Chemical engineering topic list of research papers
-
Oxycombustion for Carbon Capture on Coal Power Plants and Industrial Processes: Advantages, Innovative Solutions and Key Projects
Abstract For decades oxycombustion has contributed to improving efficiency, flexibility, emissions and the cost of many industrial processes such as for metals and glass production. More recently, oxycombustion has emerged as a competitive option...
2013 / Nicolas Perrin, Richard Dubettier, Frederick Lockwood, Philippe Court, Jean-Pierre Tranier, et al. -
Operating ranges of gas–liquid capillary microseparators: Experiments and theory
Abstract An experimental and theoretical study of capillary gas/liquid phase microseparators is presented. The device studied comprises a main microchannel with a set of capillaries fabricated to each side so that the liquid (wetting) phase can be...
2014 / Mark D. Roydhouse, Marc Pradas, Noor Al-Rifai, Benjamin Azizi, Enhong Cao, et al. -
New Model for Waves in a Falling Film
Abstract The new model is developed for long-wave perturbations in a falling liquid film. The model is based on the boundary-layer approach and expansion of velocity into the system of linearly independent basic functions (harmonics), which...
2013 / S.P. Aktershev, S.V. Alekseenko -
Overall Process Analysis and Optimisation for CO2 Capture from Coal Fired Power Plants based on Phase Change Solvents Forming Two Liquid Phases
Abstract In this work the potential of a novel post-combustion CO2 capture process is analysed with respect to the integrated overall process. As solvent a blend of two amines (DEEA/MAPA) which forms two liquid phases under CO2 loading is used. The...
2013 / Ulrich Liebenthal, Diego Di D. Pinto, Juliana G. M.-S. Monteiro, Hallvard F. Svendsen, Alfons Kather -
Restrictions and Limitations for the Design of a Steam Generator for a Coal-fired Oxyfuel Power Plant with Circulating Fluidised Bed Combustion
Abstract As general restrictions for the design of Oxyfuel pulverised coal-fired (PC) steam generators are commonly known, the purpose of this work is to show general restrictions for the design of an Oxyfuel coal-fired steam generator using a...
2013 / Claas Günther, Matthias Weng, Alfons Kather -
Cold-Curing Structural Epoxy Resins: Analysis of the Curing Reaction as a Function of Curing Time and Thickness2014 / Carola Corcione, Fabrizio Freuli, Mariaenrica Frigione
-
Measurement of bubble sizes in fluidised beds using electrical capacitance tomography
Abstract Electrical capacitance tomography (ECT) provides a means for non-invasively imaging multiphase flows, such as those in fluidised beds. Traditionally ECT images are reconstructed using the assumption that the distribution of permittivity...
2015 / T.C. Chandrasekera, Y. Li, D. Moody, M.A. Schnellmann, J.S. Dennis, et al. -
Experimental Study on Dry Torrefaction of Beech Wood and Miscanthus2015 / Eyerusalem Gucho, Khurram Shahzad, Eddy Bramer, Niaz Akhtar, Gerrit Brem
-
Characterization of Combustion Chemiluminescence: An Image Processing Approach
Abstract The applicability of image data processing to estimate the spatial distribution of Air/Fuel ratio at the flame front on gas combustion systems are presented and discussed. The objective is to devise a procedure capable of converting a...
2014 / Teodoro Trindade, Artur Ferreira, Edgar Fernandes -
A numerical study on helical vortices induced by a short twisted tape in a circular pipe
Abstract Helical vortices, as one kind of secondary flows, are recently observed downstream of the short twisted tape. The behaviors of vortices, which have significant effects on the efficiency of twisted tape, are not well understood. As such, the ...
2015 / Wen Liu, Bofeng Bai -
Optimization of a chemical-looping auto-thermal reforming system working with a Ni-based oxygen-carrier
Abstract In chemical-looping auto-thermal reforming (CLRa), hydrogen is produced without the need of an exterior heat supply. Thus, an important aspect to be considered in the design of a CLRa system is the heat balance. In this work, mass and heat...
2011 / María Ortiz, Alberto Abad, Luis F. de Diego, Pilar Gayán, Francisco García-Labiano, et al. -
Electrospray of a very viscous liquid in a dielectric liquid bath2010 / Francisco Higuera
-
KCl-Induced Corrosion of an FeCrAl Alloy at 600 °C in O2 + H2O Environment: The Effect of Pre-oxidation2014 / N. Israelsson, J. Engkvist, K. Hellström, M. Halvarsson, J.-E. Svensson, et al.
-
Thermal Properties and Crystallite Morphology of Nylon 66 Modified with a Novel Biphenyl Aromatic Liquid Crystalline Epoxy Resin2013 / Zhiqi Cai, Shuang Mei, Yuan Lu, Yuanqi He, Pihui Pi, et al.
-
Multimicronutrient Slow-Release Fertilizer of Zinc, Iron, Manganese, and Copper2014 / Siladitya Bandyopadhyay, Kunal Ghosh, Chandrika Varadachari
-
Performance Assessment of Sintered Metal Fiber Filters in Fluid Catalytic Cracking Unit2014 / Liang Yang, Zhongli Ji, Qiaoqi Xu, Hao Li
-
Experimental Research and Numerical Simulation on Gas-Liquid Separation Performance at High Gas Void Fraction of Helically Coiled Tube Separator2014 / Yongxue Zhang, Chan Guo, Hucan Hou, Guomin Xue
-
Attenuation of municipal landfill leachate through land treatment2014 / Maryam Pazoki, Mohammad Abdoli, Abdolreza Karbassi, Naser Mehrdadi, Kamyar Yaghmaeian
-
An Improved Method for Removal of Azo Dye Orange II from Textile Effluent Using Albumin as Sorbent2012 / Tadashi Ohashi, Alícia Jara, Anabelle Batista, Luciana Franco, Marcos Lima, et al.
-
Situations in traffic — how quickly they change2011 / Małgorzata Krawczyk, Cristina Ruiz, Krzysztof Kułakowski