Chemical engineering topic list of research papers
-
Effects of Flue Gas Addition on the Premixed Oxy-methane Flames in Atmospheric Condition
Abstract This numerical study investigates the flame characteristics of premixed methane with various inert gas dilutions in order to simulate oxy-combustion of hydrocarbon fuels with flue gas recirculation system. In general, a flue gas consists of ...
2015 / Yueh-Heng Li, Guan-Bang Chen, Yei-Chin Chao -
Two-dimensional Physical and CFD Modelling of Large Gas Bubble Behaviour in Bath Smelting Furnaces2010 / Yuhua Pan, David Langberg
-
Statistical Analysis of Turbulent Flame-Droplet Interaction: A Direct Numerical Simulation Study2015 / Daniel H. Wacks, Nilanjan Chakraborty, Epaminondas Mastorakos
-
Application of Fractal Grids in Industrial Low-Swirl Combustion2015 / G. D. ten Thij, A. A. Verbeek, T. H. van der Meer
-
Lignocellulosic Biomass Feeding in Biogas Pathway: State of the Art and Plant Layouts
Abstract The traditional pathway for biogas production consists in the anaerobic digestion of starchy and sugar biomass mainly from dedicated energy crops, needing agricultural land and heavy irrigation. A retrofitting of the existing biogas plants...
2016 / Franco Cotana, Gianluca Cavalaglio, Alessandro Petrozzi, Valentina Coccia -
Packed Bed Chemical Looping Platform: Design and Operation of 30kWth Pilot Unit
Abstract Chemical looping combustion is a novel flameless combustion, where the conventional combustion is divided into reducer and oxidizer with assistance of the oxygen carrier. Due to its instinctive CO2 separation, high efficient and...
2016 / Xiuning Hua, Jie Zhu, Xiaoshuang Wu, Zhou Xia, Zhou Deng, et al. -
Solid Formation in Piperazine Rate-based Simulation
Abstract Piperazine is a promising solvent for reducing CO2 emissions. It can be applied for the post-combustion capture process and it has limited degradation and fast kinetics. However, precipitation and slurry formation still represent a...
2014 / Jozsef Gaspar, Kaj Thomsen, Nicolas von Solms, Philip Loldrup Fosbøl -
Dataset of working conditions and thermo-economic performances for hybrid organic Rankine plants fed by solar and low-grade energy sources
Abstract This article provides the dataset of operating conditions of a hybrid organic Rankine plant generated by the optimization procedure employed in the research article “A genetic optimization of a hybrid organic Rankine plant for solar and...
2016 / Domenico Scardigno, Emanuele Fanelli, Annarita Viggiano, Giacobbe Braccio, Vinicio Magi -
The Hydrodynamics of Grit Particles Moving Round a Bend using CFD Modelling2011 / Titiksh Patel, Laurence Gill
-
Improving the Efficiency of Dehydrogenation Catalyst Resource while Reducing the H2 Gas Circulation Rate
Abstract In the research the various ways of increasing the selectivity of the dehydrogenation process and reducing the intensity of coke formation have been studied. All results were received by means of the mathematical model of the...
2014 / E.N. Ivashkina, E.D. Ivanchina, E.V. Frantsina, E.D.V.V. Platonov, P.А. Glik, et al. -
Combined in Silico Optimization of Solvents and Operating Conditions for Carbon Capture Processes
Abstract The carbon capture process requires a large amount of energy resulting in reduction in power plant power output. This energy penalty must be reduced in order for carbon capture and sequestration (CCS) to become a viable option for reducing...
2014 / Abdul Qadir, Suraj Sharma, Ali Abbas -
A Virtual Particle Images Generation System for 3D-PTV Verification
Abstract The paper describes a virtual particle images generation system for 3D-PTV (Particle Tracking Velocimetry) verification. It's used for evaluating the accuracy of PTV algorithms and simulating the real experimental setup. At the first time,...
2015 / Chengwu Wang, Zhen Wei -
Mild desalination demo pilot: New normalization approach to effectively evaluate electrodialysis reversal technology
Abstract Key performance indicators for characterization of nanofiltration performance are well developed, similar key performance indicators for electrodialysis reversal are however underdeveloped. Under the E4Water project Dow Benelux BV and...
2016 / Roel Bisselink, Wim de Schepper, Jorg Trampé, Wilbert van den Broek, Ingrid Pinel, et al. -
Mainstream partial nitritation and anammox: long-term process stability and effluent quality at low temperatures
Abstract The implementation of autotrophic anaerobic ammonium oxidation processes for the removal of nitrogen from municipal wastewater (known as “mainstream anammox”) bears the potential to bring wastewater treatment plants close to energy autarky. ...
2016 / Michele Laureni, Per Falås, Orlane Robin, Arne Wick, David G. Weissbrodt, et al. -
What Kind of Modern “Green” Chemical Engineering is Required for the Design of the “Factory of Future”?
Abstract Confronted with the globalization of the markets, acceleration of partnerships and innovation, and to offer a contribution to the fight against environmental destruction and non sustainable behaviour of the today world production, the...
2016 / Jean-Claude Charpentier -
Efficient Utilization of Industrial Excess Heat for Post-combustion CO2 Capture: An Oil Refinery Sector Case Study
Abstract A key issue in post-combustion carbon capture is the choice of absorbent. In this paper two different absorbents, monoethanolamine (MEA) and ammonia (NH3), have been modeled in Aspen Plus at different temperatures for possible...
2014 / Viktor Andersson, Henrik Jilvero, Per-Åke Franck, Fredrik Normann, Thore Berntsson -
Emulsification of Water and Pyrolysis Oil
Abstract Emulsification of pyrolysis oil produced from recycled high-density polyethylene (HDPE) was experimentally investigated. Pyrolysis oil was made from recycled HDPE pellets using a pyrolyzer operated under cascade heating steps and heating...
2015 / Prakorn Kittipoomwong, Monpilai Narasingh -
The importance of correct modeling of bubble size and condensation in prediction of sub-cooled boiling flows2012 / S. Lo, A. Splawski, B. Yun
-
Numerical Investigation of Classical and Bypass Transition in Streamwise Corner-flow
Abstract The laminar-turbulent transition of the flow in a zero-pressure-gradient streamwise corner is investigated by means of direct nu- merical simulation (DNS). Two basic scenarios are considered: transition caused by harmonic...
2015 / Oliver T. Schmidt, Ulrich Rist -
Experimental studies into the thermal-hydraulic performance of the VK-300 reactor based on a draft tube model
Abstract The paper presents an experimental study into the thermal-hydraulic performance of the VK-300 reactor based on a model of a single draft tube at a pressure of 3.4MPa, various flow rates and the model inlet relative enthalpies of –0.05 to...
2016 / N.P. Serdun, V.I. Ignatenko, G.S. Kotikov