Chemical engineering topic list of research papers
-
Oxalate Precipitation in Emulsion: from the Drop Scale to the Industrial Process
Abstract An original process of actinides coprecipitation, based on either pulsed or Taylor-Couette flows column, is studied. The novelty of this process lies in the confinement of the aqueous reagents in droplets, dispersed in an inert organic...
2012 / Abdenour Amokrane, Amine Kacem, Sophie Charton, François Puel, Jean-Paul Klein -
Layered clay/epoxy nanocomposites: Thermomechanical, flame retardancy, and optical properties2008 / Elcin Kaya, Metin Tanoğlu, Salih Okur
-
Development of Digital Microscale Dissolved Oxygen Analytical System
Abstract This paper introduces the working principles of the digital microscale dissolved oxygen analyzer and sensor. And it also introduces the design of the work system's hardware circuit, signal acquisition circuit and temperature compensation...
2011 / Xin Qi, Di Shu, Wang Hao, YunLong Chen, Juan Chen -
Studying the efficiency of grey water treatment by using rotating biological contactors system
Abstract The need for water is growing with increasing population and the adverse impacts of climate change especially in the Mediterranean basin. Innovative concepts and technologies are urgently needed to close the loop for water. Among the...
2012 / Amr M. Abdel-Kader -
Removal of bacteria by clinoptilolite rich mineral and its surfactant modified forms2013 / Beyhan Cansever Erdogan, Semra Ulku
-
Gas Permeation Properties of 1-Hexyl-3-Methylimidazolium Chloride Supported Liquid Membranes2012 / G. Zarca, I. Ortiz, A. Urtiaga
-
Prediction of Vapor Pressure of Fatty Acid Methyl Esters
Abstract Fossil fuels are depleting at a rapid rate, due to their ever increasing demand and so there is a need for alternative and sustainable fuel. Alternative fuels are needed and Biodiesel can be a promising alternative for diesel fuels. Vapor...
2013 / Parag Saxena, Jitesh C. Patel, Milind H. Joshipura -
Formation of Polymeric Porous Membrane Without Organic Solvent by Thermally Induced Phase Separation in LCST System (Hydroxypropylcellulose/Water)2012 / Hanafia, D. Bouyer, C. Pochatv Bohatier, C. Faur
-
Fabrication and Characterization of Organic Pervaporation Membranes to Recover Ethyl Acetate of Aqueous Solutions2012 / J. Garc’a-Ivars, M.I. Alcaina-Miranda, M.I. Iborra-Clar, A. Iborra-Clar
-
Post–combustion Carbon Dioxide Capture using Membrane Processes: A Sensitivity Analysis2012 / B. Belaissaoui, D. Willson, E. Favre
-
The removal of volatile organic compounds from supply air using a desiccant column – A theoretical study
Abstract The capability of silica gel to remove Volatile Organic Compounds (VOCs) from air under dynamic conditions was theoretically investigated using a packed bed desiccant column. A rigorous model was developed for the prediction of breakthrough ...
2013 / Matiwaza Ncube, Yuehong Su -
Determination of Pressure and Velocity in a Dead–end Inside–out Membrane Module used in Drinking Water Production2012 / G. Cano, Y. Wyart, J.V. Daurelle, K. Glucina, D. Bourdiol, et al.
-
Long-term operation of carbon dioxide capture system from a real coal-fired flue gas using dry regenerable potassium-based sorbents
Abstract Korea Institute of Energy Research (KIER) and Korea Electric Power Research Institute (KEPRI) have been developing a CO2 capture technology using dry sorbents. The CO2 removal in dry sorbent CO2 capture system consists of two reactors for...
2009 / Young Cheol Park, Sung-Ho Jo, Chong Kul Ryu, Chang-Keun Yi -
Integrated carbon capture and storage for an oxyfuel combustion process by using carbonation of Mg(OH)2 produced from serpentinite rock
Abstract The increasing atmospheric carbon dioxide concentration has lead to concerns about global warming. One of the options that can contribute to the reduction of carbon dioxide emissions is CO2 sequestration by mineral carbonation. In this...
2011 / Arshe Said, Sanni Eloneva, Carl-Johan Fogelholm, Johan Fagerlund, Experience Nduagu, et al. -
CO2 capture for refineries, a practical approach
Abstract This paper evaluates the opportunities and associated costs for post-combustion capture at a world-scale complex refinery. It is concluded that it is technically feasible to apply post-combustion capture at such a refinery. The CO2 source...
2009 / Jiri van Straelen, Frank Geuzebroek, Nicholas Goodchild, Georgios Protopapas, Liam Mahony -
Flexible integrated gasification co-generation facilities A technical and energy analysis
Abstract The aim of this study was to identify and analyse the technical and energy impacts of feedstock and product flexibility on integrated gasification co-generation facilities (IGCF) using current commercial ready technologies. The evaluation...
2009 / J.C. Meerman, A.P.C. Faaij, W.C. Turkenburg -
Pressure drop and mass transfer of a high capacity random packing. Application to CO2 post-combustion capture
Abstract Pressure drop and interfacial area have been measured for a modern high capacity random packing. Pressure drop and flooding limit are found to be in good agreement with the manufacturer software. It is observed that the interfacial area, ...
2009 / Pascal Alix, Ludovic Raynal -
Smart SU-8 pillars implemented in a microfluidic bioreactor for continuous measurement of glucose
Abstract In this contribution we explore a new and simple approach for immobilizing enzymes like glucose oxidase on SU-8 surfaces to develop a smart substrate integrated in microfluidics. SU-8 is a well known photoresist often used in microfluidic...
2010 / S. Talaei, O. Frey, S. Psoma, P.D. van der Wal, N.F. de Rooij -
Facile Preparation of Phosphotungstic Acid-Impregnated Yeast Hybrid Microspheres and Their Photocatalytic Performance for Decolorization of Azo Dye2013 / Lan Chen, Bo Bai
-
High Level Ethanol Production by Nitrogen and Osmoprotectant Supplementation under Very High Gravity Fermentation Conditions2013 / Pachaya Chan-u-tit, Lakkana Laopaiboon, Prasit Jaisil, Pattana Laopaiboon