Chemical engineering topic list of research papers
-
Optimization of Extraction and Enrichment of Steroidal Alkaloids from Bulbs of Cultivated Fritillaria cirrhosa2014 / Dongdong Wang, Shu Wang, Qingdan Du, Nanyi Wang, Simei Liu, et al.
-
Unsteady Flow of Reactive Viscous, Heat Generating/Absorbing Fluid with Soret and Variable Thermal Conductivity2014 / I. J. Uwanta, M. M. Hamza
-
Improved Transient Performance of a Fuzzy Modified Model Reference Adaptive Controller for an Interacting Coupled Tank System Using Real-Coded Genetic Algorithm2014 / Asan Mohideen Khansadurai, Valarmathi Krishnasamy, Radhakrishnan Thota Karunakaran
-
Effect of Sulfation on Zirconia-Pillared Montmorillonite to the Catalytic Activity in Microwave-Assisted Citronellal Conversion2014 / Is Fatimah, Dwiarso Rubiyanto, Thorikul Huda
-
Investigations of the Montmorillonite and Aluminium Trihydrate Addition Effects on the Ignitability and Thermal Stability of Asphalt2014 / Kai Zhu, Ke Wu, Bin Wu, Zhiyi Huang
-
Reduction of membrane fouling by innovative method (injection of air jet)2014 / Maryam-Sadat Amiraftabi, Navid Mostoufi, Mostafa Hosseinzadeh, Mohammad-Reza Mehrnia
-
Use of solar energy for biodiesel production and use of biodiesel waste as a green reaction solvent2014 / Brian M Agee, Gene Mullins, Daniel J Swartling
-
Influence of powdered Moringa oleifera seeds and natural filter media on the characteristics of tapioca starch wastewater2013 / Sri Suhartini, Nur Hidayat, Esti Rosaliana
-
A Steady State Model for Describing the Phosphate Lattice Loss
Abstract A steady-state model for the industrial dihydrate phosphoric acid plant is developed. It is based upon material and balance equations and fundamental treatment of thermodynamics. The thermodynamic model includes the main species that are...
2012 / Brahim Messnaoui, Ahmed Bouhaouss, Ahmed Derja -
Phase Behavior and Rheological Analysis of Reverse Liquid Crystals and W/I 2 and W/H 2 Gel Emulsions Using an Amphiphilic Block Copolymer2011 / Anna May, Kenji Aramaki, José María Gutiérrez
-
The effect of oxides in various aluminium powders on foamability
Abstract Al powders, manufactured by different powder metallurgical methods, with various sizes have been used to produce Al foams. Different oxide contents in various Al powders play a major role in foam expansion and stability. The airatomised...
2012 / S. Asavavisithchai, A.R. Kennedy -
High-power ultrasonic processing: Recent developments and prospective advances
Abstract Although the application of ultrasonic energy to produce or to enhance a wide variety of processes have been explored since about the middle of the 20th century, only a reduced number of ultrasonic processes have been established at...
2010 / Juan A. Gallego-Juarez -
Removal of Total Phosphorus From Septic Tank Effluent by theHybrid Constructed Wetland System
Abstract The main objectives of this study were to: (1) investigate the performance of TP removal from septic tank effluent by the hybrid constructed wetland consisting of a horizontal flow, and a vertical flow unit in series, (2) compare the...
2011 / Liu Wen, Cui Li Hua, Zhou Yi Ping, LEI Ze Xiang -
Research on International Carbon Emissions Trading and Optimal Exports Scale of China Carbon Emissions
Abstract This paper reviews the researches related to international carbon emission right trading. Based on the analysis of marginal abatement curves theory, it has been demonstrated that the fact that different countries or districts have different ...
2011 / Yun Zhanga -
Stability and Rheology of Aqueous Suspensions
Abstract Stability of aqueous suspensions of metal oxides and minerals based on aluminosilicates with various particle sizes distribution was measured by the rate of sedimentation, sedimentation volume and zeta potential for various concentrations...
2012 / M. Večeř, J. Pospíšil -
Thermodynamic analysis of 120MW thermal power plant with combined effect of constant inlet pressure (124.61bar) and different inlet temperatures
Abstract The thermal power plants are used to generate power. The thermal power plants are designed based on required conditions, but actually inlet conditions are not as per the designed conditions. Variations in the power outputs from power plant...
2013 / Ankur Geete, A.I. Khandwawala -
Acid-Functionalized Nanoparticles for Pretreatment of Wheat Straw2012 / D. Wang, M. Ikenberry, L. Peña, K. L. Hohn
-
Effect of disjoining pressure on terminal velocity of a bubble sliding along an inclined wall
Abstract The influence of salt concentration on the terminal velocities of gravity-driven single bubbles sliding along an inclined glass wall has been investigated, in an effort to establish whether surface forces acting between the wall and the...
2011 / Lorena A. Del Castillo, Satomi Ohnishi, Lee R. White, Steven L. Carnie, Roger G. Horn -
Study on hydrodynamic performance and mass transfer efficiency of nickel foam packing
Abstract The features of nickel foam packing were introduced. The hydrodynamic performance and mass transfer efficiency of nickel foam packing were measured and a mass transfer equation was established to predict the HETP results. Comparing with...
2011 / Weijiang Zhang, Bing Zhang, Zhiqiang Shi -
Autothermal Reforming of Methane with Integrated CO2 Capture in a Novel Fluidized Bed Membrane Reactor. Part 1: Experimental Demonstration2008 / F. Gallucci, M. Van Sint Annaland, J. A. M. Kuipers