Chemical engineering topic list of research papers
-
Coupled PermSMBR – Process design and development for 1,1-dibutoxyethane production
Abstract In this work, a new configuration of the simulated moving bed membrane reactor (PermSMBR) technology is presented, the coupled PermSMBR, where the tubular membranes are located after fixed-bed columns packed with the catalyst/adsorbent. By...
2013 / Carla S.M. Pereira, Viviana M.T.M. Silva, Alírio E. Rodrigues -
Membrane Systems Engineering for Post-combustion Carbon Capture
Abstract This study proposes a strategy for optimal design of hollow fiber membrane networks for post combustion carbon capture from power plant multicomponent flue gas. A mathematical model describing multicomponent gas permeation through a...
2013 / Ali Alshehri, Rajab Khalilpour, Ali Abbas, Zhiping Lai -
Post-Combustion CO2 Capture Using Solid Sorbents: 1 MWe Pilot Evaluation
Abstract Carbon dioxide capture and storage (CCS) is anticipated to be an important component of reducing worldwide CO2 emissions from stationary point sources, such as coal-fired power plants. One of the most important challenges to the widespread...
2013 / Holly Krutka, Sharon Sjostrom, Travis Starns, Martin Dillon, Roy Silverman -
Integrated Techno-economic and Environmental Assessment of an Amine-based Capture
Abstract A systematic methodology for integrated techno-economic and environmental assessment of CCS value chains is presented and applied to assess the impact of the CO2 concentration on an amine-based post-combustion CO2 capture process. In this...
2013 / Simon Roussanaly, Amy L. Brunsvold, Erik S. Hognes, Jana P. Jakobsen, Xianping Zhang -
The Calcium Looping Process for Low CO2 Emission Cement and Power
Abstract Calcium looping appears as one of the most promising technologies for CO2 capture in short-medium term plants featuring the combustion of fossil fuels. Ca-looping (CaL) is a regenerative process which takes advantage of the capacity of...
2013 / Matteo C. Romano, Maurizio Spinelli, Stefano Campanari, Stefano Consonni, Giovanni Cinti, et al. -
Characterization of spray-dried NiO oxygen carriers supported on alpha alumina
Abstract An oxygen carrier in chemical looping combustion (CLC) transfers oxygen from air to fuel. The oxygen carrier is composed of active metal oxides and support. The performance of the oxygen carrier greatly varies with the support materials...
2013 / Jeom-In Baek, Joong Beom Lee, Tae-Hyoung Eom, Kyeong-Sook Kim, Seug-Ran Yang, et al. -
Study of magnetic field dependent viscosity on a soret driven ferrothermohaline convection in a rotating porous medium2014 / R. Hemalatha
-
Performance appraisal of the A2/O process in domestic wastewater treatment replacing the anaerobic unit with UASB
Abstract Feasibility of a combined system consisting of an anaerobic up-flow anaerobic sludge blanket (UASB) followed by anoxic unit then aerobic activated sludge (AS) was investigated. The system was fed with normal domestic...
2015 / M.A. Moharram, H.S. Abdelhalim, E.H. Rozaik -
Techno-economic Study of Solar-assisted Post-combustion Carbon Capture System Integrated with Desalination
Abstract Solvent-based Post-combustion Carbon Capture (PCC), which can reduce CO2 emissions from coal-fired power plants, is one of the most advanced mature Carbon Capture and Storage (CCS) technologies at present. Two problems limit its...
2015 / Ruikai Zhao, Li Zhao, Shuai Deng, Yuting Tan, Yinan Liu, et al. -
Energy Efficient Process for CO2 Capture from Flue gas with Novel Fixed-site-carrier Membranes
Abstract CO2 capture from large stationary sources is considered as one of the most promising technologies to mitigate CO2 emissions in atmosphere and reduce global warming. Amine absorption is the state-of-the-art technology for CO2 capture, while...
2014 / Xuezhong He, May-Britt Hägg -
Nanofiber adsorbents for high productivity continuous downstream processing
Abstract An ever increasing focus is being placed on the manufacturing costs of biotherapeutics. The drive towards continuous processing offers one opportunity to address these costs through the advantages it offers. Continuous operation presents...
2015 / Oliver Hardick, Stewart Dods, Bob Stevens, Daniel G. Bracewell -
Investigation on Aromaticity Index and Double-Bond Equivalent of Aromatic Compounds and Ionic Liquids for Fuel Desulphurization2013 / Syamsul B. Abdullah, Z. Man, M. A. Bustam
-
A Novel Absorbent of Nano-Fe Loaded Biomass Char and Its Enhanced Adsorption Capacity for Phosphate in Water2013 / Hongguang Zhou, Zhenmao Jiang, Shiqiang Wei
-
Heat Transfer Analysis of Passive Residual Heat Removal Heat Exchanger under Natural Convection Condition in Tank2014 / Qiming Men, Xuesheng Wang, Xiang Zhou, Xiangyu Meng
-
Local Strain Rate and Curvature Dependences of Scalar Dissipation Rate Transport in Turbulent Premixed Flames: A Direct Numerical Simulation Analysis2014 / Y. Gao, N. Chakraborty, N. Swaminathan
-
Growing Chlorella vulgaris in Photobioreactor by Continuous Process Using Concentrated Desalination: Effect of Dilution Rate on Biochemical Composition2014 / Ângelo Paggi Matos, Regina Coeli de Oliveira Torres, Luiz Rodrigo Ito Morioka, Elisa Helena Siegel Moecke, Kepler Borges França, et al.
-
The Research on Modeling and Simulation of TFE Polymerization Process2014 / Jing Gao Sun, Qin Cao
-
Role of Polysaccharides in Complex Mixtures with Soy Protein Hydrolysate on Foaming Properties Studied by Response Surface Methodology2014 / Karina D. Martínez, Ana M. R. Pilosof
-
Metal-Containing Ionic Liquids: Highly Effective Catalysts for Degradation of Poly(Ethylene Terephthalate)2014 / Qun Feng Yue, Hua Guang Yang, Mi Lin Zhang, Xue Feng Bai
-
Effect of Material Thickness on Attenuation (dB) of PTFE Using Finite Element Method at X-Band Frequency2014 / Abubakar Yakubu, Zulkifly Abbas, Mansor Hashim