Chemical engineering topic list of research papers
-
On the Unsteady Behavior of the Flow Around NACA 0012 Airfoil with Steady External Conditions at Re=10002015 / Dilek Funda Kurtulus
-
Impact of Water on EHL Film Thickness of Lubricating Greases in Rolling Point Contacts2016 / F. Cyriac, P. M. Lugt, R. Bosman, C. H. Venner
-
Austenite Formation from Martensite in a 13Cr6Ni2Mo Supermartensitic Stainless Steel2016 / A. Bojack, L. Zhao, P. F. Morris, J. Sietsma
-
New wall drag and form loss models for one-dimensional dispersed two-phase flow
Abstract It had been disputed how to apply wall drag to the dispersed phase in the framework of the conventional two-fluid model for two-phase flows. Recently, Kim et al. [1] introduced the volume-averaged momentum equation based on the equation of...
2015 / Byoung Jae Kim, Seung Wook Lee, Kyung Doo Kim -
Effects of hydrodynamic cavitation on dry mill corn ethanol production
Abstract In this study, the ability of hydrodynamic cavitation pretreatment (HC) to increase ethanol yields at dry mill corn ethanol plants was investigated at pilot scale. Experiments were conducted at four HC energy densities, with and without jet ...
2016 / David A. Ramirez-Cadavid, Oleg Kozyuk, Parker Lyle, Frederick C. Michel -
Effect of static mixer geometry on flow mixing and pressure drop in marine scr applications2015 / Taewha Park, Yonmo Sung, Taekyung Kim, Inwon Lee, Gyungmin Choi, et al.
-
Modeling of Reactor of Straight–run Gasoline Fractions Refining on Zeolite Catalysts
Abstract Zeolites are widely used as catalysts and catalyst supports for fuel and lubricants production processes with enhanced performance properties. Design of industrial reactor requires the construction of a mathematical model and selection of...
2015 / M.A. Samborskaya, V.V. Mashina, O.A. Cherednichenko, A.V. Makarovskikh -
Optimization of sulfuric acid hydrolysis conditions for preparation of nanocrystalline cellulose from enzymatically pretreated fibers2016 / Facundo Beltramino, M. Blanca Roncero, Antonio L. Torres, Teresa Vidal, Cristina Valls
-
“Law of the nano-wall” in nano-channel gas flows2016 / Murat Barisik, Ali Beskok
-
Carbon capture from natural gas combined cycle power plants: Solvent performance comparison at an industrial scale2015 / Mahdi Sharifzadeh, Nilay Shah
-
Alumina Coating To Realize Desired Pore Characteristics Of Sintered Diatomite Membrane2015 / J.-H. Ha, Y.-H. Park, I.-H. Song
-
Numerical Analysis and Structure Improvement for the Corrosion and Cracking of the Mixing Tee for the Quenching Gas of Hydrogen from Coal
Abstract The gully shape thinning due to corrosion often occurs in the cold and hot syngases mixing tee and its downstream straight pipe used in the gas quenching system of the coal gasification process, and leads to leakage and cracking of the pipe ...
2015 / B.J. Gao, H.J. Li, Y.F. Chen, J.H. Dong -
Assessment of CO2 Bubble Generation Influence on Direct Methanol Fuel Cell Performance
Abstract Fuel cells fed directly by liquid methanol represent a class of suitable devices for supply portable small power applications. To become a market attractive technology some issues must be properly addressed and resolved. The presence of...
2015 / Andrea Calabriso, Domenico Borello, Luca Cedola, Luca Del Zotto, Simone Giovanni Santori -
Effects of intermediate wettability on entry capillary pressure in angular pores
Abstract Entry capillary pressure is one of the most important factors controlling drainage and remobilization of the capillary-trapped phases as it is the limiting factor against the two-phase displacement. It is known that the entry capillary...
2016 / Harris Sajjad Rabbani, Vahid Joekar-Niasar, Nima Shokri -
Operation with Combined Oxides of Manganese and Silica as Oxygen Carriers in a 300 Wth Chemical-looping Combustion Unit
Abstract Chemical-looping combustion is a carbon capture technology which has received increased attention during the last years. The technology is based on fuel oxidation with oxygen provided by solid oxygen carrier particles. In this study two...
2014 / Malin Källén, Magnus Rydén, Tobias Mattisson, Anders Lyngfelt -
Thermographic particle velocimetry (TPV) for simultaneous interfacial temperature and velocity measurements
Abstract We present an experimental technique, that we refer to as ‘thermographic particle velocimetry’ (TPV), which is capable of the simultaneous measurement of two-dimensional (2-D) surface temperature and velocity at the interface of multiphase...
2016 / Alexandros Charogiannis, Ivan Zadrazil, Christos N. Markides -
Lubricated Transport of Highly Viscous Non-newtonian Fluid as Core-annular Flow: A CFD Study
Abstract In this work, we investigate Core Annular Flow (CAF) using computational techniques for the case in which the core fluid is non-Newtonian and the annular fluid is Newtonian. The CAF is simulated using the CFD software ANSYS FLUENT 14.5 in a ...
2015 / Sumit Tripathi, Amitabh Bhattacharya, Ramesh Singh, Rico F. Tabor -
Water and detergent recovery from rinsing water in an industrial environment
Abstract Wash water streams coming from rinsing of equipment in a detergent production site is in many cases considered as waste. On site treatment in waste water plants is possible but typically requires advanced oxidation process (AOP) technology...
2016 / Eddy Linclau, Johan Ceulemans, Kristien De Sitter, Peter Cauwenberg -
Mixing performance comparison of milliscale continuous high-shear mixers2015 / Jussi Tamminen, Tuomas Koiranen
-
Techno-economic analysis of biodiesel and ethanol co-production from lipid-producing sugarcane2016 / Haibo Huang, Stephen Long, Vijay Singh