Chemical engineering topic list of research papers
-
Removal Of Phenol From Wastewater By Using Low-Cost Catalyst From Metal Production2014 / Blanka Galbičková, Maroš Soldán, Michal Belčík, Karol Balog
-
Hydrodynamically mediated breakup of droplets in microchannels2011 / Zhizhao Che, Nam-Trung Nguyen, Teck Neng Wong
-
An Assessment of the Effects of Micron-Particle Aggregation on the Performance of Zinc-Silica Composite Coatings Using Betti Numbers2013 / Jianxin Xu, Xiuli Sang, Hua Wang, Yunying Fan
-
Improvement of Lifetime Using Transition Metal-Incorporated SAPO-34 Catalysts in Conversion of Dimethyl Ether to Light Olefins2013 / Hyo-Sub Kim, Su-Gyung Lee, Young-Ho Kim, Dong-Hee Lee, Jin-Bae Lee, et al.
-
Photodegradation of Trace Trichloronitromethane in Water under UV Irradiation2014 / Lin Deng, Zhiren Wu, Caiqian Yang, Yung-Li Wang
-
Anaerobic Digestion and Biogas Production: Combine Effluent Treatment with Energy Generation in UASB Reactor as Biorefinery Annex2014 / Mauro Berni, Ivo Dorileo, Grazielle Nathia, Tânia Forster-Carneiro, Daniel Lachos, et al.
-
Modelling the Fate of Sulphur During Pulverized Coal Combustion under Conventional and Oxy-fuel Conditions
Abstract Focus of the present study is on the fate of sulphur during coal combustion and modelling of the corresponding SOx formation mechanisms. The sulphur chemistry during coal combustion in general is briefly described and potential effects of...
2013 / Michael Müller, Uwe Schnell, Günter Scheffknecht -
Analysis of the Combustion Efficiencies and Heat Release Rates of Pool Fires in Ceiling Vented Compartments
Abstract This study focuses on the combustion efficiencies and further the heat release rates for pool fires in ceiling vented compartments. The concept of plume equivalence ratio (PER) is introduced to express the ventilation conditions for the...
2013 / Man Yuan, Bing Chen, Changhai Li, Jiaqing Zhang, Shouxiang Lu -
Enhanced Photocatalytic Degradation of Salicylic Acid in Water-ethanol Mixtures from Titanium Dioxide Grafted with Hexadecyltrichlorosilane
Abstract The aim of this paper is to study the effect of the chemical modification on the photocatalytic properties of TiO2. The TiO2 Degussa-P25 nanoparticles are chemically modified using the hydrophobic organosilane hexadecyltrichlorosilane...
2014 / Mounir Kassir, Thibault Roques-Carmes, Karine Assaker, Tayssir Hamieh, Angelina Razafitianamaharavo, et al. -
Outdoor Prototype Results for Direct Atmospheric Capture of Carbon Dioxide
Abstract At Carbon Engineering, we have built a prototype air contactor with 10 m3 of packing volume, and have absorbed carbon dioxide from ambient air for over 1000hours of outdoor operation. Our prototype was built to: a) test our cross-flow,...
2013 / Geoffrey Holmes, Kevin Nold, Tylor Walsh, Kenton Heidel, Matthew A. Henderson, et al. -
Preparation of pellets containing Pothomorphe umbellata extracts by extrusion-spheronization: improvement of 4-nerolidylcatechol photostability2012 / César A. de Araújo-Júnior, Fernanda S. de Oliveira Costa, Stephânia F. Taveira, Ricardo N. Marreto, Marize C. Valadares, et al.
-
Study of the induration phenomena in single pellet to traveling grate furnace
Abstract The process for pelletizing iron ore fines is an important operation unit for producing high quality of raw materials for the subsequent reduction processes such as blast furnace or direct reduction. The process essentially involves...
2013 / Flávia de Paula Vitoretti, José Adilson de Castro -
Overview of, and Experimental Methodology for, Sorption Enhanced Hydrogen Production
Abstract The worldwide abundance and relative low cost of coal, and its increasing use in gasification for syngas production for synthetic fuel and chemical manufacturing, presents ample opportunity for H2 production with inherent CO2 capture,...
2013 / Alissa Cotton, Kumar Patchigolla, John E. Oakey -
Optimization of an Existing 130 Tonne Per Day CO2 Capture Plant from a Flue Gas Slipstream of a Coal Power Plant
Abstract An optimization study has been conducted on an existing 130 tonne per day carbon dioxide capture plant. A rate- based modelling approach is used to simulate the performance of the CO2 capture plant using actual plant process flow-sheet and...
2013 / Ahmed Aboudheir, Walid Elmoudir -
Stability of rice bran oil extracted by SFE and soxhlet methods during accelerated shelf-life storage2014 / A. Mariod, M. Ismail, N. F. Abd Rahman, B. Matthaus
-
Performance Analysis of an Integrated Fixed Bed Gasifier Model for Different Biomass Feedstocks2013 / Sharmina Begum, Mohammad Rasul, Delwar Akbar, Naveed Ramzan
-
Comprehensive Characterization of Napier Grass as a Feedstock for Thermochemical Conversion2015 / Isah Mohammed, Yousif Abakr, Feroz Kazi, Suzana Yusup, Ibraheem Alshareef, et al.
-
Comparison of Pressure Driven Electrolytic Membranes (PDEM) and Solid Electrolyte Oxygen Pumps (SEOP) for Small Scale Oxygen Production
Abstract This work evaluates the thermodynamic performances of two oxygen separation technologies, Pressure Driven Electrolytic Membranes (PDEM) and Solid Electrolyte Oxygen Pumps (SEOP), focusing on the application to small scale oxygen production. ...
2015 / Paolo Iora, Paolo Chiesa, Stefano Campanari -
Special Issue: Design and Engineering of Microreactor and Smart-Scaled Flow Processes2014 / Volker Hessel
-
The rheology of three-phase suspensions at low bubble capillary number2014 / J. M. Truby, S. P. Mueller, E. W. Llewellin, H. M. Mader