sennai Mesfun, Christian Hulteberg, Joakim Lundgren, et al. -
Effects of oxygen enriched combustion on pollution and performance characteristics of a diesel engine
Abstract Oxygen enriched combustion is one of the attractive combustion technologies to control pollution and improve combustion in diesel engines. An experimental test was conducted on a single cylinder direct injection diesel engine to study the...
2015 / P. Baskar, A. Senthilkumar -
Scale-up of the Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization Using Continuous Flow Processing2014 / Nenad Micic, Alan Young, Julien Rosselgong, Christian Hornung
-
In silico optimization for production of biomass and biofuel feedstocks from microalgae2014 / Philip Kenny, Kevin J. Flynn
-
Chemical Looping for Pre-combustion CO2 Capture — Performance and Cost Analysis
Abstract The objective of this paper is to compare the two technologies chemical looping combustion (CLC) for inherent CO2-capture, and Calcium looping-based (CaL) CO2-capture when applied to a coal-based IGCC power plant, in terms of system...
2013 / Hari C. Mantripragada, Edward S. Rubin -
Doosan Power Systems OxyCoal™ Burner Technology Development
Abstract A Doosan Power Systems 30MWth OxyCoal™ burner was designed, manufactured, installed, commissioned, tested and subsequently removed from the Oxyfuel Pilot Plant at Schwarze Pumpe, owned and operated by Vattenfall Europe Technology Research...
2013 / D.W. Sturgeon, J.W. Rogerson, G.J. Hesselmann -
Prediction model of flow duct constriction noise
Abstract The scaling law for aerodynamic dipole type of sound from constrictions in low speed flow ducts by Nelson and Morfey is revisited. A summary of earlier published results using this scaling law is presented together with some new data. Based ...
2014 / Oscar Kårekull, Gunilla Efraimsson, Mats Åbom -
The Effects of Organoclay on the Morphology and Balance Properties of an Immiscible Polypropylene/Natural Rubber Blend
Abstract The objective of this work is to study the effects of organoclay on the morphology and balance properties between strength and toughness of a blend based on polypropylene (PP) and natural rubber (NR). This nanocomposite blend (nanoblend)...
2013 / C. Bendjaouahdou, S. Bensaad -
Formation and Dissociation of Methane Hydrates from Seawater in Consolidated Sand: Mimicking Methane Hydrate Dynamics beneath the Seafloor2013 / Prasad Kerkar, Kristine Horvat, Devinder Mahajan, Keith Jones
-
Oxy-combustion CPU – From Pilots Towards Industrial-scale Demonstration
Abstract The CPU (Compression and Purification Unit) is used to capture, purify and compress the CO2 contained in oxy-combustion boiler flue gas. Therefore, it plays a key role in the oxy-combustion route for carbon capture and storage (CCS). Over...
2014 / Frederick Lockwood, Ludovic Granados, Mathieu Leclerc, Anne-Laure Lesort, Grégoire Beasse, et al. -
Numerical modeling of multilayer film coextrusion with experimental validation2014 / James Champion, M. Kieran Looney, Mark J.H. Simmons
-
Characterization of Biochar from Switchgrass Carbonization2014 / Samy Sadaka, Mahmoud Sharara, Amanda Ashworth, Patrick Keyser, Fred Allen, et al.