Chemical engineering topic list of research papers
-
Ceria promotion over Ni-containing hydrotalcite-derived catalysts for CO2 methane reforming2017 / Radosław Dębek, Monika Motak, Maria E. Galvez-Parruca, Teresa Grzybek, Patrick Da Costa, et al.
-
Gasification and pyrolysis of different biomasses in lab scale system: A comparative study2016 / W. Gądek, M. Mlonka-Mędrala, M. Prestipino, P. Evangelopoulos, S. Kalisz, et al.
-
Oil and grease (O&G) removal from commercial kitchen waste water using carbonised grass as a key media2016 / Siti Nazahiyah Rahmat, Ahmad Zurisman Mohd Ali, Mohd Haziman Wan Ibrahim, Nur Azrena Alias
-
Assessment of Global Void Fraction in a Gas-liquid Stirred Vessel by Digital Image Processing
Abstract The main goal of the study presented in this paper is to propose a non-invasive method based on digital image processing to assess the global void fraction for both the vortex and the air bubbles that form in a gas-liquid stirred vessel....
2017 / Andrei Dragomirescu, Irina Pincovschi, Maria Miu -
Simulation and Optimization of Strengthening the Gas-Liquid Mass Transfer Structure in Tray Column2015 / Jihai Duan, He Hou, Huawei Sun, Zisheng Zhang
-
Separation of copper flotation concentrates into density fractions by means of polytungstate aqueous solution2016 / Andrzej Luszczkiewicz, Piotr Karwowski, Antoni Muszer, Jan Drzymala
-
Pretreatment methods of lignocellulosic biomass for anaerobic digestion2017 / Farrukh Raza Amin, Habiba Khalid, Han Zhang, Sajid u Rahman, Ruihong Zhang, et al.
-
Physical-Mathematical Model for Fixed-Bed Solid Fuel Gasification Process Simulation2016 / Konstantin V. Slyusarskiy, Alexander G. Korotkikh, Ivan V. Sorokin
-
High-temperature ethanol production using thermotolerant yeast newly isolated from Greater Mekong Subregion2017 / Atiya Techaparin, Pornthap Thanonkeo, Preekamol Klanrit
-
Design and evaluation of the thermal capability to secure a working time of cryogenic explosion-proof camera in LNG carrier tank2017 / Geun-Il Kang, Si-Young Kwak, Chun-Seong Park
-
The Experimental Study of the Effect of Adding High-Molecular Polymers on Heat Transfer Characteristics of Nanofluids2016 / Dmitriy Guzei, Maxim Pryazhnikov, Andrey Minakov, Vladimir Zhigarev
-
Investigation of baffle configuration effect on the performance of exhaust mufflers
Abstract Using baffles in exhaust mufflers is known to improve their transmission loss. The baffle cut ratio should affect the muffler performance analogous to a shell-and-tube heat exchanger. To the authors’ knowledge, there is no previous...
2017 / Ahmed Elsayed, Christophe Bastien, Steve Jones, Jesper Christensen, Humberto Medina, et al. -
Impact of asymmetric lamp positioning on the performance of a closed-conduit UV reactor
Abstract Computational fluid dynamics (CFD) analyses for the performance improvement of a closed-conduit ultraviolet (UV) reactor were performed by changing the lamp positions from symmetric to asymmetric. The asymmetric lamp positioning can be...
2017 / Tipu Sultan, Zeshan Ahmad, Zahid Anwar, Muhammad Shahzad Khurram -
Heterogeneous length of stay of hosts’ movements and spatial epidemic spread2012 / Chiara Poletto, Michele Tizzoni, Vittoria Colizza
-
Influence of NO x and Air on the Ageing Behaviour of MoDTC2017 / A. Ponjavic, T. Lemaigre, M. Southby, H. A. Spikes
-
Analysis of the secondary circuit of the DEMO fusion power plant using GateCycle
Abstract Conceptual activities on the DEMO fusion power plant design are progressing in Europe under the lead of the EUROfusion Consortium. According to the current EU DEMO plant design, the Primary Heat Transfer System (PHTS) transfers heat from...
2017 / Leszek Malinowski, Monika Lewandowska, Fabio Giannetti -
MHD boundary layer thermal slip flow by nonlinearly stretching cylinder with suction/blowing and radiation
Abstract A mathematical model has been developed to study the magnetohydrodynamic (MHD) flow of viscous fluid due to a nonlinear stretching cylinder. The flow is discussed in the presence of velocity and thermal slip conditions. Effects of viscous...
2017 / Muhammad Ijaz Khan, Muhammad Tamoor, Tasawar Hayat, Ahmed Alsaedi -
The use of carbon dioxide in microbial electrosynthesis: Advancements, sustainability and economic feasibility
Abstract This study examines the latest advancements in the field of Microbial ElectroSynthesis (MES) and reports a unique sustainability and economic assessment for the production of five alternative compounds (formic, acetic, propionic acids;...
2017 / Xenia Christodoulou, Tobechi Okoroafor, Simon Parry, Sharon B. Velasquez-Orta -
Special Features of Internal Surfaces Cleaning Processes Control in Pipelines and Units of Hydro-fuel Systems
Abstract In this article we have considered special features of efficiency control of different technical processes of internal surfaces cleaning in pipelines and units of aircraft fluid systems. We have considered hydro-mechanical, hydro-dynamic...
2017 / Valery I. Sanchugov, Victor M. Reshetov -
Drag reduction behavior of hydrolyzed polyacrylamide/xanthan gum mixed polymer solutions2017 / Mehdi Habibpour, Peter E. Clark