Chemical engineering topic list of research papers
-
Municipal Sewage Sludge Drying Treatment by an Composite Modifier2012 / Na Wei
-
Vinyl Ester Oligomer Crosslinked Porous Polymers Prepared via Surfactant-Free High Internal Phase Emulsions2012 / Yun Zhu, Ye Hua, Shengmiao Zhang, Jianding Chen, Chun Pu Hu
-
Physico-Chemical Properties and Phase Behaviour of Pyrrolidinium-Based Ionic Liquids2010 / Urszula Domańska
-
Recovery of Stored Aerobic Granular Sludge and Its Contaminants Removal Efficiency under Different Operation Conditions2013 / Zhiwei Zhao, Shuo Wang, Wenxin Shi, Ji Li
-
Application of palm pressed fiber as a carrier for ethanol production by Candida shehatae TISTR58432012 / Wiboon Riansa-ngawong, Maneewan Suwansaard, Poonsuk Prasertsan
-
Benzoylation of Amines sans Alkali: A Green Protocol in Neat Phase2010 / Somnath Ghosh, Jhantu Das
-
A Study of the Source Traffic Generator Using Poisson Distribution for ABR Service2012 / Mohsen Hosamo
-
Landfill Leachates Treatment by /UV, /, Modified Fenton, and Modified Photo-Fenton Methods2012 / Jeremi Naumczyk, Izabela Prokurat, Piotr Marcinowski
-
The Multiple Effects of Precursors on the Properties of Polymeric Carbon Nitride2013 / Wendong Zhang, Qin Zhang, Fan Dong, Zaiwang Zhao
-
Fire load energy densities for risk-based design of car parking buildings
Abstract The time-equivalence method is one way to determine the appropriate fire severity in buildings. One of the input parameters required is the fire load energy density (FLED) and in a deterministic design this is taken to be a fixed value....
2015 / M.J. Spearpoint, M.Z.M. Tohir, A.K. Abu, P. Xie -
Discrete element modelling of flexible fibre packing
Abstract This paper presents Discrete Element Model simulations of packing of non-cohesive flexible fibres in a cylindrical vessel. No interstitial fluid effects are modelled. Each fibre-particle is modelled as a series of connected...
2014 / Paul Langston, Andrew R. Kennedy, Hannah Constantin -
Gas-particle Flow Modeling: Beyond the Dilute Limit
Abstract The flow of pulverized fuel in a power plant is one example of gas-particle flows in the energy and process industries. Computational Fluid Dynamics (CFD) is a widely used trouble shooting and engineering design tool increasingly deployed...
2015 / Allan I.J. Love, Donald Giddings, Henry Power -
Reuse Black Liquor of Alkali Pretreatment in Bioethanol Production
Abstract Over the past years, lack of energy fossil has become an important issue around the world, especially in developing countries such as Indonesia. Alternative energy is needed to replace utilization of fossil fuels. Bioethanol is providing...
2015 / Muryanto, Eka Triwahyuni, Hendris Hendarsyah, Haznan Abimanyu -
Co-Production of Olefins, Fuels, and Electricity from Conventional Pipeline Gas and Shale Gas with Near-Zero CO2 Emissions. Part I: Process Development and Technical Performance2015 / Yaser Salkuyeh, Thomas II
-
Effects of Membrane Properties on CO2 Desorption from Chemical Absorbents Using a Membrane Flash Process
Abstract Chemical absorption method is a major separation technique employed in CCS (Carbon dioxide Capture and Storage). In recent years, a novel process named a membrane flash process for regeneration of the absorbent was developed to realize an...
2013 / Nobuhide Takahashi, Kei Matsuzaki, Tetsuya Funai, Takuya Wada, Hiroshi Fukunaga, et al. -
Characterisation of an Automated Dual Piston Pressure Swing Adsorption (DP-PSA) System
Abstract The drive to fast Pressure Swing Adsorption (PSA) processes leads to the challenge of designing and analysing experiments that allow the testing of adsorbents under fast cycle conditions. Here we present the Dual Piston-Pressure Swing...
2013 / Wenli Dang, Daniel Friedrich, Stefano Brandani -
Effect of general rotation on Rayleigh–Taylor instability of two superposed fluids with suspended particles2014 / G. A. Hoshoudy, Pardeep Kumar
-
Mass Transfer Coefficient for CO2 Dissolution in Brine
Abstract A novel approach to geologic CO2 sequestration is the surface dissolution method. Effective implementation of this concept requires design calculations using applicable values of the mass transfer coefficient for CO2 into brine. ...
2013 / Christopher A.J. Blyton, Steven L. Bryant -
Evaluation of an “Off the Shelf” Automated Chemical Phosphorus Removal System
Abstract In order to reduce ferric chloride consumption and maintain effluent compliance, the wastewater plan in Beaver Dam, Wisconsin installed an ‘off the shelf’ phosphorus control system manufactured by Hach Lange Company. In this installation,...
2014 / K. Craig, R. Minnema, B. Dabkowski, M.S. Gironi -
Modelling of industrial biopharmaceutical multicomponent chromatography
Abstract The development and validation of a chromatography rate model for an industrial multicomponent chromatographic bioseparation is presented. The model is intended for use in a process scenario to allow specific variables critical to product...
2013 / Edward J. Close, Jeffrey R. Salm, Daniel G. Bracewell, Eva Sorensen