Chemical engineering topic list of research papers
-
A comparative study between stirred dead end and circular flow in microfiltration of China clay suspensions2016 / N. Shamsuddin, C. Cao, V. M. Starov, D. B. Das
-
Leakage Management: WDNetXL Pressure Control Module
Abstract A WDNetXL Pressure Control module to support planning and real-time functioning analysis of Remote Real Time Control (RRTC) devices is here presented. RRTC devices allow the optimal background leakage reduction by maintaining a constant...
2015 / Orazio Giustolisi, Alberto Campisano, Rita Ugarelli, Daniele Laucelli, Luigi Berardi -
Analysis of the Liquid Flow in a Vessel with a Rotating Disk at the Liquid Surface2014 / Witold Suchecki
-
Increasing performance and stability of mass-manufacturable biobatteries by ink modification
Abstract In this work, biobatteries assembled using roll-to-roll screen printed enzymatic electrodes were characterised in terms of their electrical performance and storage stability. The enzymes and mediators used on the anode and cathode were...
2015 / Saara Tuurala, Tanja Kallio, Maria Smolander, Mikael Bergelin -
Thermodynamic Evaluation of Repowering Options for a Small-size Combined Cycle with Concentrating Solar Power Technology
Abstract The increasing penetration of low-carbon technologies and enhancements in fossil-fuelled power plants efficiency are some of the most important and up to date research topics. Renewable energy, in particular solar, has the ...
2015 / M.A. Ancona, M. Bianchi, L. Branchini, A. De Pascale, F. Melino, et al. -
Study on the Structure Optimization and the Operation Scheme Design of a Double-Tube Once-Through Steam Generator
Abstract A double-tube once-through steam generator (DOTSG) consisting of an outer straight tube and an inner helical tube is studied in this work. First, the structure of the DOTSG is optimized by considering two different objective functions. The...
2016 / Xinyu Wei, Shifa Wu, Pengfei Wang, Fuyu Zhao -
An experimental study on the rate and mechanism of capillary rise in sandstone2016 / Yuya Tsunazawa, Tadashi Yokoyama, Naoki Nishiyama
-
Modeling of Aqueous Urea Solution Injection with Characterization of Spray-wall Cooling Effect and Risk of Onset of Wall Wetting
Abstract The definition of a sufficiently resolved heat transfer model with spray cooling effect as a function of each droplet kinetic and thermal parameters is a key factor in the numerical simulation of aqueous urea (AUS) based Selective Catalytic ...
2015 / Lorenzo Nocivelli, Gianluca Montenegro, Yujun Liao, Panayotis Dimopoulos Eggenschwiler, John Campbell, et al. -
Heat-Integrated Liquid–Desorption Exchanger (HILDE) for CO2 Desorption
Abstract A novel type of separating heat exchanger, called a heat-integrated liquid−desorption exchanger (HILDE), applied to a typical CO2 desorption process, has been investigated both numerically and experimentally. Process simulations,...
2016 / L.V. van der Ham, P. Khakharia, E.L.V. Goetheer -
Voronoï analysis of bubbly flows via ultrafast X-ray tomographic imaging2016 / Yuk Man Lau, Karolin Müller, Salar Azizi, Markus Schubert
-
Engineering Scale-up Challenges, and Effects of SO2 on the Calcium Looping Cycle for Post Combustion CO2 Capture
Abstract Engineering scale-up challenges, and potential effects of SO2 on the calcium looping cycle for post combustion CO2 capture have been investigated in Cranfield University's pilot scale reactor (25 kWth). Following reactor and process...
2014 / Alissa Cotton, Kumar Patchigolla, John E. Oakey -
Photocatalytic Decomposition of Formaldehyde by Combination of Ozone and AC Network with UV365nm, UV254nm and UV254+185nm
Abstract Formaldehyde (HCHO) is one of the most common indoor pollutants. Long time exposure to the environment with HCHO concentration above 0.1mg/m3 can cause harm to human body. In order to remove HCHO efficiently, The TiO2/AC network film was...
2015 / M.Y. Wang, Y.W. Lu, F. Wu, X.J. Zhang, C.X. Yang -
A Layout for the Carbon Capture with Aqueous Ammonia without Salt Precipitation
Abstract Post-combustion carbon capture technologies seem to be necessary to realize the CO2 mitigation policies internationally shared for the next future, despite none of them appears to be ready for full-scale applications. This work considers...
2016 / Davide Bonalumi, Gianluca Valenti, Stefano Lillia, Philip L. Fosbøl, Kaj Thomsen -
The inertial subrange in turbulent pipe flow: centreline2016 / J. F. Morrison, M. Vallikivi, A. J. Smits
-
Model-based optimization of Scheffersomyces stipitis and Saccharomyces cerevisiae co-culture for efficient lignocellulosic ethanol production2015 / Pornkamol Unrean, Sutamat Khajeeram
-
Differential Molecular Diffusion in a Hydrogen-Rich Jet
Abstract Differential molecular diffusion effects are expected to be of particular importance in the combustion of hydrogen and H2-enriched fuels. The mixing between fuel and oxidizer can be significantly influenced, implying changed chemical...
2016 / Sigurd Sannan, Alan R. Kerstein -
Reynolds and froude number effect on the flow past an interface-piercing circular cylinder2015 / Bonguk Koo, Jianming Yang, Seong Mo Yeon, Frederick Stern
-
Synthetic Fuels from Electricity for the Swedish Transport Sector: Comparison of Well to Wheel Energy Efficiencies and Costs
Abstract Synthetic fuels based on electricity, water, and carbon dioxide (CO2) may be necessary to cover the fuel demand in a sustainable transport sector based on renewable energy sources. The aim of this paper is to compare hydrogen, methane,...
2015 / Mårten Larsson, Stefan Grönkvist, Per Alvfors -
Numerical investigation of flow past a row of rectangular rods
Abstract A numerical study of uniform flow past a row of rectangular rods with aspect ratio defined as R =width/height=0.5 is performed using the Lattice Boltzmann method. For this study the Reynolds number (Re) is fixed at 150, ...
2016 / S.Ul. Islam, H. Rahman, W.S. Abbasi, S.C. Saha, T. Shahina -
Investigation of a Hybrid System for Post-Combustion Capture
Abstract This paper investigates an approach for post-combustion CO2 capture from the pulverized coal power plant “Kleine Kopje” in North-Rheine Westphalia (NRK-NRW). The system combines a single polymer membrane and refrigeration distillation to...
2014 / Li Zhao, Eko Primabudi, Detlef Stolten