Chemical engineering topic list of research papers
-
Distribution-Based Identification of Yield Coefficients in a Baker’s Yeast Bioprocess2012 / Dorin Sendrescu
-
Dust Explosion Prevention and Mitigation, Status and Developments in Basic Knowledge and in Practical Application2009 / Rolf K. Eckhoff
-
Synthesis and Characterization of Exfoliated Graphite/ABS Composites2012 / Bhardwaj Neha, K. S. Manjula, B. Srinivasulu, Shit C. Subhas
-
Electrical and Thermal Behavior of Copper-Epoxy Nanocomposites Prepared via Aqueous to Organic Phase Transfer Technique2012 / N. H. Mohd Hirmizi, M. Abu Bakar, W. L. Tan, N. H. H. Abu Bakar, J. Ismail, et al.
-
Influence of Ionic Liquid Structure on Supported Ionic Liquid Membranes Effectiveness in Carbon Dioxide/Methane Separation2013 / Iwona Cichowska-Kopczyńska, Monika Joskowska, Bartosz Dębski, Justyna Łuczak, Robert Aranowski
-
CVD Synthesis of Hierarchical 3D MWCNT/Carbon-Fiber Nanostructures2008 / Toma Susi, Albert G. Nasibulin, Hua Jiang, Esko I. Kauppinen
-
Lorenz Curves, Size Classification, and Dimensions of Bubble Size Distributions2009 / Sonja Sauerbrei
-
Exact and Approximate Stochastic Simulation of Intracellular Calcium Dynamics2011 / Nicolas Wieder, Rainer H. A. Fink, Frederic von Wegner
-
An Efficient Drift-Flux Closure Relationship to Estimate Liquid Holdups of Gas-Liquid Two-Phase Flow in Pipes2012 / Jinho Choi, Eduardo Pereyra, Cem Sarica, Changhyup Park, Joe Kang
-
Effects of Turbulent Reynolds Number on the Performance of Algebraic Flame Surface Density Models for Large Eddy Simulation in the Thin Reaction Zones Regime: A Direct Numerical Simulation Analysis2012 / Mohit Katragadda, Nilanjan Chakraborty, R. S. Cant
-
Auto-tuning Control Systems for Improved Operation of Continuous Fluidized Bed Spray Granulation Processes with External Product Classification
Abstract In this contribution control of continuous fluidized bed spray granulation processes with external product classification is studied. From a practical point of view control schemes being easy to implement and maintain using standard process ...
2015 / Stefan Palis, Christian Dreyschultze, Christoph Neugebauer, Achim Kienle -
Barrel swirl breakdown in spark-ignition engines: insights from particle image velocimetry measurements2002 / M Reeves, M J Haste, C P Garner, N A Halliwell
-
Life-Cycle Energy Use and Greenhouse Gas Emissions Analysis for Bio-Liquid Jet Fuel from Open Pond-Based Micro-Algae under China Conditions2013 / Xunmin Ou, Xiaoyu Yan, Xu Zhang, Xiliang Zhang
-
Iron Ore Pelletization Technology and its Environmental Impact Assessment in Eastern Region of India – A Case Study
Abstract Iron ore is primarily found as the oxides of iron, notably hematite and magnetite and as hydroxides like goethite and limonite. Small amounts are found as the carbonates in siderite, as sulphides in pyrites and as silicates in chamosite and ...
2015 / G.P. Singh, Sundeep, R.P. Choudhary, H. Vardhan, M. Aruna, et al. -
Decomposition Studies of Isopropanol in a Variable Pressure Flow Reactor2015 / Joshua S. Heyne, Stephen Dooley, Zeynep Serinyel, Frederick L. Dryer, Henry Curran
-
CO2 absorption with membrane contactors vs. packed absorbers-Challenges and opportunities in post combustion capture and natural gas sweetening
Abstract The present work presents a case study where membrane contactors are compared with absorption towers for post combustion CO2 capture and for natural gas sweetening. Simulations are performed using a absorber model which has been validated...
2013 / Karl Anders Hoff, Hallvard F. Svendsen -
Enzymatic biodiesel production kinetics using co-solvent and an anhydrous medium: a strategy to improve lipase performance in a semi-continuous reactor
Enzymatic biodiesel production kinetics under previously optimized conditions were investigated. Waste frying oil (WFO) was used as the raw material, Novozym 435 as catalyst, methanol as acyl acceptor and tert-butanol as co-solvent. To investigate pure...
2014 / Laura Azócar, Rodrigo Navia, Leticia Beroiz, David Jeison, Gustavo Ciudad -
Dry Degumming of Corn-oil for Biodiesel Using a Tubular Ceramic Membrane
Abstract Gum removal from vegetable oils applied for diesel fuel is an essential process, since the presence of gum in direct use to the diesel engine might cause plugging in the engine filters, lines and injectors. In the biodiesel production, the...
2014 / Yusuf Wibisono, Wahyunanto Agung Nugroho, Tsair-Wang Chung -
Modelling of operation of a lithium-air battery with ambient air and oxygen-selective membrane
Abstract A macro-homogeneous model has been developed to evaluate the impact of replacing pure oxygen with ambient air on the performance of a rechargeable non-aqueous Li-air battery. The model exhibits a significant reduction in discharge capacity, ...
2013 / Ukrit Sahapatsombut, Hua Cheng, Keith Scott -
A Numerical Solution Strategy for Dynamic Simulation of Post-combustion CO2 Capture
Abstract This paper describes in detail the numerical solution of a dynamic process developed for post-combustion absorption based CO2 capture. The method used in this work is sequential modular integration. This means that each process unit is...
2013 / Nina Enaasen, Andrew Tobiesen, Hanne M. Kvamsdal, Magne Hillestad