Chemical engineering topic list of research papers
-
An Improved CO2 Separation and Purification System Based on Cryogenic Separation and Distillation Theory2014 / Gang Xu, Feifei Liang, Yongping Yang, Yue Hu, Kai Zhang, et al.
-
Total Site Heat Integration Considering Pressure Drops2015 / Kew Chew, Jiří Klemeš, Sharifah Alwi, Zainuddin Manan, Andrea Reverberi
-
A new viscoelastic benchmark flow: Stationary bifurcation in a cross-slot
Abstract In this work we propose the cross-slot geometry as a candidate for a numerical benchmark flow problem for viscoelastic fluids. Extensive data of quantified accuracy is provided, obtained via Richardson extrapolation to the limit of infinite ...
2014 / F.A. Cruz, R.J. Poole, A.M. Afonso, F.T. Pinho, P.J. Oliveira, et al. -
General formulas for drag coefficient and settling velocity of sphere based on theoretical law
Abstract The settlement of particles is of great importance in many areas. The accurate determination of drag coefficient and settling velocity in wide Reynolds number (Re) range remains a problem. In this paper, a series of new formulas for drag...
2015 / Hongli Yang, Minqiang Fan, Airong Liu, Lianping Dong -
Large-eddy simulation of pulverized coal jet flame – Effect of oxygen concentration on NOx formation
Abstract Large-eddy simulation is applied to a laboratory-scale open-type pulverized coal flame generated by a triple stream burner, and the NO production and reduction in oxy-fuel condition are investigated for the first time. Pulverized Cerrejon...
2014 / Masaya Muto, Hiroaki Watanabe, Ryoichi Kurose, Satoru Komori, Saravanan Balusamy, et al. -
Oscillation and heat transfer in upward laminar impinging jet flows
Abstract Upward, laminar, axisymmetric, pipe-issued, submerged impinging jets, with the water as the working fluid, are numerically investigated. The impingement surface is subjected to heating, which causes the wall jet to prematurely separate from ...
2014 / Chandra Shekhar, Koichi Nishino -
Electrified viscous thin film flow over topography2008 / D. TSELUIKO, M. G. BLYTH, D. T. PAPAGEORGIOU, J.-M. VANDEN-BROECK
-
A Comparative Analysis of the Flow Properties between Two Alumina-Based Dry Powders2013 / Milene Minniti de Campos, Maria do Carmo Ferreira
-
Influence of Sorbent Characteristics on Fouling and Deposition in Circulating Fluid Bed Boilers Firing High Sulfur Indian Lignite2013 / Selvakumaran Palaniswamy, M. Rajavel, A. Leela Vinodhan, B. Ravi Kumar, A. Lawrence, et al.
-
State Estimation and Model-Based Control of a Pilot Anaerobic Digestion Reactor2014 / Finn Haugen, Rune Bakke, Bernt Lie
-
Experimental Study and Numerical Solution of Poly Acrylic Acid Supported Magnetite Nanoparticles Transport in a One-Dimensional Porous Media2014 / M. Golzar, S. F. Saghravani, M. Azhdari Moghaddam
-
Establishment, morphology and properties of carbon nanotube networks in polymer melts
Abstract As for nanofillers in general, the properties of carbon nanotube (CNT) -polymer composites depend strongly on the filler arrangement and the structure of the filler network. This article reviews our actual understanding of the relation...
2011 / Ingo Alig, Petra Pötschke, Dirk Lellinger, Tetyana Skipa, Sven Pegel, et al. -
Effect of Na-chloride on the bioleaching of a chalcopyrite concentrate in shake flasks and stirred tank bioreactors
Abstract Oxidative dissolution of chalcopyrite at ambient temperatures is generally slow and subject to passivation, posing a major challenge for developing bioleaching applications for this recalcitrant mineral. Chloride is known to enhance the...
2013 / Denise Bevilaqua, Heidi Lahti, Patrícia H. Suegama, Oswaldo Garcia, Assis V. Benedetti, et al. -
Non-encapsulated thermo-liquid crystals for digital particle tracking thermography/velocimetry in microfluidics2012 / Rodrigo Segura, Christian Cierpka, Massimiliano Rossi, Sonja Joseph, Heike Bunjes, et al.
-
Process Modeling and Thermochemical Experimental Analysis of a Solar Sulfur Ammonia Hydrogen Production Cycle
Abstract A solar thermochemical water-splitting cycle which utilizes the electrolytic oxidation of aqueous ammonium sulfite as the hydrogen production half cycle, and an all-liquid potassium sulfate/potassium pyrosulfate salt solution for the oxygen ...
2012 / Jesse Littlefield, Mimi Wang, Lloyd C. Brown, Richard K. Herz, Jan B. Talbot -
A model for liquid phase sintering
Abstract A quantitative model for liquid phase sintering is developed based on the following ideas. During heating a liquid phase forms, which is easily mobile, wets the solid particles completely, dissolves solid atoms and provides an easy...
2002 / J. Svoboda, H. Riedel, R. Gaebel -
Mathematical Modeling of Multicomponent Mass Diffusion in Porous Pellets: Mass and Molar Formulations
Abstract Heterogeneous catalysis is of outermost significance in many fields of gas conversion and processing in chemical industries. Accurate modeling of intra-particle heat and mass transport is a prerequisite for the design of many industrial...
2012 / Jannike Solsvik, Hugo A. Jakobsen -
Comparing cellular performance of Yarrowia lipolytica during growth on glucose and glycerol in submerged cultivations2013 / Mhairi Workman, Philippe Holt, Jette Thykaer
-
The Effects of Ammonia Loading on the Nitrification Kinetics of Aerobic Baffled Continuous Biological Reactor
Abstract The discharge limit of ammonia-nitrogen in the domestic effluent is typically subjected to the local, state and federal regulations and standards. Thus, nutrients removal forms an essential operation of domestic sewage treatment. However,...
2011 / S.R.M. Kutty, M.H. Isa, L.C. Leong -
Yara Hemihydrate (HH) and Hemidihydrate (HDH) Processes for Phosphoric Acid Production
Abstract Yara own, operate and license fertiliser plants and technologies throughout the world. Phosphoric acid production is an important part of the Yara licensing portfolio. Formerly known as Hydro Agri and prior to that, Fisons, we have...
2012 / John M. Gobbitt