Chemical engineering topic list of research papers
-
Pressurised calcination–atmospheric carbonation of limestone for cyclic CO2 capture from flue gases
Abstract A study was carried out to investigate the CO2 capture performance of limestone under atmospheric carbonations following pressurised calcination. A series of tests was carried out to study the role of pressurised calcination using a...
2015 / Masoud Kavosh, Kumar Patchigolla, John E. Oakey, Edward J. Anthony, Scott Champagne, et al. -
Application of Advanced Technologies for CO2 Capture From Industrial Sources
Abstract The great majority of the research on CO2 capture worldwide is today devoted to the integration of new technologies in power plants, which are responsible for about 80% of the worldwide CO2 emission from large stationary sources. The...
2013 / Matteo C. Romano, Rahul Anantharaman, Antti Arasto, Dursun Can Ozcan, Hyungwoong Ahn, et al. -
CFD Analysis of a Slug Mixing Experiment Conducted on a VVER-1000 Model2008 / F. Moretti, D. Melideo, A. Del Nevo, F. D'Auria, T. Höhne, et al.
-
Interaction of Polybrominated Diphenyl Ethers and Aerobic Granular Sludge: Biosorption and Microbial Degradation2014 / Shou-Qing Ni, Qingjie Cui, Zhen Zheng
-
Hydrodynamics of a Novel Design Circulating Fluidized Bed Steam Reformer Operating in the Dense Suspension Upflow Regime2014 / Moataz Bellah M. Mousa, Seif-Eddeen K. Fateen, Essam A. Ibrahim
-
Using the properties of soil to speed up the start-up process, enhance process stability, and improve the methane content and yield of solid-state anaerobic digestion of alkaline-pretreated poplar processing residues2014 / Yiqing Yao, Yang Luo, Tian Li, Yingxue Yang, Hongmei Sheng, et al.
-
Part Load Behaviour of Power Plants with a Retrofitted Post-combustion CO2 Capture Process
Abstract The flexible and part load operation of fossil-fuelled power plants will increase due to the higher share of fluctuating renewable energies, like wind and solar power. In this work the part load behaviour of the post-combustion CO2 capture...
2014 / Volker Roeder, Alfons Kather -
Analysis of Thermoelectric Generator Performance by Use of Simulations and Experiments2014 / Olle Högblom, Ronnie Andersson
-
Particle size control of detergents in mixed flow spray dryers2015 / Mark Jonathan Crosby, Elaine Martin, Luis Martin De Juan, Gary Montague
-
Flexible Operation of CCS Power Plants to Match Variable Renewable Energies
Abstract The German Energiewende is resulting in high grid load changes caused by renewable energies. Therefore flexibility of power plants is getting more and more important. Future CCS power plants are usually equipped with more components than...
2013 / Michael Nimtz, Hans-Joachim Krautz -
Alternative Layouts for the Carbon Capture with the Chilled Ammonia Process
Abstract Many alternatives are being investigated for the carbon capture, but none appears to have been proved as the choice for full-scale applications. This work considers the Chilled Ammonia Process for coal-fired Ultra Super Critical power...
2013 / Gianluca Valenti, Davide Bonalumi, Philip Fosbøl, Ennio Macchi, Kaj Thomsen, et al. -
The Influence of K4[Fe(CN)6] Aerosol on the Flame Speed of Methane-air Flame
Abstract The influence of 1% aerosol of the water solution of potassium ferrocyanide K4[Fe(CN)6] on the flame speed of stoichoimetric methane- air flame, stabilized over the Mache-Hebra burner, has been studied experimentally and by computer...
2013 / Oleg Korobeinichev, Andrey Shmakov, Anatoly Chernov, Tatyana Bolshova, Yana Terenteva, et al. -
Progress in Calcium Looping Post Combustion CO2 Capture: Successful Pilot Scale Demonstration
Abstract The development of Calcium-Looping for CO2 capture has made vast progress in recent time. The technology has become a serious option for CO2 capture from fossile fuel fired power plants. Calcium-Looping is a highly efficient process which...
2013 / Heiko Dieter, Craig Hawthorne, Mariusz Zieba, Günter Scheffknecht -
Geometric Characteristics of Three Dimensional Reconstructed Anode Electrodes of Lithium Ion Batteries2014 / Cheolwoong Lim, Bo Yan, Leilei Yin, Likun Zhu
-
Fischer-tropschliquid Fuel Production by Co-gasification of Coal and Biomass in a Solar Hybrid Dual Fluidized Bed Gasifier
Abstract A coal to liquid (CTL)polygeneration process with a solar hybrid dual fluidized bed (SDFB) gasifier (SCTL) is investigated in recently processing paper. A storage unit was integrated to store sensible heat in bed material in order to reduce ...
2015 / P. Guo, W. Saw, P. van Eyk, P. Ashman, G. Nathan, et al. -
Modelling of a Solid Oxide Fuel Cell CHP System Coupled with a Hot Water Storage Tank for a Single Household2015 / Vincenzo Liso, Yingru Zhao, Wenyuan Yang, Mads Nielsen
-
Facility Layout Optimization of an Ammonia Plant Based on Risk and Economic Analysis
Abstract In this work the concept of process safety is incorporated in plant layout configuration of an ammonia plant. Four critical process units namely, primary reformer, secondary reformer, high temperature shift converter and ammonia converter...
2014 / Shah Md. Toufiqur Rahman, Md Tausif Salim, Sultana Razia Syeda -
Absolute and convective instabilities in counter-current gas–liquid film flows2014 / Rajagopal Vellingiri, Dmitri Tseluiko, Serafim Kalliadasis
-
Energy Recovery from Biomass by Fast Pyrolysis
Abstract Bioenergy is now accepted as having the potential to provide the major part of the projected renewable energy provisions of the future. It has been ascertained that the biomass is a common form of renewable energy and widely used in the...
2014 / J. Ward, M.G. Rasul, M.M.K. Bhuiya -
Investigation of Hydrogen Production Using Chemical Looping Reforming
Abstract Chemical looping reforming (CLR) is a relatively new method to produce hydrogen and is used to convert solid, liquid or gaseous fuels to energy. There are various advantages of this method such as inherent CO2 capture, minimal NOx emissions ...
2015 / Mohammed N. Khan, Tariq Shamim