Chemical engineering topic list of research papers
-
The Experimental and Simulation Study of Selective Catalytic Reduction System in a Single Cylinder Diesel Engine Using NH3 as a Reducing Agent2014 / Manoj Kumar Athrashalil Phaily, Sreekumar Jayachandra Sreekala, Padmanabha Mohanan
-
Synthesis and Characterization of Hierarchical Porous -FeOOH for the Adsorption and Photodegradation of Rhodamine B2014 / Jianliang Cao, Gaojie Li, Yan Wang, Guang Sun, Hari Bala, et al.
-
The Removal of Uranium onto Nanoscale Zero-Valent Iron Particles in Anoxic Batch Systems2014 / Richard A. Crane, Thomas B. Scott
-
Integrated Analysis for Identifying Radix Astragali and Its Adulterants Based on DNA Barcoding2014 / Sihao Zheng, Dewang Liu, Weiguang Ren, Juan Fu, Linfang Huang, et al.
-
Process inhomogeneity leads to rapid side product turnover in cultivation of Corynebacterium glutamicum2014 / Friedrich Käß, Stefan Junne, Peter Neubauer, Wolfgang Wiechert, Marco Oldiges
-
Recovery of n-butanol using ionic liquid-based pervaporation membranes
Abstract Biobutanol (n-butanol) offers the possibility of expanding the production of bulk chemicals and fuels based on renewable resources. A drawback in the microbial production of n-butanol is the energy-intensive product recovery process, making ...
2012 / S. Heitmann, J. Krings, P. Kreis, A. Lennert, W.R. Pitner, et al. -
Deep Removal of Sulfur from Model Liquid Fuels using 1-Butyl-3-Methylimidazolium Chloride
Abstract Ionic liquids (ILs) as one kind of green solvents was studied and applied more and more with the development of green technology because of their unique physical and chemical properties. The removal of sulfur from liquid fuel using ionic...
2013 / Swapnil A. Dharaskar, Kailas L. Wasewar, Mahesh. N. Varma, Diwakar. Z. Shende, Chang Kyoo Yoo -
Heat transfer performance of a newly developed ice slurry generator: A comparative study
Abstract An advanced super-cooling type heat exchanger is presented as an ice slurry generator. It reduces investment costs and it can be operated with high heat transfer rates and at less power consumption compared with traditional heat exchangers...
2011 / T.A. Mouneer, M.S. El-Morsi, M.A. Nosier, N.A. Mahmoud -
Effects of powder flow properties and shear environment on the performance of continuous mixing of pharmaceutical powders
Abstract This paper focuses on two aspects of continuous powder mixing, namely characterizing the effects of material properties on the bulk powder flow behavior, and developing continuous blending strategies suitable for cohesive materials. The...
2013 / Aditya U. Vanarase, Juan G. Osorio, Fernando J. Muzzio -
Techno Economic Evaluation of Amine based CO2 Capture: Impact of CO2 Concentration and Steam Supply
Abstract The timing and selection of CO2 sources will affect the cost of achieving projected CCS based emission reductions. Performed process simulations and cost estimations clearly point out the impact of CO2 concentration and steam supply when...
2012 / Jo Husebye, Amy L. Brunsvold, Simon Roussanaly, Xiangping Zhang -
Design investigation of a solar energy heating system for anaerobic sewage treatment
Abstract Domestic and international researches of solar energy heating for anaerobic wastewater treatment are described in this paper. The design investigation of a solar heating anaerobic sewage treatment system for cold regions is proposed, (I)...
2012 / Zhenjie Ren, Zhili Chen, Li-an Hou, Wenbiao Wang, Kaisheng Xiong, et al. -
Absolute and high precision 3 degrees of freedom position sensor
Abstract We present a compact 3 degrees of freedom (dof) (X-Y-θz) absolute position sensor offering a sub-micrometric resolution. The travelling range is 15x15mm2 (translations) and ±180° (rotation), with an absolute precision better than 10μm over...
2009 / F. Cosandier, C. Canales, G. Boetsch, R. Clavel -
Pretreatment of rice straw with combined process using dilute sulfuric acid and aqueous ammonia2013 / Sung Kim, Sang Lee, Ju Lee, You Jung, Laxmi Thapa, et al.
-
Supercritical Extraction of Essential Oil from Mentha and Mathematical Modelling– the Influence of Plant Particle Size
Abstract Supercritical CO2 extraction was studied using dried leaves of Mentha, originated from the northern part of Libya. Leaves were milled and sieved to obtain different average particles (d p ...
2012 / S. Maksimovic, J. Ivanovic, D. Skala -
Biofuels from Algae
Abstract Fatty acid methyl esters (FAME) are used as alternative diesel fuel originating from renewable sources. The attention is focused on the materials that do not compete with food and feed production. Algae have a significant potential as an...
2012 / A. Kleinová, Z. Cvengrošová, J. Rimarčík, E. Buzetzki, J. Mikulec, et al. -
Electrochemical nucleation: comparison test of classical and atomistic nucleation models2012 / Juan Torrent-Burgués
-
Optimization of multiplane μPIV for wall shear stress and wall topography characterization2009 / Massimiliano Rossi, Ralph Lindken, Jerry Westerweel
-
Effect of the pre-treatment on the performance of MBR, Berghausen WWTP. Germany
Abstract Pilot scale experiments were carried out to examine the effect of the pre-treatment methods on the performance of MBR. The PURON® MBR module was used in this study. In order to investigate the effect of pre-treatment on the behaviour of...
2011 / Medhat A.E. Moustafa -
Natural gas dehydration by desiccant materials
Abstract Water vapor in a natural gas stream can result in line plugging due to hydrate formation, reduction of line capacity due to collection of free water in the line, and increased risk of damage to the pipeline due to the corrosive effects of...
2011 / Hassan A.A. Farag, Mustafa Mohamed Ezzat, Hoda Amer, Adel William Nashed -
Mathematical modeling of the integrated process of mercury bioremediation in the industrial bioreactor2010 / Paweł Głuszcz, Jerzy Petera, Stanisław Ledakowicz