Chemical engineering topic list of research papers
-
Biodegradation of the High Explosive Hexanitrohexaazaiso-wurtzitane (CL-20)2009 / Pelin Karakaya, Christos Christodoulatos, Agamemnon Koutsospyros, Wendy Balas, Steve Nicolich, et al.
-
Predictions of Storage Modulus of Glass Bead-Filled Low-Density-Polyethylene Composites2012 / Ji-Zhao Liang
-
Application of Heterogeneous Catalysis in Small-Scale Biomass Combustion Systems2012 / René Bindig, Saad Butt, Ingo Hartmann, Mirjam Matthes, Christian Thiel
-
An experimental study of asphaltene particle sizes in n-heptane-toluene mixtures by light scattering2005 / K. Rajagopal, S. M. C. Silva
-
Microfluidic Devices: Useful Tools for Bioprocess Intensification2011 / Marco P.C. Marques, Pedro Fernandes
-
Multi-tests for pore structure characterization-A case study using lamprophyre2017 / Zhen Li, Guorui Feng, Yi Luo, Shengyong Hu, Tingye Qi, et al.
-
Limits of Risk Predictability in a Cascading Alternating Renewal Process Model2017 / Xin Lin, Alaa Moussawi, Gyorgy Korniss, Jonathan Z. Bakdash, Boleslaw K. Szymanski
-
Viscoelastic flow simulations in random porous media
Abstract We investigate creeping flow of a viscoelastic fluid through a three dimensional random porous medium using computational fluid dynamics. The simulations are performed using a finite volume methodology with a staggered grid. The no slip...
2017 / S. De, J.A.M. Kuipers, E.A.J.F. Peters, J.T. Padding -
Numerical investigation towards HiTAC conditions in laboratory-scale ethanol spray combustion
Abstract In the past 25years high temperature air combustion (HiTAC) technology has been proved and utilized in industry as a promising way to increase thermal efficiency, create a relatively uniform temperature distribution, and reduce emissions of ...
2017 / Shanglong Zhu, Artur Pozarlik, Dirk Roekaerts, Hugo Correia Rodrigues, Theo van der Meer -
Study on mathematical model to predict aerated power consumption in a gas-liquid stirred tank
Abstract The aerated power consumption characteristics in a transparent tank with diameter of 0.3 m and flat bottom stirred by a Rushton impeller were investigated by means of experimental measurement. The test fluid used was tap water as liquid and ...
2017 / Deyu Luan, Shengfeng Zhang, Xing Wei, Yiming Chen -
Experimental characterisation of a diesel engine running on polypropylene oils produced at different pyrolysis temperatures
Abstract Polypropylene is the most common type of plastic found in municipal solid waste. The production of polypropylene is expected to increase due to the widespread utilization in daily life, resulting in even higher amounts of polypropylene...
2017 / Ioannis Kalargaris, Guohong Tian, Sai Gu -
Investigation of double diffusion Cattaneo-Christov model in mixed convection flow by variable thickness surface
Abstract This investigation examines the characteristics of nonlinear mixed convection flow by stretching sheet with variable thickness. Double diffusion Cattaneo-Christov heat flux model is implemented. Temperature dependent thermal conductivity is ...
2017 / Tasawar Hayat, Zeenat Bashir, Sumaira Qayyum, Ahmed Alsaedi -
Nonpremixed and premixed flamelets LES of partially premixed spray flames using a two-phase transport equation of progress variable
Abstract Partially premixed spray flames are simulated with flamelet-based tabulated chemistry parameterized by the mixture fraction and progress variable. The transport equation of the reaction progress variable C is reconsidered, and its...
2017 / Yong Hu, Ryoichi Kurose -
Computational fluid dynamics modelling of residence times in vegetated stormwater ponds2017 / Fred Sonnenwald, Ian Guymer, Virginia Stovin
-
Experimental and Theoretical Analysis of Ink Dispersion Stability for Polymer Electrolyte Fuel Cell Applications2017 / S. Shukla, S. Bhattacharjee, A. Z. Weber, M. Secanell
-
Multi-Layered Effects of Fe on EMI Shielding of Sn-Al Hotel Architectural Powder2016 / Fei-Shuo Hung
-
Application of nanofiltration membranes for removal of surfactants from water solutions2017 / Izabela Kowalska, Aleksandra Klimonda
-
Efficiency of Active Flow Control by a Synthetic Jet Around a Hump2013 / P. Pick, V. Skála, M. Matějka
-
Increasing the carbon capture efficiency of the Ca/Cu looping process for power production with advanced process schemes
Abstract The Ca-Cu process is a novel concept for hydrogen production with inherent CO2 capture that has received great attention in the last years as potential low-CO2 emission technology for power generation and hydrogen production from natural...
2017 / M. Martini, I. Martínez, M.C. Romano, P. Chiesa, F. Gallucci, et al. -
Biomethanation and microbial community changes in a digester treating sludge from a brackish aquaculture recirculation system
Abstract Using a high-salinity-adapted inoculum and a moderate stepwise-increased organic loading rate (OLR), a stable digester performance was achieved in treating sludge from a brackish aquaculture recirculation system. The specific methane yield...
2016 / Xuedong Zhang, Yu Tao, Jianmei Hu, Gang Liu, Henri Spanjers, et al.