Chemical engineering topic list of research papers
-
Surface Modification of AMH-3 for Development of Mixed Matrix Membranes
Abstract AMH-3 layered silicate is an attractive material for gas separation applications due to its 3D structure with crystallographic pore size of 3.4Å. Nevertheless, AMH-3 is strongly hydrophilic due to the presence of cations between the...
2016 / Elaine Chong Nyuk Tzi, Oh Pei Ching -
Biodrying Process Efficiency: -Significance of Reactor Matrix Height
Abstract Waste to energy concept should become a reality to meet the critical issues faced by the solid waste management system of developing nations. Energy oriented municipal solid waste conversion technologies have the potential to reduce the...
2016 / Asha P. Tom, Ajit Haridas, Renu Pawels -
An investigation of heat transfer losses in reciprocating devices
Abstract The paper presents a detailed computational-fluid-dynamic study of the thermodynamic losses associated with heat transfer in gas springs. This forms part of an on-going investigation into high-efficiency compression and expansion devices...
2016 / Caroline Willich, Christos N. Markides, Alexander J. White -
Diastereomeric salt precipitation based resolution of ibuprofen by gas antisolvent method
Abstract We investigated the resolution and crystallization of ibuprofen with (R)-phenylethylamine based on diastereomeric salt formation using the supercritical gas antisolvent (GAS) method. Our goal was to study the effects of the operational...
2016 / László Lőrincz, György Bánsághi, Máté Zsemberi, Sandra de Simón Brezmes, Imre Miklós Szilágyi, et al. -
Theoretical Calculations on the Feasibility of Microalgal Biofuels: Utilization of Marine Resources Could Help Realizing the Potential of Microalgae2016 / Hanwool Park, Choul-Gyun Lee
-
Study of the influence of the operational parameters on the photoelectro-Fenton performance of an industrial wastewater treatment prototype using Orange II as a model pollutant
Abstract A two-stage photoelectro-Fenton reactor was built and employed to test its ability to remove colour using Orange II as a model dye compound. A set of four critical operational variables was defined for the reactor under study. In order to...
2016 / Irma Robles, Francisco J. Rodríguez-Valadez, Eduardo Castaño, Luis A. Godínez -
Pollution Control of HCl Synthesis Unit in Chloro-Alkali Industry
Abstract Control of chlorine gas release is a major concern for most chlor-alkali industries. Normally manual and proportional-derivative-integral control strategies are provided for control. In HCl synthesis plant there are chances of chlorine...
2016 / Meijo Emmanuel, Saurabh Sahadev -
Influence of short rear end tapers on the wake of a simplified square-back vehicle: wake topology and rear drag2016 / Anna-Kristina Perry, Giancarlo Pavia, Martin Passmore
-
Enhanced methane steam reforming activity and electrochemical performance of Ni0.9Fe0.1-supported solid oxide fuel cells with infiltrated Ni-TiO2 particles2016 / Kai Li, Lichao Jia, Xin Wang, Jian Pu, Bo Chi, et al.
-
Synergy of Microfluidics and Ultrasound2016 / David Fernandez Rivas, Simon Kuhn
-
Effect of phosphate availability on cyanophycin accumulation in Synechocystis sp. PCC 6803 and the production strain BW86
Abstract The cyanobacterial wild-type strain Synechocystis sp. PCC 6803 and its engineered strain BW86 were cultivated under defined conditions in photobioreactors to investigate the effect of phosphate availability on cyanophycin accumulation....
2016 / Andreas Trautmann, Björn Watzer, Annegret Wilde, Karl Forchhammer, Clemens Posten -
Experimental Study on the Effect of Parameters on Sedimentation and Coalescing Profiles in Liquid-liquid Batch Settler
Abstract Efficient separation of liquid-liquid mixture based on dispersion is often required in many industrial processes. Influence of mixing time, initial height of dispersion, mixing intensity and oil phase ratio on the separation time in...
2016 / Waqas Aleem, Nurhayati Mellon -
Evaluation of the Degree of the Leak-Through of Fine Dust in a Wet Cleaning Abatement Decreasing Dust Systems of Aspiration Schemes in the Building Construction Industry
Abstract The article is devoted to the improvement of environmental safety while reducing emissions of dust exhausting by decreasing dusting schemes of aspiration into atmosphere within the construction industry. The use of high- effective dust...
2016 / S.A. Koshkarev, D.V. Azarov, Astali Majd -
3D CFD validation of invert trap efficiency for sewer solid management using VOF model
Abstract Earlier investigators have numerically carried out performance analysis of the invert trap fitted in an open channel using the stochastic discrete phase model (DPM) by assuming the open channel flow to be closed conduit flow under pressure...
2016 / Mohammad Mohsin, Deo Raj Kaushal -
Determination of Hemicellulose, Cellulose and Lignin in Moso Bamboo by Near Infrared Spectroscopy2015 / Xiaoli Li, Chanjun Sun, Binxiong Zhou, Yong He
-
Development of a mixer-viscometer for studying rheological behavior of settling and non-settling slurries2016 / Ben Bbosa, Emmanuel DelleCase, Michael Volk, Evren Ozbayoglu
-
Multiscale analysis of turbulence-flame interaction in premixed flames
Abstract Multiscale analysis of turbulence–flame interaction is performed using direct numerical simulation (DNS) data of premixed flames. Bandpass filtering method is used to educe turbulent eddies of various sizes and their vorticity and strain...
2016 / N.A.K. Doan, N. Swaminathan, N. Chakraborty -
Effects of temperature and equivalence ratio on mass balance and energy analysis in loblolly pine oxygen gasification2016 / Nourredine Abdoulmoumine, Avanti Kulkarni, Sushil Adhikari
-
An experimental investigation into cavitation behaviour and pressure characteristics of alternative blade sections for propellers2015 / Emin Korkut, Mehmet Atlar, Dazheng Wang
-
Coated pellets with delayed-release glucose for prevention of hypoglycemic episodes2016 / Dana Sabadková, Aleš Franc, Jan Muselík, David Neumann