Chemical engineering topic list of research papers
-
A Green Method for Processing Polymers using Dense Gas Technology2010 / Roshan B. Yoganathan, Raffaella Mammucari, Neil R. Foster
-
Effect of Acid- and Ultraviolet/Ozonolysis-Treated MWCNTs on the Electrical and Mechanical Properties of Epoxy Nanocomposites as Bipolar Plate Applications2013 / Nishata Royan Rajendran Royan, Abu Bakar Sulong, Jaafar Sahari, Hendra Suherman
-
Synthesis and Characterization of Graft Copolymer of Dextran and 2-Acrylamido-2-methylpropane Sulphonic Acid2012 / Venkanna Azmeera, P. Adhikary, S. Krishnamoorthi
-
Numerical Simulations of Two-Phase Flow in a Dorr-Oliver Flotation Cell Model2013 / Abdel-Halim Salem-Said, Hassan Fayed, Saad Ragab
-
Markov Chain Models for the Stochastic Modeling of Pitting Corrosion2013 / A. Valor, F. Caleyo, L. Alfonso, J. C. Velázquez, J. M. Hallen
-
Grain size control in polycrystalline colloidal solids2002 / Thomas Palberg, Wolfgang Mönch, Jürgen Schwarz, Paul Leiderer
-
Research on the Gas Reburning in a Circulating Fluidized Bed (CFB) System Integrated with Biomass Gasification2012 / Xiaoying Hu, Tao Wang, Zhihui Dong, Hanfei Zhang, Changqing Dong
-
Dynamics of double emulsion break-up in three phase glass capillary microfluidic devices
Abstract Pinch-off of a compound jet in 3D glass capillary microfluidic device, which combines co-flowing and countercurrent flow focusing geometries, was investigated using an incompressible three-phase axisymmetric Volume of Fluid–Continuum...
2015 / Seyed Ali Nabavi, Sai Gu, Goran T. Vladisavljević, Ekanem E. Ekanem -
Mathematical Modeling and Performance Study of Fischer-tropsch Synthesis of Liquid Fuel over Cobalt-silica
Abstract A numerical one-dimensional pseudo-homogeneous mathematical model of a fixed bed reactor for Fischer-Tropsch (FT) synthesis was developed over a simulated nitrogen-rich syngas (33% hydrogen, 17% carbon monoxide and 50% nitrogen (volume...
2015 / Nima Moazami, Hamid Mahmoudi, Pooria Panahifar, Kiyarash Rahbar, Athanasios Tsolakis, et al. -
Novel full height pilot plant for solvent development and model validation
Abstract A novel full height pilot plant has recently been built at SINTEF in Trondheim, Norway. The plant is designed by SINTEF and is based on the experience from building and operating two smaller pilot plants and long term research on absorption ...
2011 / Thor Mejdell, Terje Vassbotn, Olav Juliussen, Andrew Tobiesen, Aslak Einbu, et al. -
Fixed Bed Adsorption Column Studies for the Removal of Aqueous Phenol from Activated Carbon Prepared from Sugarcane Bagasse
Abstract Fixed bed adsorption has become a frequently used industrial application in wastewater treatment processes. Various low cost adsorbents have been studied for their applicability in treatment of different types of effluents. In this study,...
2013 / H.D.S.S. Karunarathne, B.M.W.P.K. Amarasinghe -
Capturing CO2 from ambient air using a polyethyleneimine–silica adsorbent in fluidized beds
Abstract Carbon Capture and Storage (CCS) uses a combination of technologies to capture, transport and store carbon dioxide (CO2) emissions from large point sources such as coal or natural gas-fired power plants. Capturing CO2 from ambient air has...
2014 / Wenbin Zhang, Hao Liu, Chenggong Sun, Trevor C. Drage, Colin E. Snape -
Material and Energy Efficiency Analysis of Low Pressure Chemical Vapor Deposition of TiO2 Film
Abstract In this paper, Low Pressure Chemical Vapor Deposition (LPCVD) of TiO2 thin film process is chosen as the research object to study the material and energy consumptions in this process. The material and energy utilization efficiencies have...
2014 / Fenfen Wang, Nanjing Zhu, Tao Li, Hong-Chao Zhang -
Photosynthetic bioenergy utilizing CO2: an approach on flue gases utilization for third generation biofuels
Abstract One of the most important industrial activities related to the greenhouse gases emissions is the cement manufacturing process, which produces large amounts of carbon dioxide (CO2). Only in 2010, 8% of CO2 global emissions were due to cement ...
2014 / Sara P. Cuellar-Bermudez, Jonathan S. Garcia-Perez, Bruce E. Rittmann, Roberto Parra-Saldivar -
Project Status and Research Plans of 500 TPD CO2 Capture and Sequestration Demonstration at Alabama Power's Plant Barry
Abstract Southern Company and Mitsubishi Heavy Industries Ltd. (MHI) successfully started the world's largest (500 metric TPD) carbon capture plant MHI's KM-CDR® on a coal-fired power plant in June 2011 at Alabama Power's Plant Barry. The captured...
2013 / Michael A. Ivie Ii, Nick Irvin, Takuya Hirata, Hiromitsu Nagayasu, Takashi Kamijo, et al. -
Comparison of Fire Induced and Heat Driven Flows in Vertical Shafts
Abstract The Fire Dynamics Simulator (FDS) code is used to investigate fire induced and heat driven flows in typical shafts. Results of the fire induced and the heat driven flows in a shaft show good agreements with the experimental data. Then,...
2013 / Yincheng Guo, Lianyu Cao -
Experimental studies on the effect of water contaminants in convective boiling heat transfer
Abstract Experimental investigations on the influences of different contaminants to deionized water have been conducted under the sub-cooled flow boiling heat transfer inside the vertical annulus. Many experiments have been performed to investigate...
2014 / Mohammad Mohsen Sarafraz, Faramarz Hormozi -
A new concept of auxiliary fuel injection through tuyeres in blast furnaces developed by numerical simulations
Abstract The Injection of powdered materials in blast furnaces is a great option for reducing costs, increasing productivity and satisfy the environmental norms. Thus, this paper presents a study on the use of a flame stabilization system with...
2014 / Bruno Orlando de Almeida Santos, Breno Totti Maia, Fabricio Silveira Garajau, Marcelo de Souza Lima Guerra, Paulo Santos Assis, et al. -
Effect of temperature uncertainty on polymer electrolyte fuel cell performance
Abstract The temperature of operation is a key parameter in determining the performance and durability of a polymer electrolyte fuel cell (PEFC). Controlling temperature and understanding its distribution and dynamic response is vital for effective...
2013 / Mozhdeh Noorkami, James B. Robinson, Quentin Meyer, Oluwamayowa A. Obeisun, Eric S. Fraga, et al. -
Laboratory Rig for Atmospheric CO2 Absorption and Desorption under Pressure
Abstract An absorption and desorption rig has been built at Telemark University College. The absorption column has a structured packing height of 1500mm, a total height of 2500mm and an inner diameter of 100mm. The desorption column has a random...
2013 / Lars Erik Øi, Joachim Lundberg, Morten Pedersen, Per Morten Hansen, Morten Christian Melaaen