Chemical engineering topic list of research papers
-
Mathematical Modeling of Methane Combustion2012 / Milada Kozubková, Jaroslav Krutil, Marian Bojko, Václav Nevrlý
-
CO2 Biofixation and Growth Kinetics of Chlorella vulgaris and Nannochloropsis gaditana2016 / Michał Adamczyk, Janusz Lasek, Agnieszka Skawińska
-
Some Properties of Line and Column Operations on Matrices2008 / Xiquan Liang, Tao Sun, Dahai Hu
-
Pilot tests of CO2 capture in brick production industry using gas–liquid contact membranes2015 / D. Koutsonikolas, G. Pantoleontos, M. Mavroudi, S. Kaldis, A. Pagana, et al.
-
Simulation of Fluid Flow in Centrifugal Tricanter2013 / Cristian Puscasu, Mihaela Grigorescu, Ghita Axene, Raluca Voicu, Mariana Stefanescu, et al.
-
FIB-SEM Tomography Probes the Mesoscale Pore Space of an Individual Catalytic Cracking Particle2016 / D. A. Matthijs de Winter, Florian Meirer, Bert M. Weckhuysen
-
Nonlinear Dynamics of a Controlled Stirred Tank Bioreactor With Predator-Prey Relationship2014 / Bolesław Tabiś, Szymon Skoneczny, Wojciech S. Stryjewski
-
Thermal Characterization of Microwave Assisted Foaming of Expandable Polystyrene
Abstract Microwave range had been widely used for heating processes. In this work theoretical and experimental results on manufacturing of expandable polystyrene using specific frequencies of 2.45GHz are presented. Simulations of temperature...
2016 / Carlos Adrián Calles-Arriaga, Juan López-Hernández, Martín Hernández-Ordoñez, Rodolfo Arturo Echavarría-Solís, Víctor Manuel Ovando-Medina -
Steady fully developed natural convection flow in a vertical annular microchannel having temperature dependent viscosity: An exact solution
Abstract This study is devoted to investigate the steady fully developed natural convection flow in a vertical annular micro-channel having temperature dependent viscosity in the presence of velocity slip and temperature jump at the annular...
2016 / Basant K. Jha, Babatunde Aina, Zubairu Rilwanu -
Aerodynamic and aeroacoustic analyses of a submerged air inlet in a low-Mach-number flow
Abstract Computational aerodynamic and aeroacoustic analyses of a submerged air inlet are performed at a low Mach number. A hybrid method is used, in which the flow in the vicinity of the inlet is solved through detached eddy simulation (DES) and...
2016 / Nicolas J. Pignier, Ciarán J. O’Reilly, Susann Boij -
Effect of micropore size distribution on phenol adsorption on steam activated carbons2015 / Ewa Lorenc-Grabowska
-
Comparison of four outdoor pilot-scale photobioreactors2015 / Jeroen H. de Vree, Rouke Bosma, Marcel Janssen, Maria J. Barbosa, René H. Wijffels
-
Enhancement of the enzymatic hydrolysis of fines from recycled paper mill waste rejects2015 / Byeong C. Min, B. V. Bhayani, V. S. Jampana, B. V. Ramarao
-
Phenol adsorption on different nano-sized carbon materials: first comparative study2015 / Bartosz Kruszka, Marek Wiśniewski, Artur P. Terzyk
-
Use of Bio-methane for Auto Motive Application: Primary Energy Balance and Well to Wheel Analysis
Abstract To promote the development of sustainable energy systems, the biomass represents an interesting renewable source, due to its wide availability (often as waste to be disposed) and the versatility of the technologies and processes which can...
2015 / F. Zuccari, A. Santiangeli, A. Dell’Era, A. D’orazio, C. Fiori, et al. -
The morphology of Ganoderma lucidum mycelium in a repeated-batch fermentation for exopolysaccharide production
Abstract The morphology of Ganoderma lucidum BCCM 31549 mycelium in a repeated-batch fermentation (RBF) was studied for exopolysaccharide (EPS) production. RBF was optimised for time to replace and volume to replace. G. lucidum mycelium showed the...
2016 / Wan Abd Al Qadr Imad Wan-Mohtar, Safuan Ab Kadir, Nazamid Saari -
Bubble Detachment from a Steel Ball in Turbulent Field: Application to Mineral Flotation Systems
Abstract Coarse particle (typically more than 100 micrometers in diameter) flotation is adversely influenced by liquid motion resulting from energy input associated with mixing of the gas and solid phases. In particular, the collected particles can...
2015 / Guichao Wang, J.B. Joshi, Mayur Sathe, Graeme J. Jameson, Shenjie Zhou, et al. -
Facile isothermal solid acid catalyzed ionic liquid pretreatments to enhance the combined sugars production from Arundo donax Linn.2016 / Tingting You, Lupeng Shao, Ruizhen Wang, Liming Zhang, Feng Xu
-
Experimental Analysis of Rheological Behaviour of a Multi-base Energetic Material During Conventional Extrusion
Abstract The final quality to be achieved during conventional extrusion of energetic materials depends on diverse factors such as the material formulation, extrusion parameters, characteristics of raw materials and previous stages like mixing...
2015 / J. Martinez-Pastor, P. Franco, F.J. Ramirez, P.J. Lopez-Garcia -
Atomization mechanism of a charged viscoelastic liquid sheet
Abstract In order to study atomization mechanism of a viscoelastic liquid sheet in an electric field, the spatial–temporal stability analysis of a viscoelastic liquid sheet injected into a dielectric stationary ambient gas in the presence of a...
2015 / Lujia Liu, Yingjie Liu, Lipeng Lu