Chemical engineering topic list of research papers
-
Experimental and modelling studies on the uncatalysed thermal conversion of inulin to 5-hydroxymethylfurfural and levulinic acid2015 / B A Fachri, R M Abdilla, C B Rasrendra, H J Heeres
-
Visualization and measurement of separation positions around rotating dimpled ball
Abstract Flow fields around balls used for ball games have very complicated and interesting physics because most of the balls fly near critical Reynolds number. However, the mechanism of separation flow around a dimpled ball including boundary layer ...
2012 / Hyoungchol Kim, Masahide Onuki, Shotaro Kishibe, Ryou Tatani, Shoji Sakaue, et al. -
Development of Organic Solvent Nanofiltration Membranes for the Application in Extreme pH Conditions2012 / I.B. Valtcheva, S.C. Kumbharkar, J.F. Kim, L.G. Peeva, A.G. Livingston
-
Carbon Capture with 4 m Piperazine/4 m 2-Methylpiperazine
Abstract An equimolar diamine blend of 4 m 2-methylpiperazine (2MPZ) with 4 m piperazine (PZ) is shown to be an attractive solvent for CO2 capture. This blend overcomes the difficulties posed by the narrow solid solubility window of pure 8 m PZ...
2013 / Brent Sherman, Xi Chen, Thu Nguyen, Qing Xu, Humera Rafique, et al. -
Integration of Carbonation Process with Coal Fired Power Plant to Reduce CO2 Emissions
Abstract Global warming is a major issue for today's world due to continuous growth of greenhouse gas emissions. Carbon dioxide (CO2) is the major greenhouse gas which occupies approximately 55% of the total greenhouse gases. Coal fired power plants ...
2012 / S. Moazzem, M.G. Rasul, M.M.K. Khan -
Pilot-Scale Investigation of an Innovative Process for Biogas Upgrading with CO2 Capture and Storage
Abstract In this work an innovative carbon dioxide removal method that, differently from the currently employed commercial techniques, allows also to capture and store the separated CO2 is investigated. This process, Alkali absorption with...
2013 / Renato Baciocchi, Ennio Carnevale, Giulia Costa, Lidia Lombardi, Tommaso Olivieri, et al. -
[P1.028] Development of Nanocellulose/Polypyrrole Composites Towards Blood Purification2012 / D.O. Carlsson, G. Nystršm, N. Ferraz, L. Nyholm, A. Mihranyan, et al.
-
Chemical Transport in Undisturbed Soils Estimated Using Transfer Function Models
Abstract Assessment of chemical transport in vadose zone environments is critical for conserving the quality of groundwater. This project evaluated lognormal and convection-dispersion transfer function models with a conservative tracer through soil...
2013 / S.H. Anderson, Horng-Jer Shieh, R.L. Peyton -
Techno-economic Analysis of Biomass-fired ORC Systems for Single-family Combined Heat and Power (CHP) Applications
Abstract The aim of the paper is the investigation of the energetic performances and the economic feasibility of Organic Rankine Cycles (ORCs) for biomass single-family combined heat and power (CHP) generation. To this purpose, a parametric energy...
2014 / Angelo Algieri, Pietropaolo Morrone -
Preparation of TiO2 Membranes on Silicon Carbide Supports for Water Filtration Applications2012 / C.D. Madhusoodana, S.P. Manjunath, R.N. Das
-
Energy and Economic Analysis of the CO2 Capture from Flue Gas of Combined Cycle Power Plants
Abstract Carbon capture and storage is considered as one of the key strategies for reducing the emissions of carbon dioxide from power generation facilities. Although post-combustion capture via chemical absorption is now a mature technology, the...
2014 / Maura Vaccarelli, Roberto Carapellucci, Lorena Giordano -
A modelling study of the visco-elastic behaviour of polyester-based coil coatings
Abstract The time and temperature dependence of the mechanical response of a series of polyester-based hexa(methoxymethyl)melamine cross-linked coil coatings was investigated. Small strain experiments such as dynamic mechanical analysis and stress...
2013 / I. Giannakopoulos, A.C. Taylor -
Project Update of 500 TPD Demonstration Plant for Coal-fired Power Plant
Abstract Southern Company and MHI successfully started the world's largest 500 TPD carbon capture plant for a coal-fired power plant in June 2011 at Alabama Power's Plant Barry and achieved full load operation. These operation experience and lessons ...
2013 / Takuya Hirata, Hiromitsu Nagayasu, Takashi Kamijo, Yasuo Kubota, Tatsuya Tsujiuchi, et al. -
Syngas Upgrading by High Temperature WGS Reaction in a Single Stage Membrane Reactor2012 / A. Brunetti, A. Caravella, E. Drioli, G. Barbieri
-
Two-component laser anemometry measurements of non-reacting and reacting complex flows in a swirl-stabilized model combustor2004 / R. D. Brum, G. S. Samuelsen
-
Thermochemical hydrogen production from water using reducible oxide materials: a critical review2013 / Lawrence D’Souza
-
Impact of high biomass loading on ionic liquid pretreatment2013 / Alejandro G Cruz, Chessa Scullin, Chen Mu, Gang Cheng, Vitalie Stavila, et al.
-
High cell density media for Escherichia coli are generally designed for aerobic cultivations – consequences for large-scale bioprocesses and shake flask cultures2008 / Jaakko Soini, Kaisa Ukkonen, Peter Neubauer
-
Aerodynamic drag reduction of a simplified squareback vehicle using steady blowing2012 / R. P. Littlewood, M. A. Passmore
-
Process design and costing of an air-contactor for air-capture
Abstract Carbon Engineering (CE) has developed an air-contactor design, specifically optimized to the challenge of efficiently removing CO2 from atmospheric air. CE’s air-contactor design is based on the wet-scrubbing method, where air is brought...
2011 / Kenton Heidel, David Keith, Arvinder Singh, Geoff Holmes