Chemical engineering topic list of research papers
-
Determining the Limiting Current Density of Vanadium Redox Flow Batteries2014 / Jen-Yu Chen, Chin-Lung Hsieh, Ning-Yih Hsu, Yi-Sin Chou, Yong-Song Chen
-
LCA Study of Oleaginous Bioenergy Chains in a Mediterranean Environment2014 / Daniele Cocco, Paola Deligios, Luigi Ledda, Leonardo Sulas, Adriana Virdis, et al.
-
Prediction and Measurement of the local extinction coefficient in sprays for 3D simulation/experiment data comparison
Abstract In the recent years, large progresses in laser imaging techniques have allowed to extract spatially resolved 2D and 3D quantitative spray information even in optically dense situations. The main breakthrough of these techniques is the...
2015 / H. Grosshans, E. Kristensson, R.-Z. Szász, E. Berrocal -
Gas to liquid mass transfer in rheologically complex fluids
Abstract The increase of studies relaying on gas to liquid mass transfer in digested sludge (shear thinning fluid) necessitates a better understanding of the impact of apparent viscosity (μa ) and rheology in process...
2015 / Y. Bajón Fernández, E. Cartmell, A. Soares, E. McAdam, P. Vale, et al. -
Analysis and optimal design of membrane-based CO2 capture processes for coal and natural gas-derived flue gas
Abstract Membrane-based processes for carbon capture and storage have many compelling advantages that have encouraged development of membrane materials for the post-combustion separation of CO2 from flue gases. We investigated the performance of two ...
2014 / Joseph A. Swisher, Abhoyjit S. Bhown -
Review and classification of recent observers applied in chemical process systems
Abstract Observers are computational algorithms designed to estimate unmeasured state variables due to the lack of appropriate estimating devices or to replace high-priced sensors in a plant. It is always important to estimate those states prior to...
2015 / Jarinah Mohd Ali, N. Ha Hoang, M.A. Hussain, Denis Dochain -
Focusing and Sorting of Particles in Spiral Microfluidic Channels
Abstract We present a microfluidic device for focusing and separation applications of large particles exploiting inertial migration in curved microchannels. Due to the curvilinear geometry of the microchannel particles experience a combination of...
2012 / A. El Hasni, K. Göbbels, A.L. Thiebes, P. Bräunig, W. Mokwa, et al. -
Study of biodegradability for municipal and industrial Tunisian wastewater by respirometric technique and batch reactor test
Abstract The aim of this work is to characterize biodegradability of Tunisian wastewater samples collected from a conventional, an extended aeration type activated sludge, and an industrial wastewater treatment plants (dairy, slaughter house and...
2016 / Cherif Hayet, Ben-Alaya Saida, Touhami Youssef, Shayeb Hédi -
“Bubble Bunch” phenomenon in operation of a bubble column2009 / Dariush Bastani, Ali Baghaei, Amir Sarrafi
-
A Comparison Between Monolithic and Wire Gauze Structured Catalytic Reactors for CH4 and CO Removal from Biogas-Fuelled Engine Exhaust2013 / P. J. Jodłowski, R. Gołąb, J. Kryca, A. Kołodziej, M. Iwaniszyn, et al.
-
The inactivation of Bacillus subtilis spores at low concentrations of hydrogen peroxide vapour
Abstract Spores of the bacterium Bacillus subtilis were deposited onto the surface of membranes by a process of filtration and exposed to concentrations of hydrogen peroxide vapour between 10 and 90mg/m3 (ppm) for times ranging from 1.5 to 48h. The...
2012 / D.J. Malik, C.M. Shaw, C.D. Rielly, G. Shama -
Release Kinetics of Ba and Pb Contained in WPCBs During the Traditional Hydrometallurgical Process
Abstract The release kinetics of heavy metals (Ba and Pb) contained in WPCBs, during the traditional hydrometallurgical process, were investigated in this study. The effects of different conditions, i.e. particle size, solid/liquid ratio, amount of...
2012 / Jinxiu Huang, Mengjun Chen, Haiyan Chen, Quan Sun -
Oxidant Multi-Injection in Supercritical Water Oxidation of Wastewaters
Abstract Supercritical Water Oxidation (SCWO) process with oxidant multi-injection was studied in a continuous flow system where the same amount of oxidant feed is split between two points, a first injection at inlet of reactor and a second one...
2012 / M.B. García-Jarana, V. Vadillo, J.R. Portela, J. Sánchez-Oneto, E.J. Martínez de la Ossa, et al. -
Identification of formation stages in a polymeric foam customised by sonication via electrical resistivity measurements2008 / C. Torres-Sánchez, J. Corney
-
Influence of the Use of Pure Oxygen or Air to Supply the Aerobic Conditions in Membrane Bioreactor in the Recovery of Permeability of the Membrane2012 / F.A. Rodríguez, J. Martín-Pascual, J.J. Garcia-Mesa, J. González-López, E. Hontoria, et al.
-
Retention Properties of Microfiltration Membranes: Towards a Better Characterization2012 / C. Barbé, K. Drouet, C. Robert, E. Gaudichet-Maurin, S. Logette
-
Integration of pulp and paper technology with bioethanol production2013 / Richard B Phillips, Hasan Jameel, Hou Min Chang
-
Bacterial bioaugmentation for improving methane and hydrogen production from microalgae2013 / Fan Lü, Jiaqi Ji, Liming Shao, Pinjing He
-
Characteristics of Dicesium Plutonium(IV) Nitrate Formation in Separation System of Uranyl Nitrate Hexahydrate Crystal
Abstract There is a concerned that Cs and Pu double salt Cs2Pu(NO3)6 is formed under certain conditions in the course of U crystallization. The influence of the Cs concentration in a feed solution on Cs2Pu(NO3)6 formation was thus examined in the U...
2012 / Masaumi Nakahara, Kimihiko Yano, Atsuhiro Shibata, Masayuki Takeuchi, Masanori Okano, et al. -
Accurate screening of amines by the Wetted Wall Column
Abstract To screen amine solvents accurately for CO2 capture, a Wetted Wall Column (WWC) was used to measure equilibrium CO2 partial pressure and CO2 absorption/desorption rate at variable CO2 loading from 40 to 100 °C. The solvents included 10 m...
2011 / Xi Chen, Fred Closmann, Gary T. Rochelle