Chemical engineering topic list of research papers
-
Next Scale Chemical Looping Combustion: process Integration and Part Load Investigations for a 10MW Demonstration Unit
Abstract Chemical looping combustion (CLC) is a second generation carbon capture process and is discussed as a potential breakthrough technology with respect to CO2 avoidance costs. The potential of CLC has already been successfully demonstrated at...
2013 / Klemens Marx, Otmar Bertsch, Tobias Pröll, Hermann Hofbauer -
The Performance Improvement of a Thick Electrode Solid Oxide Fuel Cell
Abstract Solid oxide fuel cells (SOFCs) are becoming one of the main competitors among environmental friendly energy sources for the future due to low emission rates, high electrical generating efficiency and potential for low operating cost. This...
2013 / Penyarat Chinda -
A Dynamic Model for Glucose Fermentation in a Three-Phase Bioreactor
Abstract In this study the performance of an special three-phase bioreactor for biological production of ethanol and hydrogen was modeled using computational fluid dynamics. The effect of different Hydraulic Retention Time (HRT) of 1, 2 and 4 hr and ...
2013 / Leila Vafajoo, Behrooz Beigy -
Industrial Tofu Wastewater as a Cultivation Medium of Microalgae Chlorella vulgaris
Abstract Chlorella vulgaris have high lipid productivity as biodiesel source. Cultivation of C. vulgaris in this study using tofu wastewater in a 18-liters photobioreactor, 5 000 lux illumination, the pressure 1 atm and a...
2014 / Dianursanti, Baharudin Taufiq Rizkytata, Mohamad Teguh Gumelar, Taufik Hidayat Abdullah -
Induced effects of advanced oxidation processes2014 / Peng Liu, Chaolin Li, Zhuanjun Zhao, Gang Lu, Haibo Cui, et al.
-
Numerical Study of Chevron Jet Noise Using Parallel Flow Solver
Abstract Hybrid large-eddy type simulations for chevron nozzle jet flows are performed at Mach 0.9 and Re ∼ 106. Implicit or numerical large- eddy simulation (ILES or NLES) is employed, namely omitting explicit subgrid scale models. A...
2013 / Hao Xia -
Fluid Dynamics Optimization of a Novel Isothermal Adsorption Dehumidification System for Solar Driven Applications
Abstract To make adsorption dehumidification run on heat supply temperatures as low as 50°C, and allow an effective use of solar thermal collectors, a new system concept is developed. The aim is to achieve a quasi-isothermal adsorption of water...
2014 / Lorenzo Pistocchini, Silvia Garone, Mario Motta -
Development of an efficient statistical volumes of fluid-Lagrangian particle tracking coupling method2014 / H. Grosshans, R.-Z. Szász, L. Fuchs
-
On the breakup of an air bubble injected into a fully developed turbulent flow. Part 2. Size PDF of the resulting daughter bubbles2002 / C. MARTÍNEZ-BAZÁN, J. L. MONTAÑÉS, J. C. LASHERAS
-
Properties Characterization of Chemically Modified Hemp Hurds2014 / Nadezda Stevulova, Julia Cigasova, Adriana Estokova, Eva Terpakova, Anton Geffert, et al.
-
Analysis of the Rice Husk Pyrolysis Products from a Fluidized Bed Reactor
Abstract Rice husks are pyrolyzed in a fluidized bed pyrolyzer using glass beads as the fluidizing media. The effects of the rice husk feeding rate and the fluidizing nitrogen gas flow rates on the mass fraction of the produced syngas, bio-oil and...
2015 / Chen-Pei Hsu, An-Ni Huang, Hsiu-Po Kuo -
Modelagem fuzzy aplicada na detecção da vulnerabildade à erosão costeira2014 / Luciana Maria da Silva, Rodrigo Mikosz Gonçalves, Milde Maria da Silva Lira, Pedro de Souza Pereira
-
Techno-Economic Evaluation of Biodiesel Production from Waste Cooking Oil—A Case Study of Hong Kong2015 / Sanjib Karmee, Raffel Patria, Carol Lin
-
Inulin, a flexible oligosaccharide I: Review of its physicochemical characteristics
Abstract Inulin, a fructan-type polysaccharide, consists of (2→1) linked β-d-fructosyl residues (n =2–60), usually with an (1↔2) α-d-glucose end group. The applications of inulin and its hydrolyzed form oligofructose (n ...
2015 / Maarten A. Mensink, Henderik W. Frijlink, Kees van der Voort Maarschalk, Wouter L.J. Hinrichs -
Experimental investigation of the effects of various parameters on viscosity reduction of heavy crude by oil–water emulsion2015 / Talal Al-Wahaibi, Yahya Al-Wahaibi, Abdul-Aziz R. Al-Hashmi, Farouq S. Mjalli, Safiya Al-Hatmi
-
Oxy-combustion Studies Into the Co –Firing of Coal and Biomass Blends: Effects on Heat Transfer, Gas and Ash Compositions
Abstract Oxy-combustion with coal and biomass co-firing is a technology that could revolutionize fossil fuel power generation. It can significantly reduce harmful greenhouse gas emissions and permit the continued use of plentiful coal supplies and...
2014 / N. Jurado, H.G. Darabkhani, E.J. Anthony, J.E. Oakey -
A facile method for the large-scale continuous synthesis of graphene sheets using a novel catalyst2013 / Yi Shen, Aik Chong Lua
-
Fluidized bed modeling applied to the analysis of processes: review and state of the art
Abstract The fluidized bed is a technology that involves multiple phases, allowing for efficient contact between them, therefore it is widely used in the chemical industry, metallurgy, oil and thermal power generation. In fluidized bed processes,...
2014 / Caterina Gonçalves Philippsen, Antônio Cezar Faria Vilela, Leandro Dalla Zen -
Crystallization mechanism in melts of short n-alkane chains2013 / Muhammad Anwar, Francesco Turci, Tanja Schilling
-
Pyrolysis biochar systems, balance between bioenergy and carbon sequestration2014 / Kyle Crombie, Ondřej Mašek