Chemical engineering topic list of research papers
-
The crystal structure of 1-(4-(4-chlorophenoxy)-2-chlorophenyl)ethanone, C14H10Cl2O22016 / Chen Lizhen, Wang Jianlong
-
Control of agitation and aeration rates in the production of surfactin in foam overflowing fed-batch culture with industrial fermentation
Abstract Bacillus amyloliquefaciens fmb50 produces a high yield of surfactin, a lipopeptide-type biosurfactant that has been widely studied and has potential applications in many fields. A foam overflowing culture has been...
2015 / Shulin Yao, Shengming Zhao, Zhaoxin Lu, Yuqi Gao, Fengxia Lv, et al. -
Energy balance, greenhouse gas emissions, and profitability of thermobarical pretreatment of cattle waste in anaerobic digestion
Abstract In this study modeled full scale application of thermobarical hydrolysis of less degradable feedstock for biomethanation was assessed in terms of energy balance, greenhouse gas emissions, and economy. Data were provided whether the...
2015 / Jörn Budde, Annette Prochnow, Matthias Plöchl, Teresa Suárez Quiñones, Monika Heiermann -
Kinetic and stoichiometric characterization of organoautotrophic growth of R alstonia eutropha on formic acid in fed-batch and continuous cultures2014 / Stephan Grunwald, Alexis Mottet, Estelle Grousseau, Jens K. Plassmeier, Milan K. Popović, et al.
-
Anomalous Behavior of the Homogeneous Ice Nucleation Rate in “No-Man’s Land”2015 / Hartawan Laksmono, Trevor A. McQueen, Jonas A. Sellberg, N. Duane Loh, Congcong Huang, et al.
-
Assessing the performance of reactant transport layers and flow fields towards oxygen transport: A new imaging method based on chemiluminescence
Abstract A new, simple and precise ex-situ optical imaging method is developed which allows indirect measurement of the partial pressure of oxygen (as ozone) within fuel cell components. Images of oxygen distribution are recorded with higher spatial ...
2014 / Thiago Lopes, Matthew Ho, Biraj K. Kakati, Anthony R.J. Kucernak -
A comparison of magnetic resonance, X-ray and positron emission particle tracking measurements of a single jet of gas entering a bed of particles
Abstract Measurements of the lengths of a single jet of gas entering a packed bed were made using magnetic resonance imaging (MRI), positron emission particle tracking (PEPT) and X-ray radiography and the results compared. The experiments were...
2014 / M. Pore, G.H. Ong, C.M. Boyce, M. Materazzi, J. Gargiuli, et al. -
OxyCAP UK: Oxyfuel Combustion - academic Programme for the UK
Abstract The OxyCAP-UK (Oxyfuel Combustion - Academic Programme for the UK) programme was a £2M collaboration involving researchers from seven UK universities, supported by E.On and the Engineering and Physical Sciences Research Council. The...
2014 / H. Chalmers, M. Al-Jeboori, B. Anthony, S. Balusamy, S. Black, et al. -
The prospects for coal-fired power plants with carbon capture and storage: A UK perspective
Abstract Carbon capture and storage (CCS) facilities coupled to coal-fired power plants provide a climate change mitigation strategy that potentially permits the continued use of fossil fuels whilst reducing the carbon dioxide (CO2) emissions....
2014 / Geoffrey P. Hammond, Jack Spargo -
Large Eddy Simulation and theoretical investigations of the transient cavitating vortical flow structure around a NACA66 hydrofoil
Abstract Compared to non-cavitating flow, cavitating flow is much complex owing to the numerical difficulties caused by cavity generation and collapse. In this paper, the cavitating flow around a NACA66 hydrofoil is studied numerically with...
2014 / B. Ji, X.W. Luo, Roger E.A. Arndt, Xiaoxing Peng, Yulin Wu -
Comparisons of intra-tablet coating variability using DEM simulations, asymptotic limit models, and experiments
Abstract Discrete element method (DEM) computer simulations are used to investigate intra-tablet coating thickness variability. Two new post-processing algorithms are presented. The first algorithm uses an image-based method to track the exposure to ...
2015 / Ben Freireich, Rahul Kumar, William Ketterhagen, Ke Su, Carl Wassgren, et al. -
Process development of short-chain polyols synthesis from corn stover by combination of enzymatic hydrolysis and catalytic hydrogenolysis
Abstract Currently short-chain polyols such as ethanediol, propanediol, and butanediol are produced either from the petroleum feedstock or from the starch-based food crop feedstock. In this study, a combinational process of enzymatic hydrolysis with ...
2014 / Zhen-Hong Fang, Jian Zhang, Qi-Ming Lu, Jie Bao -
The Effect of EDTA on the Nucleation Kinetics and Mechanical Properties of KDP Crystal2012 / A. Rahman, J. Podder
-
On two distinct Reynolds number regimes of a turbulent square jet
Abstract The effects of Reynolds number on both large-scale and small-scale turbulence properties are investigated in a square jet issuing from a square pipe. The detailed velocity fields were measured at five different exit Reynolds numbers of ...
2015 / Minyi Xu, Jianpeng Zhang, Pengfei Li, Jianchun Mi -
Effects of Operation Conditions on the Performance of the ASBR Methane Fermentation of Syrup Wastewater
Abstract Methane fermentation of the syrup wastewater was conducted using the anaerobic sequencing batch reactor (ASBR). Organic loading rate (OLR), which is calculated by dividing the substrate concentration in the wastewater by hydraulic retention ...
2013 / Sang Hagk Kwon, Kiyohiko Nakasaki -
The Synthesis of a Novel Cellulose Physical Gel2014 / Jiufang Duan, Xiaojian Zhang, Jianxin Jiang, Chunrui Han, Jun Yang, et al.
-
Deactivation Pattern of a “Model” Ni/MgO Catalyst in the Pre-Reforming of n-Hexane2014 / Giuseppe Trunfio, Francesco Arena
-
Novel low energy hydrogen–deuterium isotope breakthrough separation using a trapdoor zeolite
Abstract Cs-chabazite, a type of zeolite with caesium counter-cations, possesses interesting gas separation properties due to a highly selective molecular “trapdoor” effect. Herein the use of this material for H2/D2 isotope separation is...
2015 / Andrew J.W. Physick, Dominic J. Wales, Simon H.R. Owens, Jin Shang, Paul A. Webley, et al. -
Copper Iron Conversion Coating for Solid Oxide Fuel Cell Interconnects
Abstract A conversion coating of iron and copper was investigated with the purpose of increasing the performance of Sanergy HT as a potential SOFC interconnect material. Samples were exposed to a simulated cathode atmosphere (air, 3 % H2O) for...
2015 / Jan Gustav Grolig, Patrik Alnegren, Jan Froitzheim, Jan-Erik Svensson -
Heat release rate estimation in laminar premixed flames using laser-induced fluorescence of CH2O and H-atom
Abstract The present work demonstrates the feasibility of heat release rate imaging using the laser-induced fluorescence (LIF) of atomic hydrogen (H-atom) and formaldehyde (CH2O) in laminar premixed flames. The product of H-atom LIF and CH2O LIF...
2016 / Irfan A. Mulla, Aadil Dowlut, Taaha Hussain, Zacharias M. Nikolaou, Satyanarayanan R. Chakravarthy, et al.