Chemical engineering topic list of research papers
-
UV Irradiation Chlorine Dioxide Photocatalytic Oxidation of Simulated Fuchsine Wastewater by UV-Vis and Online FTIR Spectrophotometric Method2012 / Laishun Shi, Xiaomei Wang, Na Li, Chunlei Huai, Jie Liu
-
Development of Rotary Magnetoferrite Treatment with Stirrers for Waste Water Treatment Plants to Reduce Excess Sludge2012 / Mahmudul Kabir, Masafumi Suzuki, Noboru Yoshimura
-
Optimization of Inulinase Production from Garlic by Streptomyces sp. in Solid State Fermentation Using Statistical Designs2011 / M. Dilipkumar, M. Rajasimman, N. Rajamohan
-
Effects of Thermal Diffusion and Chemical Reaction on MHD Flow of Dusty Visco-Elastic (Walter’s Liquid Model-B) Fluid2010 / Om Prakash, Devendra Kumar, Y. K. Dwivedi
-
CFD Prediction of Erosion Wear in Centrifugal Slurry Pumps for Dilute Slurry Flows2011 / K. Pagalthivarthi, P. Gupta, Vipin Tyagi, M. Ravi
-
The minimum or natural rate of flow and droplet size ejected by Taylor cone–jets: physical symmetries and scaling laws2013 / A M Gañán-Calvo, N Rebollo-Muñoz, J M Montanero
-
Gas and Particulate Matter Products Formed in a Laminar Flow Reactor: Pyrolysis of Single-Component C2 Fuels
Abstract Investigations that rank the tendencies of single-component fuels to form soot have given useful insights into how molecules and local molecular structure influences the conversion of carbon in fuel to soot. These studies can provide...
2015 / A. Eveleigh, N. Ladommatos, R. Balachandran -
Long-Term Degradation of Composites Exposed to Liquid Environments in Agriculture2015 / P. Valášek
-
Modelling of Flashing in Capillary Tubes using Homogeneous Equilibrium Approach
Abstract A model for the two phase flow of refrigerant through a capillary tube has been developed. This model assumes mechanical& thermal equilibrium between the phases. The flashing phenomenon occurs when a liquid is out of thermodynamic...
2015 / Rahul Ingle, Vinod Singh Rao, L.Srinivasa Mohan, Yi Dai, Gunaranjan Chaudhry -
Optimization of Sampling Cell Size for Fingerprint Positioning2014 / Wei Liu, Yongle Chen, Yongping Xiong, Limin Sun, Hongsong Zhu
-
The pyrolysis and gasification of digestate from agricultural biogas plant / Piroliza i gazyfikacja pofermentu z biogazowni rolniczych2015 / Dariusz Wiśniewski, Janusz Gołaszewski, Andrzej Białowiec
-
Boron removal from aqueous solutions using alginate gel beads in fixed-bed systems2014 / Hary Demey-Cedeño, Montserrat Ruiz, Jesús Alberto Barron-Zambrano, Ana Maria Sastre
-
Bio-butanol production from glycerol with Clostridium pasteurianum CH4: the effects of butyrate addition and in situ butanol removal via membrane distillation2015 / De-Shun Lin, Hong-Wei Yen, Wei-Chen Kao, Chieh-Lun Cheng, Wen-Ming Chen, et al.
-
A model based approach for identifying robust operating conditions for industrial chromatography with process variability
Abstract A model based approach has been developed and used to identify robust operating conditions for an industrial hydrophobic interaction chromatography where resin lot variability, combined with feed stream variability, was resulting in serious ...
2014 / Edward J. Close, Jeffrey R. Salm, Daniel G. Bracewell, Eva Sorensen -
Acceleration of biodetoxification on dilute acid pretreated lignocellulose feedstock by aeration and the consequent ethanol fermentation evaluation2016 / Yanqing He, Jian Zhang, Jie Bao
-
Preliminary Cost Evaluation of Integrated Aqueous Ammonia Capture with Mineralisation Using Recyclable Salts for Distributed CCS
Abstract Carbon dioxide capture and storage by mineralization (CCSM), also known as ex-situ mineralization, is an important technology for industrial CCS. The integration of CO2 capture using aqueous ammonia with ex-situ mineralisation avoids...
2013 / Xiaolong Wang, Mercedes Maroto-Valer, Gao Shiwang, Xu Shisen -
The Role of SO2 in the Chemistry of Amine-based CO2 Capture in PCC
Abstract Most coals contain a certain amount of sulfur. Upon combustion most of the sulfur is initially oxidized to SO2 and later to SO3 and sulfuric acid. If gaseous SO2 enters the PCC (post combustion capture) plant it is immediately absorbed into ...
2013 / Yaser Beyad, Robert Burns, Graeme Puxty, Marcel Maeder -
Experimental Investigation on Phase Change Material based Thermal Energy Storage Unit
Abstract This work investigates experimentally the performance of a thermal storage unit with phase change material encapsulated in cylinders. Air is the heat transfer fluid that flows across the tube banks to charge and discharge the storage...
2013 / M.J. Kabbara, N.Ben Abdallah -
Experimental Study on the Performance of Membrane based Multi- effect Dehumidifier Regenerator Powered by Solar Energy
Abstract This study aims to provide an experimental performance analysis of a membrane based multi-effect regenerator for dehumidification application powered by solar thermal energy. The regenerator system is used as a desiccant solution...
2014 / F.H. Choo, M. KumJa, K. Zhao, A. Chakraborty, E.T.M. Dass, et al. -
Flow Dynamics and Heat Transfer Characteristics of Upward Impinging Jets
Abstract Upward, laminar, axisymmetric, submerged impinging jets, with water as the working fluid, are numerically investigated in detail, with the impingement surface subjected to high heating rates. The heating greatly changes the density,...
2013 / Chandra Shekhar, Koichi Nishino