Chemical engineering topic list of research papers
-
Evaluating Stability of Aqueous Multiwalled Carbon Nanotube Nanofluids by Using Different Stabilizers2014 / Tun-Ping Teng, Yan-Bo Fang, Yu-Chun Hsu, Li Lin
-
The Effect of Salinity on Membrane Fouling Characteristics in an Intermittently Aerated Membrane Bioreactor2014 / Kang Xie, Siqing Xia, Jing Song, Jixiang Li, Liping Qiu, et al.
-
Catalytic Technologies for Biodiesel Fuel Production and Utilization of Glycerol: A Review2012 / Le Tu Thanh, Kenji Okitsu, Luu Van Boi, Yasuaki Maeda
-
The oxycoal process with cryogenic oxygen supply2009 / Alfons Kather, Günter Scheffknecht
-
Kinetics of proton transfer in the zeolitic tuff2009 / Fehime Çakıcıoğlu-Özkan, İlker Polatoğlu
-
Computational Fluid Dynamics of Two-Opposed-Jet Microextractor2012 / Pritam V. Hule, B. N. Murthy, Channamallikarjun S. Mathpati
-
Ta/TiO2-and Nb/TiO2-Mixed Oxides as Efficient Solar Photocatalysts: Preparation, Characterization, and Photocatalytic Activity2012 / Hussein Znad, Ming H. Ang, Moses O. Tade
-
Nanostructural Materials for Energy Storage Systems2011 / Bronislaw Buczek
-
A review on research of fire dynamics in high-rise buildings
Abstract Since serious fire occurred frequently in recent years, fire safety of high-rise building hasattracted extensive attention. A National Basic Research Program (973 program) of China has been setup by Ministry of Science and Technology (MOST) ...
2013 / Jinhua Sun, Longhua Hu, Ying Zhang -
Reduced Chemical Kinetic Model for Titan Entries2011 / Romain Savajano, Raffaello Sobbia, Michele Gaffuri, Pénélope Leyland
-
Tridimensional Regression for Comparing and Mapping 3D Anatomical Structures2011 / Kendra K. Schmid, David B. Marx, Ashok Samal
-
Comparison of Methane Hydrate Formation in Stirred Reactor and Porous Media in the Presence of SDS
Abstract In this work, methane hydrate formation was compared between a stirred reactor and a fixed bed of porous media (silica sand) in the presence of sodium dodecyl sulfate (SDS). The experiments were carried out in batch operation and at 7.0MPa...
2015 / Dong-Liang Zhong, Shuang-Yi He, Dong-Jun Sun, Chen Yang -
Pervaporative desulfurization of gasoline – separation of thiophene/n-heptane mixture / Perwaporacyjne odsiarczanie benzyny – separacja mieszanin tiofen/n-heptan2015 / Katarzyna Rychlewska, Krystyna Konieczny, Michał Bodzek
-
Liquid Perfluorochemicals as Flexible and Efficient Gas Carriers Applied in Bioprocess Engineering: An Updated Overview and Future Prospects2014 / Maciej Pilarek
-
Adapting Data Processing To Compare Model and Experiment Accurately: A Discrete Element Model and Magnetic Resonance Measurements of a 3D Cylindrical Fluidized Bed2013 / Christopher M. Boyce, Daniel J. Holland, Stuart A. Scott, John S. Dennis
-
Dynamics of liquid drop spreading in metal-metal systems
Abstract This paper analyses the observed spreading kinetics of drops of a Ni-11P braze and of copper on metal substrates. The observed spreading rates were initially fast but decreased progressively in accord with the de Gennes model in which a...
2003 / J.C. Ambrose, M.G. Nicholas, A.M. Stoneham -
Performance of polyethyleneimine–silica adsorbent for post-combustion CO2 capture in a bubbling fluidized bed
Abstract The high performance of polyethyleneimine (PEI)-based solid adsorbent for CO2 capture has been well recognized in thermogravimetric analysis (TGA) and small-scale fixed bed reactors through the measurements of their equilibrium capacities...
2014 / Wenbin Zhang, Hao Liu, Chenggong Sun, Trevor C. Drage, Colin E. Snape -
Combining mercury thermoporometry with integrated gas sorption and mercury porosimetry to improve accuracy of pore-size distributions for disordered solids
Abstract The typical approach to analysing raw data, from common pore characterization methods such as gas sorption and mercury porosimetry, to obtain pore size distributions for disordered porous solids generally makes several critical assumptions...
2014 / Buhari Bafarawa, Artjom Nepryahin, Lu Ji, Elizabeth M. Holt, Jiawei Wang, et al. -
The effect of melt viscosity on thermal efficiency for single screw extrusion of HDPE
Abstract In this work, a highly instrumented single screw extruder has been used to study the effect of polymer rheology on the thermal efficiency of the extrusion process. Three different molecular weight grades of high density polyethylene (HDPE)...
2014 / Javier Vera-Sorroche, Adrian L. Kelly, Elaine C. Brown, Tim Gough, Chamil Abeykoon, et al. -
Evaluation of Pipe Wall Thickness based on Contrast Measurement Using Computed Radiography (CR)
Abstract Specific properties of imaging plates, like wide dynamic range and greater sensitivity to radiation dose compared to radiographic film, as well as possibility of computer assisted analysis of digital radiographic image make computed...
2014 / Marko Rakvin, Damir Markučič, Boris Hižman