Chemical engineering topic list of research papers
-
Evaluation of amine-blend solvent systems for CO2 post-combustion capture applications
Abstract This work evaluates amine-blend solvent systems for CO2 post-combustion capture applications for a 600 MWe conventional coal-fired power plant. The equilibrium-based Aspen Plus® absorption/desorption simulation tool was used for this...
2013 / Adewale Adeosun, Mohammad R.M. Abu-Zahra -
Numerical and Experimental Study on the Diffusion Property of Difluoromethane (HFC-32) in Leakage
Abstract With the development of industry in China, production and use of dangerous chemicals gradually increased, and as a result leakage accidents caused by that happen more and more frequently. In the field of refrigerants in air conditioner,...
2014 / Yu-nong Li, Jun-jun Tao, Yu-chong Han, Xue Han, Jun Qin -
Combustion Chemistry and Decomposition Kinetics of Forest Fuels
Abstract A brief review is given of the studies in combustion chemistry and decomposition kinetics of forest fuels (FF). The methods used in the study to investigate the FF pyrolysis kinetics and the combustion of the Siberian forests are described. ...
2013 / Oleg P. Korobeinichev, Alexander A. Paletsky, Munko B. Gonchikzhapov, Inna K. Shundrina, Haixiang Chen, et al. -
Experimental and numerical investigation of heat transfer from a heated horizontal cylinder rotating in still air around its axis
Abstract In the present paper, the experimental system under consideration is a rotating cylinder of 50mm diameter placed in still air. The numerical calculations are carried out by using a finite volume method based computational fluid dynamics...
2013 / Reda I. Elghnam -
Development of Amine-Modified Solid Sorbents for Postcombustion CO2 Capture
Abstract Amine-modified solid sorbents are potentially good candidates for postcombustion CO2 capture. We synthesized a series of amine-modified mesoporous silica sorbents, and measured their CO2 adsorption capacities. Among them, mesoporous silica...
2013 / Tsuyoshi Watabe, Yosuke Nishizaka, Shingo Kazama, Katsunori Yogo -
Glass capillary microfluidics for production of monodispersed poly (dl-lactic acid) and polycaprolactone microparticles: Experiments and numerical simulations
Abstract Hypothesis Droplet size in microfluidic devices is affected by wettability of the microfluidic channels. Three-dimensional countercurrent flow focusing using assemblies of chemically inert glass capillaries is expected to...
2013 / Goran T. Vladisavljević, Hamed Shahmohamadi, Diganta B. Das, Ekanem E. Ekanem, Zhandos Tauanov, et al. -
Investigation of the influence of capillary effect on operation of the loop heat pipe2015 / Dariusz Mikielewicz, Krzysztof Błauciak
-
Dynamic Simulation of Post-Combustion Capture System
Abstract Post-combustion capture, as one of candidate technologies for carbon dioxide emission mitigation, has been employed in the chemical industry to separate CO2 from a gas mixture. However, the largest CO2 emission industry in China is the...
2013 / Xu Zhaofeng, He Xin, Xue Yali, Li Zheng -
Improvement of Fire Hydrant Design to Enhance Water Main Flushing
Abstract Flushing is a good practice to avoid problems related to sediment, bio-film growth, and corrosion. Artificial sediment was removed from fire hydrant with pilot scale water distribution main. The sediment removal in fire hydrant and main was ...
2014 / I.-h. Hyun, S. Cheon, D. Kim, D. Seck, S. Choi -
Research on viscosity-reduction technology by electric heating and blending light oil in ultra-deep heavy oil wells2014 / Mo Zhu, Haiquan Zhong, Yingchuan Li, Cheng Zeng, Yue Gao
-
Natural Magnetite: an efficient catalyst for the degradation of organic contaminant2015 / Hongping HE, Yuanhong ZHONG, Xiaoliang LIANG, Wei TAN, Jianxi ZHU, et al.
-
Experiment and Optimization for Simultaneous Carbonation of Ca2+ and Mg2+ in A Two-phase System of Insoluble Diisobutylamine and Aqueous Solution2015 / Wenlong Wang, Man Wang, Xin Liu, Peng Wang, Zhenqian Xi
-
An Innovative Hybrid 3D Analytic-Numerical Approach for System Level Modelling of PEM Fuel Cells2013 / Gregor Tavčar, Tomaž Katrašnik
-
Cloud Point Extraction of Parabens Using Non-Ionic Surfactant with Cylodextrin Functionalized Ionic Liquid as a Modifier2013 / Md Noorashikin, Muggundha Raoov, Sharifah Mohamad, Mhd Abas
-
Effect of Preparation Methods on Crystallization Behavior and Tensile Strength of Poly(vinylidene fluoride) Membranes2013 / Jie Liu, Xiaolong Lu, Chunrui Wu
-
Three Methods for Estimating the Entropy Parameter M Based on a Decreasing Number of Velocity Measurements in a River Cross-Section2014 / Giulia Farina, Stefano Alvisi, Marco Franchini, Tommaso Moramarco
-
Effects of Additives on the Morphology and Performance of PPTA/PVDF in Situ Blend UF Membrane2014 / Hong-Bin Li, Wen-Ying Shi, Yu-Feng Zhang, Dong-Qing Liu, Xiao-Feng Liu
-
Improved Cellulose by Ionic Liquid Mixture with Solid Acid Catalysis and Its Application in Polyethylene Glycol Liquefaction2013 / Qiyu Chen, Qingyue Wang, Naoki Mitsumura, Hiroki Niida
-
Refining Kinetics of Selected Elements in the Industrial Silicon Process2015 / Ida Kero, Mari K. Næss, Vegar Andersen, Gabriella M. Tranell
-
Numerical Study of a Bi-disperse Gas-solid Fluidized Bed Using an Eulerian and Lagrangian Hybrid Model
Abstract In this paper, we present a hybrid model for the numerical assessment of poly-disperse gas-solid fluidized beds. The main idea of such a modeling strategy is to use a combination of a Lagrangian discrete phase model (DPM) and a kinetic...
2015 / Simon Schneiderbauer, Stefan Puttinger, Stefan Pirker