Chemical engineering topic list of research papers
-
CaZrO3 and SrZrO3-based CuO Oxygen Carriers for Chemical-looping with Oxygen Uncoupling (CLOU)
Abstract The chemical-looping combustion (CLC) and chemical-looping with oxygen uncoupling (CLOU) processes are novel solutions for efficient combustion with inherent separation of carbon dioxide. In this work, oxygen carriers based on CuO supported ...
2014 / Mehdi Arjmand, Abdul-Majeed Azad, Henrik Leion, Magnus Rydén, Tobias Mattisson -
Demonstration of a post-combustion carbon capture pilot plant using amine-based solvents at the Łaziska Power Plant in Poland2015 / Marcin Stec, Adam Tatarczuk, Lucyna Więcław-Solny, Aleksander Krótki, Tomasz Spietz, et al.
-
Effect of Ultrasonic Irradiation on Preparation and Properties of Ionogels2012 / Yogendra Lal Verma, Manish Pratap Singh, Rajendra Kumar Singh
-
Separation of pollutants from restaurant effluents as animal feed, fertilizer and renewable energy to produce high water quality in a compact area
Abstract This paper demonstrates that oil and grease (O & G), chemical oxygen demandSettled (CODS) and chemical oxygen demandTotal-Settled (CODT-S) levels in restaurant wastewater can be reduced to less than 50, 400 and 160mg/L, respectively,...
2013 / H. Chan -
Role of indigenous iron in improving sludge dewaterability through peroxidation2015 / Xu Zhou, Guangming Jiang, Qilin Wang, Zhiguo Yuan
-
Electrochemical Behaviour of Actinides and Fission Products in Room-Temperature Ionic Liquids2011 / K. A. Venkatesan, Ch. Jagadeeswara Rao, K. Nagarajan, P. R. Vasudeva Rao
-
Influence of Temperature, Agitation, Sludge Concentration and Solids Retention Time on Primary Sludge Fermentation2012 / J. Sánchez Rubal, J. A. Cortacans Torre, I. del Castillo González
-
Visualisation of alternating shielding gas flow in GTAW
Abstract The alternating shielding gas technique is a method of achieving transient arc characteristics during arc welding; however the complex flow that occurs through its use has not been investigated previously. A schlieren system was used to...
2015 / I. Bitharas, S.W. Campbell, A.M. Galloway, N.A. McPherson, A.J. Moore -
Stationary rotary force waves on the liquid–air core interface of a swirl atomizer2015 / J. J. Chinn, D. Cooper, A. J. Yule, G. G. Nasr
-
Maximization of natural gas liquids production from an existing gas plant
Abstract It is known that the price of liquefied petroleum gas (LPG) is higher than that of natural gas from which it is derived. So the modification of a natural gas plant to produce LPG instead of lighter hydrocarbon gases is very important in the ...
2015 / Ahmed Abd El-Kader Bhran, Mohamed Hassan Hassanean, Mohamed Galal Helal -
Modeling of H2O2 and UV Oxidation of Organic Pollutants at Wastewater Post-treatment
Abstract For an efficient post-treatment of waste water from dissolved organic impurities drawing on the example of one of the three model objects – BPhB dye, effectiveness of “Advanced Oxidation Methods” was experimentally verified. Individual...
2015 / Elizaveta Simonenko, Alexander Gomonov, Nikolay Rolle, Ludmila Molodkina -
Solar Pyrolysis of Wood in a Lab-scale Solar Reactor: Influence of Temperature and Sweep Gas Flow Rate on Products Distribution
Abstract Experiments of solar pyrolysis of beech wood have been conducted to study the effect of temperature and sweep gas flow rate on the pyrolysis product yields.Investigated variables were pyrolysis temperature, from 600 to 2000°C, and argon...
2015 / K. Zeng, G. Flamant, D. Gauthier, E. Guillot -
Modelling of Heat Transfer in a Fluidized Bed Reactor Irradiated Indirectly by Concentrated Solar Energy
Abstract A two phases model of air heating in bubbling fluidized bed of sand particles with concentrated solar radiation as source of energy is developed. This model is based on the Kato and Wen's model (1969) for the hydrodynamic aspect which was...
2015 / M. Bouhadda, S. Dounit, O. Soulimani -
Scaling of Glycine Nucleation Kinetics with Shear Rate and Glass–Liquid Interfacial Area2015 / Carol Forsyth, Iain S. Burns, Paul A. Mulheran, Jan Sefcik
-
Heat transfer in an annular space fitted with heating isothermal blocks: Numerical bifurcation for low blocks height
Abstract A numerical study of the thermoconvective effects induced by the placement of two heating blocks on the inner surface of an air filled cylindrical annular space is presented. The radii ratio is kept constant R=2. This study investigates the ...
2015 / Ahmed Idrissi, Abdelkhalek Cheddadi, Mohammed T. Ouazzani -
Pilot-scale Evaluations of Advanced Solvents for Postcombustion CO2 Capture
Abstract The Energy & Environmental Research Center (EERC) is leading the Partnership for CO2 Capture (PCO2 C) Program, which focuses on demonstrating CO2 separation and capture technologies at the pilot scale for fossil...
2014 / John P. Kay, Melanie D. Jensen, Nathan J. Fiala -
Characteristics and control mechanisms of coalbed permeability change in various gas production stages2015 / Da-Zhen Tang, Chun-Miao Deng, Yan-Jun Meng, Zhi-Ping Li, Hao Xu, et al.
-
Preliminary Design and Performance Analysis of a Multi-megawatt Scale Dense Particle Suspension Receiver
Abstract A novel receiver concept is presented, based on the use of a dense particle suspension as the heat transfer medium; this medium allows receiver operation at high temperatures (above 650°C), resulting in significant gains in power plant...
2015 / A. Gallo, J. Spelling, M. Romero, J. González-Aguilar -
Hydrodynamics of Biomass Gasification in a Dual Chamber Circulating Fluidized Bed Reactor2016 / Haifa Wahyu, Imam Djunaedi, M Affendi, M. T. Sugiyatno
-
A numerical design and feasibility study of a self-wastage experiment using simulant material in a sodium-cooled fast reactor
Abstract A sodium–water reaction takes place when high-pressured water vapor leaks into sodium through a tiny defect on the surface of the heat transfer tube in a steam generator of the sodium-cooled fast reactor. The sodium–water reaction brings...
2016 / Sunghyon Jang, Takashi Takata, Akira Yamaguchi