Chemical engineering topic list of research papers
-
Optimization of Sulfide/Sulfite Pretreatment of Lignocellulosic Biomass for Lactic Acid Production2013 / Muhammad Idrees, Ahmad Adnan, Fahim Ashraf Qureshi
-
Computational Fluid Dynamics Modeling of Steam Condensation on Nuclear Containment Wall Surfaces Based on Semiempirical Generalized Correlations2012 / Pavan K. Sharma, B. Gera, R. K. Singh, K. K. Vaze
-
The Influence of the Packing Factor on the Fuel Temperature Hot Spots in a Particle-Bed GCFR2010 / G. Lomonaco, W. Grassi, N. Cerullo
-
Estimating Pore Space Hydrate Saturation Using Dissociation Gas Evolution Measurements: In Relevance to Laboratory Testing of Natural or Artificially Synthesised Hydrate-Bearing Soil Specimens2013 / Anuruddhika G. Jayasinghe, Jocelyn L. H. Grozic
-
Optimization of Nano-TiO𝟐 Photocatalytic Reactor for Organophosphorus Degradation2012 / Ilin Sadeghi, Pooya Arbab, Mahdi Fathizadeh, Hoseen Fakhraee, Mahdi Amrollahi
-
Preparation of NaTaO 3 by Spray Pyrolysis and Evaluation of Apparent Photocatalytic Activity for Hydrogen Production from Water2008 / Hyun Woo Kang, Eun-Jung Kim, Seung Bin Park
-
Hydrodynamic Cavitation-Assisted Synthesis of Nanocalcite2010 / Shirish H. Sonawane, Sarang P. Gumfekar, Kunal H. Kate, Satish P. Meshram, Kshitij J. Kunte, et al.
-
Evaluation of a newly isolated Klebsiella sp. DL-1 and its interaction with Klebsiella sp. FD-3 in regenerating nitrogen oxide scrubbing liquor using ethylenediaminetetraacetic acid iron(II) as absorbent
Abstract A highly effective strain, referred to as DL-1 and identified as Klebsiella sp., was applied to Fe(II)EDTA-NO reduction. The average reduction rate was approximately 4.29 mmolg DCW−1 h−1, which was higher than those...
2015 / Yi-xuan Liu, Bi-hong Lv, Guo-hua Jing, Tian-ming Lin, Zuo-ming Zhou -
A system to assess the stability of airborne nanoparticle agglomerates under aerodynamic shear
Abstract Stability of airborne nanoparticle agglomerates is important for occupational exposure and risk assessment in determining particle size distribution of nanomaterials. In this study, we developed an integrated method to test the stability of ...
2015 / Yaobo Ding, Michael Riediker -
RSAT™ process development for post-combustion CO2 capture: Scale-up from laboratory and pilot test data to commercial process design
Abstract It is believed that a RSAT™ (Regenerable Solvent Absorption Technology) process is the most viable nearterm technology for post-combustion CO2 capture from power plant flue gas. The Babcock & Wilcox Power Generation Group, Inc....
2011 / Ruyu Zhang, E. Purusha Bonnin-Nartker, George A. Farthing, Lei Ji, Michael G. Klidas, et al. -
Vertimill™ pilot scale tests simulated by perfect mixing model
Abstract Minas-Rio Project, Anglo American property, located in Brazil, considers Vertimill™ to make the particle size distribution adequate to feed slurry pipeline. A pilot test campaign was carried out at Metso's pilot plant facility located in...
2014 / Douglas Batista Mazzinghy, José Francisco Cabello Russo -
Determination of permissible industrial pollution load at a municipal wastewater treatment plant2014 / J. Mikosz
-
A New Heat Transfer Fluid for Concentrating Solar Systems: Particle Flow in Tubes
Abstract This paper demonstrates a new concept of heat transfer fluid (HTF) for CSP applications, developed in the frame of both a National and a European project (CSP2 FP7 project). It involves a dense suspension of small solid particles. This...
2014 / G. Flamant, D. Gauthier, H. Benoit, J.-L. Sans, B. Boissière, et al. -
An Innovative Small Sized Anaerobic Digester Integrated in Historic Building
Abstract The CRB - Biomass Research Centre of the University of Perugia has developed an innovative anaerobic batch plant for the biogas production consisting on polyethylene bags, conventionally used for agriculture silage storage, converted and...
2014 / Franco Cotana, Alessandro Petrozzi, Anna Laura Pisello, Valentina Coccia, Gianluca Cavalaglio, et al. -
Energy Efficiency Optimization in Water Distribution Systems
Abstract The evaluation of energy efficiency in water supply systems should account for both actual energy consumed and how efficiently such energy is spent. This work proposes the new concept of Unavoidable Minimum Energy, as the reference for...
2014 / A. Bolognesi, C. Bragalli, C. Lenzi, S. Artina -
Parameter Identification and Assessment of Nutrient Transporters in AM Symbiosis through Stochastic Simulations
Abstract This paper presents a methodology for identifying the kinetic parameters of a biological system and their relationships with the concentration variations of the species by means of in silico experiments. A nonlinear goal programming...
2013 / Eva Sciacca, Salvatore Spinella, Cristina Calcagno, Ferruccio Damiani, Mario Coppo -
The Air Products Vattenfall Oxyfuel CO2 Compression and Purification Pilot Plant at Schwarze Pumpe
Abstract Air Products has in the last couple of years been working with Vattenfall to realise the ambition of building the world's frist coplete pilot of the technology that would be use to purify the raw CO2 from a commercial-scale coal-fired...
2013 / Vince White, Andrew Wright, Stephanie Tappe, Jinying Yan -
Study on the spray and combustion characteristics of water–emulsified diesel
Abstract Emulsified fuel remains a potential solution to meet the increasingly stringent emission regulations for internal combustion engines due to its capability of simultaneously reducing NO x and...
2014 / Ming Huo, Shenlun Lin, Haifeng Liu, Chia-fon F. Lee -
Ignition and NO Emissions of Coal and Biomass Blends under Different Oxy-fuel Atmospheres
Abstract The effect of co-firing coal and biomass on the ignition behaviour and NO emissions was evaluated under both air and O2/CO2 (21-35% O2) atmospheres. The results showed a worsening of the ignition properties in the 21%O2/79%CO2 atmosphere in ...
2013 / J. Riaza, L. Álvarez, M.V. Gil, C. Pevida, J.J. Pis, et al. -
LES of turbulent liquid jet primary breakup in turbulent coaxial air flow
Abstract A robust two-phase flow Large Eddy Simulation (LES) algorithm has been developed and applied to predict the primary breakup of an axisymmetric water jet injected into a surrounding coaxial air flow. The high liquid/gas density and viscosity ...
2013 / F. Xiao, M. Dianat, J.J. McGuirk